Huan Yu

Huan Yu

Auto-generated profile, based on publicly available information

Huan Yu

Shandong Provincial Key Laboratory of High Strength Lightweight Metallic Materials, Advanced Materials Institute, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 July 2024 in Metals
Verified
Journal Article
Open access
PDF file
CLChangxing Li
Changxing Li
XFXuansheng Feng
Xuansheng Feng
JZJixue Zhou
Jixue Zhou
Guochen ZhaoGuochen Zhao
Guochen Zhao
KCKaiming Cheng
Kaiming Cheng
XWXitao Wang
Xitao Wang
As a typical spinel structure material, ZnMn2O4 has been widely researched in the field of electrode materials. However, ZnMn2O4 nanoparticles as electrode materials for supercapacitors have the disadvantages of low conductivity, inferior structural integrity, and easy aggregation, resulting in unsatisfying electrochemical performance. In this work, we use a hydrothermal method and high-temperature calcination to deposit ZnMn2O4 nanoparticles on carbon cloth and explore the influence of hydrothermal reaction time on the deposition morphology and distribution of ZnMn2O4 nanoparticles on carbon cloth. The deposition process of ZnMn2O4 nanoparticles on carbon cloth was analyzed, and a ZMO-9 electrode was deduced to be the most suitable electrode for supercapacitors. A series of electrochemical performance tests show that the ZMO-9 electrode has excellent specific capacitance (specific capacity) (499 F·g−1 (299.4 C·g−1) at a current density of 1 A·g−1) and rate performance (75% capacitance retention at a current density of 12 A·g−1). The assembled asymmetric supercapacitor has an energy density of 46.6 Wh·kg−1 when the power density is 800.1 W·kg−1. This work provides a reference for the structural design of ZnMn2O4 supercapacitor electrode materials and the improvement of electrochemical properties.

23 March 2022 in Coatings
Verified
Journal Article
Open access
PDF file
HLHuikun Liu
Huikun Liu
Guochen ZhaoGuochen Zhao
Guochen Zhao
HLHang Li
Hang Li
STShouqiu Tang
Shouqiu Tang
DXDapeng Xiu
Dapeng Xiu
JZJixue Zhou
Jixue Zhou
Considering the advantage of safety and cost, designing a Mg–air battery with high capacity has been highly sought in recent years. However, self-corrosion and passivation of Mg anode critically reduce discharge performance, hindering the large-scale application of Mg–air batteries. In this study, a series of as-cast and extruded Mg-3In-xCa alloys were successfully fabricated. Microstructures, chemical composition, and discharge performance were investigated to optimize the content of Ca (x). The selected Mg–air battery with Mg-3In-3Ca alloy as anode represented the best battery performance, including 0.738 V of discharge voltage, 1323.92 mAh g−1 of specific capacity, and 61.74% of anodic efficiency at discharge current density of 30 mA cm−2. All of its parameters were vastly superior to pure Mg–air battery. In addition, the synergistic effects of In and Ca on promoting electrode properties were evaluated in detail, using SEM and electrochemical analysis, which is expected to trigger follow-up research in designing high-performance Mg–air batteries.

11 October 2022 in Materials
Verified
Journal Article
Open access
PDF file
RWRongrong Wang
Rongrong Wang
YHYejin Han
Yejin Han
HYHuan Yu
Huan Yu
QSQian Su
Qian Su
HLHang Li
Hang Li
WJWei Ju
Wei Ju
The involvement of magnesium matrix composite enhanced by metal particles, the development of low lattice mismatch interface, and the refining of particle size are all of great significance in improving strengthening efficiency. In this work, nano-crystalline Ti/Mg-9Al-Zn-0.3Mn composites were prepared by mechanical milling. The microstructure was characterized and the mechanical property was measured. After mechanical milling, the grain of the Mg matrix was refined to ~72 nm. Ti particles were smashed to submicron scale, and dispersed in the Mg matrix. In total, 68% of Ti particles were nano-scale and the average particle size was 133 nm. A nano-scale Mg17Al12 precipitate was found and the average particle size was approximately 44 nm. Meanwhile, coherent interfaces of Ti/Mg and Mg17Al12/Mg were observed, and it was found that the (101)Mg plane and (100)Ti plane inclined 12° and [044]Mg17Al12 was parallel to [010]Mg. The hardness of the milled Ti/Mg-9Al-Zn-0.3Mn composite was 1.98 GPa, 247% higher than the initial alloy. Milled Mg-9Al-Zn-0.3Mn alloy under the same preparation processing was used as a comparison, and the value of hardness was 1.53 GPa. Tiny Ti particles displayed excellent strengthening efficiency. Strengthening mechanisms of the milled Ti/Mg-9Al-Zn-0.3Mn composite were analyzed and the main strengthening mechanisms included the strengthening of grain boundary strengthening, Orowan strengthening, dislocation strengthening, solid solution strengthening and load-bearing strengthening, which accounted for 56.3%, 18.2%, 17.4%, 4.7% and 3.5%, respectively.

1 March 2024 in Vacuum
Verified
Journal Article
Closed access
JZJixue Zhou
Jixue Zhou
YHYejin Han
Yejin Han
HYHuan Yu
Huan Yu
PZPeng Zhang
Peng Zhang
QSQian Su
Qian Su
LHLianxi Hu
Lianxi Hu

4 July 2024 in Coatings
Verified
Journal Article
Open access
PDF file
HLHang Li
Hang Li
Guochen ZhaoGuochen Zhao
Guochen Zhao
HYHuan Yu
Huan Yu
KCKaiming Cheng
Kaiming Cheng
XFXuansheng Feng
Xuansheng Feng
ZSZhizhuang Sun
Zhizhuang Sun
The present paper reported a novel bipolar-pulse cathodic plasma electrolytic deposition (BP-CPED) technique with a low current density. This newly developed CPED technique can break down the barriers of the existing CPED technique with higher current density. In this report, ceramic coatings were successfully prepared on aluminum alloy via the BP-CPED technique in an aqueous carbamide-based electrolyte. Data recording results in the reacting process show that there is the current density of the cathode below 0.15 A/cm2 and that of the anode below 0.035 A/cm2, which approximately reaches the level of conventional MAO technique. Interestingly, the addition of PEG into the electrolyte can further reduce the current density and effectively improve the coating quality. The kinetic of the BP-CPED process was discussed based on the evolution of current density/voltage-time curves and spark discharge phenomena. SEM observations illustrate that BP-CPED coatings possess a typical porous-surface feature. XRD analysis indicates that the coating was mainly composed of Al2O3 and Al4C3. Al2O3/Al4C3/ZrO2 composite coatings fabricated after Zr-doping reflected the successful Zr-incorporation into the coating, which demonstrated that the BP-CPED technique can be used to design the coating composition by the doping modification. The direct pull-off and thermal shock tests confirmed that new BP-CPED coatings obtained under the cathodic plasma discharge have excellent bonding strength. It is possible that this novel BP-CPED technique can provide a promising choice in developing the large-area CPED surface treatment for the industrial application.

16 January 2025 in Materials
Verified
Journal Article
Open access
PDF file
XZXiaodong Zhu
Xiaodong Zhu
KCKaiming Cheng
Kaiming Cheng
JWJin Wang
Jin Wang
JLJianbo Li
Jianbo Li
JWJingya Wang
Jingya Wang
YDYong Du
Yong Du
To provide insight into the interface structure in Ti particle-reinforced Mg matrix composites, this study investigates the inherent Mg/Ti interface structure formed during the solidification of supercooled Mg melt on a (0001)Ti substrate using ab initio molecular dynamics (AIMD) simulations and density function theory (DFT) calculation. The resulting interface exhibits an orientation relationship of 0001Mg//0001Ti with a lattice mismatch of approximately 8%. Detailed characterizations reveal the occurrences of 0001Mg plane rotation and vacancy formation to overcome the lattice mismatch at the inherent Mg/Ti interface while allowing Mg atoms to occupy the energetically favorable hollow sites above the Ti atomic layer. The atomic diffusion behaviors of rare-earth elements Gd and Y at the Mg/Ti interface was examined using the climbing image nudged elastic band (CI-NEB) method, demonstrating a strong segregation tendency towards the interface promoted by the inherent interface structure. Additionally, the calculated Griffith work indicates enhanced interfacial adhesion due to the segregation of Gd and Y, which is beneficial for the mechanical properties of the composite.