In the present work, we study the dielectric behavior of various ternary mixtures composed of epoxy resin (RE), of one of three different titanates (barium titanate, BaTiO3; calcium titanate, CaTiO3; magnesium titanate, MgTiO3) respectively with one of three oxides (calcium oxide, CaO; manganese dioxide, MnO2; zinc oxide, ZnO) using time domain reflectometry (TDR). The different composites are mixed at room temperature in different volume fractions keeping the epoxy resin at a constant volume fraction. Several mixture combinations are studied to see the oxides influence on the titanates dielectric behavior in the range from DC to 10 GHz. This is done through the experimental determination of the dielectric constant ε s. A noticeable effect has been recorded at the low frequency and which consists of an increase of this dielectric permittivity when growing the volume fraction of manganese dioxide. One meaningful point of this study is the lowest static conductivity value (8.017 × 10 −3 /(Ωm)) being reached with an incursion of 7.5% of MnO2 in a ternary mixture composed of RE, MgTiO3 and MnO2. In addition, the behavior obtained experimentally has been validated by the Lichtenecker modified model. This study interest lies on an application of these materials in microelectronics and particularly in telecommunication components manufacturing.
1 October 2018 in The European Physical Journal Applied Physics
The main objective of this paper is to study the dielectric behavior of a quaternary composite, made from a mixture of barium titanate (BT), manganese dioxide (MnO2) and calcium oxide (CaO) in the same epoxy resin matrix (RE) maintained at 70% by volume fraction, while those of the other constituents are variable and completing each other in a way to achieve the remaining proportion, i.e. 30%. Random mixtures are made at room temperature and under atmospheric pressure. A dielectric characterization of this mixture type was performed by time-domain spectroscopy (TDS) over a frequency wide band (DC–2 GHz). This has been carried out to illustrate the effect of two oxides (MnO2 and CaO) simultaneously at low frequency (500 MHz), in the presence of (BT), on the composite dielectric behavior. This has led consequently to make a comparison between the present acquired results and those of the ternary composite, where (MnO2) and (CaO) act separately. The results obtained so far in this study allowed us to check the validity of the modified Lichtenecker law (MLL)-based predictive model in the quaternary composite case. The interest of this study lies on applications of these materials in microelectronics circuits and absorber materials in telecommunication domain.
1 November 2016 in The European Physical Journal Applied Physics
The aim of this paper is to study and to model the dielectric behavior of various ternary composites prepared with epoxy resin (RE), one type of titanates (magnesium titanate MgTiO3, calcium titanate CaTiO3, strontium titanate SrTiO3, and barium titanate BaTiO3) with carbon black (CB). The study has therefore been focused on the effect of adding carbon black to titanate included in an epoxy matrix. The effects have been quantified according to the volume fraction of carbon black. In this work, we present a method based on nonlinear optimization for determining the permittivity of the every constituent, in order to minimize systematic errors and mount the effect of carbon black. The time domain reflectometry (TDR) approach is used to characterize the samples under test in the range from DC to 10 GHz. The conductivity behavior study is performed at a low frequency of 400 MHz, throughout this work. We explain the carbon black effect on the ternary mixtures by using the substitution principle for predicting their dielectric behavior. The experimental results confirm the concordance with the modified Lichtenecker mixture law. To predict the electromagnetic behavior of the ternary composites in quantitative manner, we use a numerical optimization method for identification the parameters of the theoretical model. Finally, these materials find their interest in the miniaturization of electronic components used in microelectronic and telecommunication applications.
1 July 2022 in ECS Journal of Solid State Science and Technology
The purpose of this article is to study the dielectric dispersion of two different ternary composites made of epoxy resin (RE), black iron oxide (Fe3O4) with one of the two titanates (calcium titanate (CaTiO3) or strontium (SrTiO3)) on several frequency bands. Additionally, the effect of the two titanates and the (Fe3O4) on the permittivity and conductivity of these ternary composites is investigated. These composite materials were characterized using time domain spectroscopy (TDS). The inclusion of the two titanates increased the real permittivity and conductivity of the two composites, shifting the resonance frequency (ƒR) towards the low frequency range and causing the opposite phenomenon for the static permittivity (εs). The frequency dispersion behavior model for the complex permittivity has been proposed to improve the effectiveness of the predictive frequency model through a better choice of the damping factor and to bring theoretical and experimental findings closer together. Comparing these data shows that the proposed model is applicable to ternary combinations with high accuracy. The values of the quality factor (Q) obtained are encouraging in microwave applications. These composite materials witch containing CaTiO3 and SrTiO3 inclusions have contributed to the development of dielectric permittivity that suits very well frequency communication systems.
21 December 2021 in Inorganic and Nano-Metal Chemistry
The aim of this paper is to study and to model the dielectric behavior of two ternary composites prepared from a mixture of barium titanate (BaTiO3) and one of the two materials (iron oxide (Fe304) or ferrite) in epoxy resin matrix which the volume fraction is fixed at 70%. The time domain spectroscopy (TDS) method is used to characterize the samples under test in the range from direct current (DC) to 12.5 GHz. The conductivity behavior study is performed at a low frequency of 250 MHz, throughout this work. The study has therefore been focused on the effect of adding iron oxide and ferrite to titanate included in an epoxy matrix. In this work, we present a new approach to model the permittivity behavior of a ternary composite by the introduction of the shape factor for different mixture laws in order to best fit the model to experimental data. Subsequently, a comparison is made with these modified laws to determine the most suitable one. To predict the dielectric permittivities of the ternary composites and their shape factor coefficients in a quantitative manner, we use a numerical optimization method for identification the parameters of the theoretical model. These composite materials find their interest in the miniaturization of electronic components used in microelectronic circuits and in the telecommunication applications.