Severe diaphragm dysfunction can lead to respiratory failure and to the need for permanent mechanical ventilation. Yet permanent tethering to a mechanical ventilator through the mouth or via tracheostomy can hinder a patient’s speech, swallowing ability and mobility. Here we show, in a porcine model of varied respiratory insufficiency, that a contractile soft robotic actuator implanted above the diaphragm augments its motion during inspiration. Synchronized actuation of the diaphragm-assist implant with the native respiratory effort increased tidal volumes and maintained ventilation flow rates within the normal range. Robotic implants that intervene at the diaphragm rather than at the upper airway and that augment physiological metrics of ventilation may restore respiratory performance without sacrificing quality of life.
5 April 2023 in IEEE Robotics and Automation Letters
In recent years, the use of fabric to manufacture and integrate soft actuators and sensors into wearable robots elucidates the benefits of soft robotic technology, closing the gap between humans and machines. However, many limitations in terms of ease of manufacturing, customization, modeling, output force and control remain unsolved and reduce the number of practical applications of fabric-based soft robotic systems. To address these limitations, we propose the use of laser-cut fabric shells laminated onto thermoplastic polyurethane as a pneumatic bending soft actuator. In this letter the design, fabrication, modeling, and control of a fabric shelled bending actuator is presented. Our experiments suggest that the fabric-shelled actuators are highly tunable and usable for high force applications. Moreover, the finite element model developed can predict the behavior of different fabric shelled actuator designs. Finally, we show how precise control of the actuators can be achieved by the implementation of a feedback curvature control system.
Multiple human tissues exhibit fibrous nature. Therefore, the fabrication of hydrogel filaments for tissue engineering is a trending topic. Current tissue models are made of materials that often require further enhancement for appropriate cell attachment, proliferation and differentiation. Here we present a simple strategy, based on the use of surface chaotic flows amenable to mathematical modeling, to fabricate continuous, long and thin filaments of gelatin methacryloyl (GelMA). The fabrication of these filaments is achieved by chaotic advection in a finely controlled and miniaturized version of the journal bearing system. A drop of GelMA pregel is injected on a higher-density viscous fluid (glycerin) and a chaotic flow is applied through an iterative process. The millimeter-scale hydrogel drop is exponentially deformed and elongated to generate a meter-scale fiber, which was then polymerized under UV-light exposure. Computational fluid dynamic (CFD) simulations are conducted to determine the characteristics of the flow and design the experimental conditions for fabrication of the fibers. GelMA fibers were effectively used as scaffolds for C2C12 myoblast cells. Experimental results demonstrate an accurate accordance with CFD simulations for the predicted length of the fibers. Plant-based viral nanoparticles (i.e. Turnip mosaic virus ; TuMV) were then integrated to the hydrogel fibers as a secondary nano-scaffold for cells for enhanced muscle tissue engineering. The addition of TuMV significantly increased the metabolic activity of the cell-seeded fibers ( p * < 0.05), strengthened cell attachment throughout the first 28 d, improved cell alignment, and promoted the generation of structures that resemble natural mammal muscle tissues. Chaotic two-dimensional-printing is proven to be a viable method for the fabrication of hydrogel fibers. The combined use of thin and long GelMA hydrogel fibers enhanced with flexuous virions offers a promising alternative for scaffolding of muscle cells and show potential to be used as cost-effective models for muscle tissue engineering purposes.
The diaphragm is a critical muscle for respiration, responsible for up to 70% of the inspiratory effort. Standard treatment for patients with severe diaphragm dysfunction is permanently tethering the airway to a mechanical ventilator, which greatly impacts patient autonomy and quality of life. Soft robots are ideal to assist in complex biological functions, such as diaphragm contraction. This article introduces a soft robotic diaphragm‐assist device designed as a therapeutic treatment for diaphragm dysfunction, moreover a clinically relevant respiratory simulator is designed and proposed as a validation and testing tool for this treatment. The device uses fabric‐based pneumatic actuators to provide targeted mechanical assistance during inhalation. A two‐step control system is implemented to optimize synchronization and support: 1) detecting breath intention from the pleural pressure signal to trigger the device and 2) regulating the device's input pressure to assist in inhalation. Using the respiratory simulator, the device demonstrated the ability to restore pleural and abdominal pressures and significantly increased transdiaphragmatic pressure during simulated conditions of diaphragm dysfunction. This research advances the field of soft robotics in respiratory care, providing a foundational platform for the development of next‐generation therapeutic devices aimed at improving the quality of life for patients with diaphragm dysfunction.