This article analyzes the evolution and current trends in aerial robotic manipulation, comprising helicopters, conventional underactuated multirotors, and multidirectional thrust platforms equipped with a wide variety of robotic manipulators capable of physically interacting with the environment. It also covers cooperative aerial manipulation and interconnected actuated multibody designs. The review is completed with developments in teleoperation, perception, and planning. Finally, a new generation of aerial robotic manipulators is presented with our vision of the future.
29 January 2019 in IEEE Robotics and Automation Letters
We present the design, motion planning, and control of an aerial manipulator for non-trivial physical interaction tasks, such as pushing while sliding on curved surfaces-a task which is motivated by the increasing interest in autonomous non-destructive tests for industrial plants. The proposed aerial manipulator consists of a multidirectional-thrust aerial vehicle-to enhance physical interaction capabilities-endowed with a 2-DoFs lightweight arm-to enlarge its workspace. This combination makes it a trulyredundant manipulator going beyond standard aerial manipulators based on collinear multirotor platforms. The controller is based on a PID method with a “displaced” positional part that ensures asymptotic stability despite the arm elasticity. A kinodynamic task-constrained and control-aware global motion planner is used. Experiments show that the proposed aerial manipulator system, equipped with an Eddy current probe, is able to scan a metallic pipe sliding the sensor over its surface and preserving the contact. From the measures, a weld on the pipe is successfully detected and mapped.
22 July 2021 in The International Journal of Robotics Research
This paper reviews the effect of multirotor aerial vehicle designs on their abilities in terms of tasks and system properties. We propose a general taxonomy to characterize and describe multirotor aerial vehicles and their designs, which we apply exhaustively on the vast literature available. Thanks to the systematic characterization of the designs, we exhibit groups of designs having the same abilities in terms of achievable tasks and system properties. In particular, we organize the literature review based on the number of atomic actuation units and we discuss global properties arising from their choice and spatial distribution in the mechanical designs. Finally, we provide a discussion on the common traits of the designs found in the literature and the main open and future problems.
8 February 2018 in IEEE Robotics and Automation Letters
This paper considers the study of cooperative manipulation of a cable-suspended load with two generic aerial robots and without explicit communication. The role of the internal force for the asymptotic stability of the beam-position/beam-attitude equilibria is analyzed in depth. Using a nonlinear Lyapunov-based approach, we prove that if a non-zero internal force is chosen then asymptotic stabilization of any desired beam-pose configuration can be achieved with a decentralized and communication-less master-slave admittance controller. If, conversely, a zero internal force is chosen, as done in the majority of the state-of-the-art algorithms, the attitude of the beam is not controllable without communication. Non-zero internal force can be interpreted then as a fundamental factor that enables the use of cables as implicit communication means between the two vehicles in replacement of the explicit ones. Furthermore, the formal proof of the system output-strictly passivity with respect to an energy-like storage function and a certain input-output pair is given. This proves the stability and the robustness of the method even during motion. The theoretical findings are validated through numerical simulations.
28 January 2020 in IEEE Robotics and Automation Letters
In this work we propose an uncertainty-aware controller for the Fly-Crane system, a statically rigid cable-suspended aerial manipulator using the minimum number of aerial robots and cables. The force closure property of the Fly-Crane makes it ideal for applications where high precision is required and external disturbances should be compensated. The proposed control requires the knowledge of the nominal values of a minimum number of uncertain kinematic parameters, thus simplifying the identification process and the controller implementation. We propose an optimization-based tuning method of the control gains that ensures stability despite parameter uncertainty and maximizes the $H_\infty$ performance. The validity of the proposed framework is shown through real experiments.
4 August 2021 in IEEE Robotics and Automation Letters
To address the challenge of precise, dynamic and versatile aerial manipulation, we present an aerial manipulation platform consisting of a parallel 3-DOF manipulator mounted to an omnidirectional tilt-rotor aerial vehicle. The general modeling of a parallel manipulator on an omnidirectional floating base is presented, which motivates the optimization and detailed design of the aerial manipulator parameters and components. Inverse kinematic control of the manipulator is coupled to the omnidirectional base pose controller with a dynamic compensation term, going beyond common decoupled approaches. This presents a baseline for the control of redundant omnidirectional aerial manipulators. Experimental flights show the advantages of an active manipulator vs. a fixed arm for disturbance rejection and end effector tracking performance, as well as the practical limitations of the dynamic compensation term for fast end effector trajectories. The results motivate future studies for precise and dynamic aerial manipulation.