Detector grade, charge compensated Cd1-xZnxTe (CZT) crystals were treated by mechanical polishing, chemical solution etching, and radio-frequency gold sputtering. The crystals and detectors were next studied using direct current (DC) photoconductivity and low-temperature photoluminescence (PL). The DC photocurrent was analyzed with a steady state continuity equation and the results were correlated with PL and gamma-ray detector performance tests. The dependence of the electron lifetime on the light intensity of the CZT detector was consistent with a Shockley-Read one-center model. It was found that the surface recombination velocities, the effective mobility-lifetime products, and gamma-ray performances of CZT crystals are modified dramatically by the choice of chemical etchant.
CdTexSe1-x, with its several advantages over the conventional CdZnTe (CZT) material, offers potential as a roomtemperature radiation detector. Its main advantage is the near-unity segregation coefficient of Se in the CdTe matrix that results in higher compositional homogeneity of the grown ingot. In this paper, we discussed the growth of CdTeSe crystals by various techniques, such as the Traveling Heater method and the Vertical Bridgman technique. We analyzed the different defects in the grown ingots, including Te inclusions/precipitations, sub-grain boundaries and dislocation networks, and studied their effects on the materials’ charge-transport characteristics. Our experimental findings demonstrated several advantages of CdTeSe over CZT, in addition to the near-unity segregation coefficient of Se, including lower concentrations of Te-inclusions/precipitations and sub-grain boundaries and a higher degree of uniformity. Our findings on its charge-transport characteristics also are very encouraging.
CdZnTe, commonly known as CZT is the material of paramount importance for hard X-ray and gamma ray spectroscopy and imaging applications at room temperature. Over the years, the quality of CZT crystals and its charge transport properties has improved significantly making it an attractive detector material especially for homeland security applications. The applications for homeland security demand large and thick detectors to provide a sufficient stopping power for fast detection of high energy gamma photons. In this present report we have grown two inch diameter CZT by Traveling heater method (THM) technique. The as-grown crystals were characterized through photoluminescence (PL) mapping for composition uniformity, growth interface study, Te precipitations/inclusions studies. In order to evaluate our as-grown samples, charge transport characteristics have been studied for thick samples up to ~16mm thick. It has been demonstrated that by controlling the growth interface, visualization of large and thick (~16mm thick) detectors with fairly good response is possible from as-grown CZT detectors grown by THM technique.