More people prefer to using rail traffic for travel or for commuting due to its convenience and flexibility. As the record of the maximum speed of rail has been continuously broken and new applications are foreseen, the high-speed railway (HSR) communication system requires higher data rate with seamless connectivity, and therefore, the system design faces new challenges to support high mobility. Millimeter-wave (mmWave) technologies are considered as candidates to provide wideband communication. However, mmWave is rarely explored in HSR scenarios. In this paper, channel characteristics are studied in the 5G mmWave band for typical HSR scenarios, including urban, rural, and tunnel, with straight and curved route shapes. Based on the wideband measurements conducted in the tunnel scenario by using the ''mobile hotspot network'' system, a 3-D ray tracer (RT) is calibrated and validated to explore more channel characteristics in different HSR scenarios. Through extensive RT simulations with 500-MHz bandwidth centered at 25.25 GHz, the power contributions of the multipath components are studied, and the dominant reflection orders are determined for each scenario. Path loss is analyzed, and the breakpoint is observed. Other key parameters, such as Doppler shifts, coherence time, polarization ratios, and so on, are studied. Suggestions on symbol rate, sub-frame bandwidth, and polarization configuration are provided to guide the 5G mmWave communication system design in typical HSR scenarios.
18 January 2018 in IEEE Transactions on Vehicular Technology
This paper presents a geometry-based stochastic channel model for a 3GPP millimeter-wave (mmWave) high-speed train (HST) scenario. An important demand of the mmWave HST channel model is the spatial consistency during movement. In order to meet this requirement, the environment pattern containing the most effective geometry information is proposed, which is useful for generating integral and accurate channel geometry. Since the measurement of a mmWave channel is deficient for high mobility, the proposed channel model is developed using a ray-tracing (RT) simulator that is validated with the channel measurements performed in the HST scenario at 93.2 GHz. The paper gives a full parameterization for the proposed model and its implementation for channel simulation. The verification is made through a comparison of the proposed model and the measurement-validated RT simulations in terms of the power delay profile (PDP), the Ricean K-factor and the second-order statistics in the delay and angle domains. Finally, for the design of mmWave HST communication systems the time-varying channel characteristics are evaluated in the delay and Doppler domains.
24 May 2018 in IEEE Transactions on Vehicular Technology
Millimeter wave (mmWave) is a key to realize high data-rate communication and enable smart railway services. There are more and more research works focusing on the algorithm and system design for railway communications in the mmWave band. A correct understanding of the mmWave channel characteristics for railway scenario is important to the estimation and evaluation of designed technologies. In this paper, the influence of typical objects in rural railway environment to the mmWave propagation channel is analyzed. Based on the channel measurement conducted at 28 GHz with train-to-infrastructure deployment in the rural railway environment, a ray tracing (RT) simulator is calibrated in terms of environment modeling and electromagnetic (EM) calculation. The dominant multi-path components of the measurement are tracked and matched with corresponding objects in the propagation environment. Accordingly, dominant propagation mechanisms (direct, penetration, reflection, scattering, etc.) are determined, the 3D environment model and the EM parameters of different objects are calibrated. To overcome the constraints of the measurement and analyze the influence more practically, the measurement campaign is extended to four different environment cases and four T2I deployments. With the predetermined dominant propagation mechanisms and calibrated EM parameters, reliable RT simulations are conducted. The influence of typical objects are analyzed for the considered environment cases and deployments. The analysis of this work not only helps to understand the important influential factors of propagation channel at the object level, but also can be useful in guiding deployment of mmWave communication system. The provided EM parameters and environment modeling suggestions will enable reliable RT based channel realization in rural railway environments.