28 December 2023 in Military Technical Collection
Shape memory alloys (SMAs) are used in various fields, including military equipment, to create means with autonomous or improved properties. It can be especially useful in structural elements that are capable of self-healing after deformations or damage as a result of explosions, impacts or other loads that occur during military operations. SMAs are materials that have the ability to remember and restore the accumulated deformation under certain conditions. This makes them particularly useful in robotics, where they can be used to create moving parts, sensors, actuators and other components. One of the main applications of SMA in robotics is the creation of moving elements. For example, they can be used to create bendable segments in jobs that require flexibility and mobility. SMAs can be used to create manipulators that allow a robot to easily move and perform tasks in different environments. One of the most important properties of SMAs is their ability to retain their shape during deformation. This makes them useful for building sensors that can detect differences in the shape of an object. SMAs can be used to create pressure sensors that respond to a change in shape under the influence of external pressure. These sensors can be used to develop robots that can recognize objects and distinguish them by shape. SMA can also be used to create actuators. Actuators are components that convert electrical, mechanical, or other types of energy into motion. SMA are materials that have the ability to remember and restore the accumulated deformation under certain conditions. This is achieved due to the peculiarities of their microstructure and thermoelastic effect. When SMA is subjected to thermal influence in the temperature zone where it can transition between two states: austenitic (higher temperature) and martensitic (lower temperature), under an existing external load, the phase strain increases, and with the degree of load, the temperature of the beginning and end of the emerging of straine changes. Each of these states has its own crystal structure and characteristics determined by its chemical composition. The article considers the issue of taking into account the shift of characteristic temperatures under the influence of an external load of SMA in terms of the synthetic theory of irreversible deformation and proposes a non-linear formula for finding the characteristic temperatures of metals with memory during loading. The obtained ratio was used to find the proportion of the new phase and the rate of formation of the new phase as a function of the magnitude of the external load, the rate of loading, the absolute temperature, the rate of temperature change and the characteristic temperatures in terms of the effective temperature.
27 May 2026 in PRZEGLĄD ELEKTROTECHNICZNY
The article presents an improved method for monitoring the viscosity of motor oil by its electrical parameters. This dependence is based on laboratory studies of the spectra of the dependences of the values of the complex conductivity of the measuring system on the frequency of the test signal. The method is based on a new calibration dependence of viscosity on the measured value of complex conductivity. The obtained dependences allow their use in cyber-physical systems for oil quality control.
1 January 2025 in The collection of scientific works of the National Academy of the National Guard of Ukraine
This study presents the development and experimental validation of an advanced methodology for electromagnetic spectroscopy applied to DOT 4 brake fluid, aiming to characterize the temperature-dependent behavior of complex admittance across a broad frequency range—spanning 50 kHz to 300 MHz. Measurements were conducted over a temperature interval from –5 °C to +55 °C, capturing the thermally induced evolution of the fluid’s electrical properties under near-operational conditions. To interpret the data, the admittance spectra were modeled using a damped harmonic oscillator framework, enabling decomposition of the system’s response into three physically meaningful parameters: effective inertia (m), dissipation (β), and elastic stiffness (k). A comprehensive inverse fitting procedure was applied to over 6000 frequency profiles, yielding high-precision identification of the temperature-dependent resonance features. Notably, the damping parameter β exhibited exponential growth with temperature, in accordance with the Arrhenius law. This behavior allowed for the first electromagnetic estimation of the activation energy for viscous dissipation in DOT 4 fluid, determined to be approximately 21.25 kJ/mol. In contrast, the temperature dependence of effective mass and stiffness revealed nonlinear trends, suggesting potential phase transitions or microstructural rearrangements within the fluid matrix. The proposed methodology offers a pathway to non-invasive diagnostics of brake fluid quality by analyzing its electromagnetic response characteristics. This opens opportunities for the integration of autonomous sensing systems—for example, those based on vector network analyzers—capable of real-time fluid evaluation without extraction from the hydraulic circuit.