We report the reduction of surface reflection losses in zinc germanium phosphide or ZGP) crystals by fabricating an antireflection (AR) structure in the substrate itself using subwavelength motheye surface patterns. The motheye AR patterning works by creating a region of gradually varying effective refractive index between air and the ternary nonlinear crystal. Motheye structures were created using interference lithography and reactive-ion etching in a plasma. The ZGP crystal with motheye patterning on the output surface reached a transmittance of ∼67% at a cutoff wavelength of 3.8 μm (close to the theoretical maximum of 73%), with negligible surface contamination from the motheye etching process. The motheye patterning technique could be applied to other nonlinear crystals where surface reflection losses are a concern.
A broad optical absorption band with a peak near 1 μm is present in most single crystals of These same crystals have an electron paramagnetic resonance (EPR) signal which has been assigned to singly ionized zinc vacancies. A direct correlation between the intensity of the optical absorption at 1 μm and the intensity of the EPR signal has been established using a set of crystals where this absorption varied widely. These results suggest that the singly ionized zinc vacancy acceptor plays a direct role in the electronic transition(s) responsible for the 1 μm optical absorption. In separate experiments, it was found that illuminating the crystals with a He–Ne laser (632.8 nm) while at temperatures near 25 K produces an increase in the absorption at 1 μm and an increase in the zinc vacancy EPR spectrum. These latter results provide further evidence that the absorption at 1 μm is associated with the singly ionized zinc vacancy acceptor.
The fundamental optical properties of a nonlinear optical semiconductor are reported. These properties include birefringence, indices of refraction, infrared transmission, and the temperature dependence of the band gap. The average index for wavelengths greater than several microns was found to be 3.0. The birefringence was found to be rather large and to range from a near band edge value of 0.038 at 1.3 μm to a value of 0.017 at 15 μm. Additionally, native defect related sub-bandgap absorption, photoluminescence, and electrical transport have been studied in these nominally undoped p-type crystals. An activation energy associated with these defects was determined to be 0.3 eV and the corresponding photoluminescence and absorption data showed, respectively, a broad asymmetric emission band centered at 0.8 eV and two bands at 0.95 and 1.01 eV, the absorption band at 0.95 eV being the most intense. The measured properties were utilized to assess the potential of for the wavelength conversion processes of second-harmonic generation and degenerate optical parametric oscillation. It was found that will not phase match at room temperature. However, it is estimated that mixed crystals of the form for a Te addition of 19% can exceed the conversion efficiency of by more than 100%.
We propose new transition metal (TM)-doped composite materials for mid-IR fiber lasers. The composites are the suspension of crystalline micro- and nanosized or powders in chalcogenide glasses with the refraction index matching. Mid-IR room-temperature lasing of microcomposite material is demonstrated at the wavelength.