In this review paper some recent advances on optical sensors based on photonic crystal fibres are reported. The different strategies successfully applied in order to obtain feasible and reliable monitoring systems in several application fields, including medicine, biology, environment sustainability, communications systems are highlighted. Emphasis is given to the exploitation of integrated systems and/or single elements based on photonic crystal fibers employing Bragg gratings (FBGs), long period gratings (LPGs), interferometers, plasmon propagation, off-set spliced fibers, evanescent field and hollow core geometries. Examples of recent optical fiber sensors for the measurement of strain, temperature, displacement, air flow, pressure, liquid-level, magnetic field, and hydrocarbon detection are briefly described.

For the first time, to the best of our knowledge, the design and characterization of a 3 × 1 fused fiber combiner based on multimode step-index fluoroindate optical fibers (InF₃) has been performed. Several efforts to develop a well-consolidated normalization procedure and a fabrication protocol have been required due to the low melting temperature and the mechanical properties of fluoroindates. Fabrication results demonstrate repeatability and absence of crystallization. Therefore, the described fabrication process paves the way for manufacturing fluoroindate devices. The electromagnetic design of the combiner is carried out through modal investigation and beam propagation method by computing the transmission efficiency. The experimental results agree with the simulation and demonstrate the device feasibility to operate in the mid-infrared spectral range.

In this review paper some recent advances on optical fiber sensors are reported. In particular, fiber Bragg grating (FBG), long period gratings (LPGs), evanescent field and hollow core optical fiber sensors are mentioned. Examples of recent optical fiber sensors for the measurement of strain, temperature, displacement, air flow, pressure, liquid-level, magnetic field, and the determination of methadone, hydrocarbons, ethanol, and sucrose are briefly described.

A compact amplifier based on chalcogenide Pr³⁺-doped micro-disk coupled to two ridge waveguides is designed and refined by means of a home-made computer code. The gain G ≈ 7.9 dB is simulated for a Pr³⁺ concentration of 10 000 ppm, input signal power of −30 dBm at the wavelength 4.7 µm and input pump power of 50 mW at the wavelength 1.55 µm. In the laser behavior, i.e. without input signal, the maximum slope efficiency S = 8.1 × 10⁻⁴ is obtained for an input pump power of 2 mW. This value is about six times higher than that simulated for an optimized erbium-doped micro-disk.

In this work, the inverted micro-Stereolithography (SLA) is used to show the potential of such additive manufacturing (AM) technology at prototyping super-shaped dielectric resonator antennas (S-DRAs) rapidly and accurately. The S-DRAs, which exhibit 3D complex geometries, were designed to operate at 3.5 GHz, suitable for the assessment of 5G communications in the mid band. Initially, a cross-starred-shaped S-DRA was designed and manufactured via the inverted micro-SLA by means of a photopolymer resin as material. As no information about the used material was available from literature and supplier, the dielectric properties of the photopolymer resin were characterized. Moreover, in the view of challenging further the SLA capability, several prototypes, based on the cross star shaped geometry but exhibiting a twist of variable angles along the longitudinal axis, were fabricated and tested. In order to compare the antennas performance in relation to the material volume and sizes, rectangular and cylindrical DRAs were also realized using same material and technology. Scattering parameter S11, gain, bandwidth (BW), efficiency and co- and cross-polarization of all antennas were measured. The experimental results showed that twisted S-DRAs exhibit same performance of the basic cross-starred-shaped antenna, due to the invariance to symmetry of the basic Gielis geometry. The measured gain is about 2.5 dB over a range of 1 GHz in the frequency range of interest; the BW measured for all S-DRAs is about 10%, whereas the efficiency is about 80% at 3.5 GHz. Finally, better performance in terms of bandwidth is shown by the S-DRAs, considering their dramatic volume reduction (~85%) compared to classic rectangular and cylindrical DRAs and other DRA examples already reported in the state of the art.

A review on the recent progress in modeling and fabrication of medium infrared (Mid-IR) fiber lasers is reported. The main objective is to illustrate some recent examples of continuous wave optical sources at wavelengths longer than those commonly employed in telecom applications and allowing high beam quality. A small number of Mid-IR lasers, among the large variety of schemes, glasses, dopants and pumping schemes reported in literature, is selected on the basis of their slope efficiency and threshold pump power. In particular, tellurite, fluoride and chalcogenide fiber lasers are considered. More details are given with reference to the novel pumping schemes.