Andrea Annunziato

Andrea Annunziato

Auto-generated profile, based on publicly available information

Andrea Annunziato

Department of Electrical and Information Engineering, Politecnico di Bari, Bari, Italy

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 November 2022 in Journal of Lightwave Technology
Verified
Journal Article
Open access
ALAntonella Maria Loconsole
Antonella Maria Loconsole
MFMario Christian Falconi
Mario Christian Falconi
AAAndrea Annunziato
Andrea Annunziato
SCSolenn Cozic
Solenn Cozic
SPSamuel Poulain
Samuel Poulain
Francesco PrudenzanoFrancesco Prudenzano
Francesco Prudenzano
In this work, a novel mid-infrared continuous wave laser, based on a fluoroindate fiber co-doped with holmium and neodymium, is designed to emit at ${{\bm{\lambda }}}_{\bm{s}} = {\bm{\ }}3.92{\bm{\ \mu m}}$ , when pumped at ${{\bm{\lambda }}}_{\bm{p}} = {\bm{\ }}808{\bm{\ nm}}$ . The laser is modeled considering a nine-level system, by taking into account experimental spectroscopical parameters. Since the energy transfer coefficients are unknown, they have been evaluated starting from the measured emission spectra of the bulk glass, reported in literature, and comparing their ratio with respect to the ratio between the simulated signal gain coefficients. The designed laser promises higher slope efficiency and power threshold lower than those obtainable with a holmium-heavily-doped fiber, having same fiber section geometry, same refractive indices and pumped at ${{\bm{\lambda }}}_{\bm{p}} = {\bm{\ }}888{\bm{\ nm}}$ . Slope efficiency ${\bm{\eta \ }} = {\bm{\ }}16.67{\bm{\% }}$ and input power threshold ${{\bm{P}}}_{{\bm{th}}} = {\bm{\ }}0.2{\bm{\ W}}$ are obtained for the fiber length ${{\bm{L}}}_{{\bm{fiber}}} = {\bm{\ }}0.4{\bm{\ m}}$ , dopants concentrations ${{\bm{N}}}_{{\bm{Ho}}} = {\bm{\ }}8 \times {10}^{26}{\bm{\ ions}}/{{\bm{m}}}^3$ and ${{\bm{N}}}_{{\bm{Nd}}} = {\bm{\ }}1 \times {10}^{26}{\bm{\ ions}}/{{\bm{m}}}^3$ , and output mirror reflectivity ${{\bm{R}}}_{{\bm{out}}} = {\bm{\ }}60{\bm{\% }}$ . This result encourages the fabrication of a continuous wave laser based on a Ho:Nd-codoped fluoroindate fiber.

29 November 2023 in Journal of Lightwave Technology
Verified
Journal Article
Open access
Francesco AnelliFrancesco Anelli
Francesco Anelli
AAAndrea Annunziato
Andrea Annunziato
ALAntonella Maria Loconsole
Antonella Maria Loconsole
VPVincenza Portosi
Vincenza Portosi
SCSolenn Cozic
Solenn Cozic
Francesco PrudenzanoFrancesco Prudenzano
Francesco Prudenzano
For the first time, a 2×2 optical fiber coupler based on indium fluoride optical fibers is designed via coupled mode theory, fabricated via fused biconical tapering technique, and characterized in the mid-infrared spectral range. A conventional glass processing system, Vytran GPX-2400, is employed for the 2×2 optical fiber coupler fabrication, overcoming the main limitation related to the narrow temperature range for indium fluoride optical fiber processing. Moreover, the fabricated device exhibits negligible surface crystallizations. The experimental results are in optimum agreement with the simulations, demonstrating that reproducible manufacturing of low-loss fused optical fiber components for the mid-infrared spectral range is possible. In particular, the fabricated 2×2 optical fiber coupler is characterized by a measured coupling ratio CR= 72.2:27.8 at the wavelengthλ = 3.34 μm with low excess loss EL = 0.88 dB

20 January 2023 in Journal of Lightwave Technology
Verified
Journal Article
Open access
Francesco AnelliFrancesco Anelli
Francesco Anelli
AAAndrea Annunziato
Andrea Annunziato
MGMike Godfrey
Mike Godfrey
ALAntonella Maria Loconsole
Antonella Maria Loconsole
CHChristopher Holmes
Christopher Holmes
Francesco PrudenzanoFrancesco Prudenzano
Francesco Prudenzano
A high curvature flexible Bragg grating, in planar technology, is designed, fabricated and experimentally characterized by employing silica glass. The curvature sensing mechanism for slightly off-axis core is theoretically explained and experimentally demonstrated. The electromagnetic behavior of the proposed sensor is investigated through conformal mapping, modal analysis, and coupled-mode theory. The experimental measurement reveals different sensitivities to positive and negative curvatures. The reflection spectrum of the planar Bragg grating sensor and the relationship between its resonant wavelengths and the curvature is measured for a large curvature range up to 1/ R = ± 33 m -1 . The interest toward off-axis core on planar flexible platform for curvature monitoring is due to the lateral stiffness and low Young's modulus of the substrate.

28 June 2022 in Journal of Lightwave Technology
Verified
Journal Article
Open access
Francesco AnelliFrancesco Anelli
Francesco Anelli
AAAndrea Annunziato
Andrea Annunziato
AEAlessia Erario
Alessia Erario
CHChristopher Holmes
Christopher Holmes
Caterina CiminelliCaterina Ciminelli
Caterina Ciminelli
Francesco PrudenzanoFrancesco Prudenzano
Francesco Prudenzano
An innovative microstructured flat optical fiber is designed to obtain a multiaxial strain sensor for composite material monitoring. The sensing regions are constituted by the two eyelets where Bragg gratings are written. To achieve multiaxial sensing, a suitable microstructure is designed close to only one of the eyelets. The effect of the strain field, evaluated via a 3D finite element method approach, is considered to obtain the change of the refractive index distribution. The electromagnetic modal analysis and the coupled mode theory are exploited to evaluate the Bragg wavelength shift for the slow and fast axis fundamental modes, guided in the two eyelets and affecting the sensor response. The designed microstructured flat optical fiber is technologically feasible and promises sensing performance higher than that obtainable with the conventional optical fibers. In addition, flat optical fiber can be embedded in composite materials reducing the drawbacks related to both orientation and excess resin.

26 August 2024 in Journal of Lightwave Technology
Verified
Journal Article
Open access
Francesco AnelliFrancesco Anelli
Francesco Anelli
AAAndrea Annunziato
Andrea Annunziato
ALAntonella Maria Loconsole
Antonella Maria Loconsole
SVSebastien Venck
Sebastien Venck
SCSolenn Cozic
Solenn Cozic
Francesco PrudenzanoFrancesco Prudenzano
Francesco Prudenzano
This manuscript illustrates the design and characterization of the first fiber-based photonic lantern, tailored for an efficient operation in the Mid-Infrared spectral range. The design and fabrication of the proposed device involve the use of three distinct indium fluoride optical fibers into a surrounding low refractive index glass capillary. An adiabatic transition is achieved through a controlled manufacturing process based on heating and drawing. The modal behavior of the photonic lantern is investigated along the transition via electromagnetic modal analysis, at the wavelength ${\bm{\lambda}} \ = \ \text{3.34}\ {\bm{\mu} \mathbf{m}}$ . Mode-group selectivity is obtained through the use of optical fibers with different characteristics. This implies that the light launched into a particular optical fiber evolves into specific mode groups at the photonic lantern multi-mode end. Experimental results demonstrate the possibility to excite the LP 01 mode and two, odd and even, LP 11 propagation modes, with losses below 1.3 dB and 1.7 dB, respectively. These results emphasize the feasibility of the proposed photonic lantern based on indium fluoride glass, with potentials for diverse applications, e.g., in communications, astrophotonics, remote sensing and spectroscopy.

11 May 2023 in Journal of Lightwave Technology
Verified
Journal Article
Open access
MFMario Christian Falconi
Mario Christian Falconi
ALAntonella Maria Loconsole
Antonella Maria Loconsole
AAAndrea Annunziato
Andrea Annunziato
SCSolenn Cozic
Solenn Cozic
SPSamuel Poulain
Samuel Poulain
Francesco PrudenzanoFrancesco Prudenzano
Francesco Prudenzano
In this paper, for the first time, an erbium-doped fluoroindate fiber laser emitting up to 3.91 μm is designed and optimized by means of a numerical investigation performed via a home-made computer code. It is cladding pumped with red light at 635 nm. The employed fiber is commercially available from Le Verre Fluoré and exhibits a double D-shaped geometry. Continuous-wave laser emission is obtained thanks to the population inversion between the 4 F 9/2 and 4 I 9/2 energy levels. The model takes into account measured spectroscopic parameters for the absorption, stimulated emission and spontaneous decay processes. The device performance is investigated by varying several parameters, such as the input pump power, the fiber length, the dopant concentration, the output mirror reflectivity and the signal wavelength. The proposed device is very versatile and is optimized for different scenarios, including: the shortest fiber, the highest output power and the lowest threshold. Simulation results show that the best performance in terms of emission bandwidth is obtained for the laser with the lowest threshold, i.e., only 25 mW, predicting a broadband coherent emission in the 3.25--3.91 μm wavelength range and paving the way to the fabrication of a low-cost and easy-to-pump middle infrared fiber laser.