1 January 2009 in IFAC Proceedings Volumes
1 February 2019 in Journal of Energy Storage
1 December 2017 in IEEE Transactions on Control Systems Technology
The blade pitch system is a critical subsystem of variable-speed variable-pitch wind turbines that is characterized by a high failure rate. This paper addresses the fault detection and isolation (FDI) of a blade pitch system with hydraulic actuators. Focus is placed on incipient multiplicative faults, namely hydraulic oil contamination with water and air, bearing damage resulting in increased friction, and drop of the supply pressure of the hydraulic pump. An active model-based FDI approach is considered, where changes in the operating conditions (i.e., mean wind speed and turbulence intensity) are accounted through the identification of a linear parameter-varying model for the pitch actuators. Frequency-domain estimators are used to identify continuous-time models in a user-defined frequency band, which facilitates the design of the FDI algorithm. Besides, robustness with respect to noise in measurements and stochastic nonlinear distortions is ensured by estimating confidence bounds on the parameters used for FDI. The approach is thoroughly validated on a wind turbine simulator based on the FAST software that includes a detailed physical model of the hydraulic pitch system. This paper presents the design methodology and validation results for the proposed FDI approach. We show that an appropriate design of the excitation signal used for active fault detection allows an early fault diagnosis (except for oil contamination with water) while ensuring a short experiment duration and an acceptable impact on the wind turbine operation.
23 December 2021 in IEEE Transactions on Control Systems Technology
A constrained feedback control strategy designed on the basis of a simplified electrochemical–thermal model is considered for the fast and healthy charging of a lithium-ion battery cell. The constraints ensure avoidance of side reactions and operating modes that yield premature aging (healthier charging). They are enforced through a reference governor approach, hence requiring a low computational burden. A systematic approach is presented for model identification and control law design. The method is first validated on a detailed battery simulator based on the Doyle–Fuller–Newman model combined with a thermal model. Next, it is validated experimentally through battery-in-the-loop long-term aging campaigns, and the results show that the charging time is reduced by 22% while simultaneously ensuring a longer lifetime (26% less capacity degradation) compared to a 2C constant-current/constant-voltage (CCCV) approach. Compared to recommended C/2 CCCV, our method charges the battery 70% faster and degrades it similarly despite more demanding operating conditions.
4 November 2022 in Energy
20 September 2024 in IEEE Transactions on Automatic Control
This article studies the problem of interval estimation for systems with nonlinear equality constraints and unknown but bounded uncertainties. An iterative zonotope-based method is presented to compute accurate interval bounds of system states. To manage the nonlinear constraints, we utilize a Taylor expansion and consider the dependence in the remainder. Furthermore, to determine the optimal zonotopic enclosures of the intersection of two zonotopes, the widths of the smallest intervals enclosing zonotopes are used as the size criterion. Numerically efficient linear programming is used for solving the associated optimization problems. A simulation on a ground vehicle example shows that the proposed method can provide accurate interval estimation results.