23 February 2026 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
1 April 2026 in Journal of Instrumentation
The dual-radiator RICH (dRICH) detector of the ePIC experiment will employ over 300000 SiPM pixels as photosensors, organized into more than 1000 Photon Detection Units. Each PDU is a compact module, approximately 5 × 5 × 12 cm 3 in size, including four custom ASICs connected to 256 SiPMs and an FPGA-based readout card (RDO) responsible for data acquisition and control. Considering the moderately harsh radiation environment expected in the dRICH detector, this study reports on proton irradiation tests performed on key components of the RDO card to assess their tolerance to cumulative Total Ionizing Dose (TID) and Single Event Effects (SEE). All tested components demonstrated radiation tolerance beyond the TID levels expected for the dRICH environment, with the exception of the ATtiny817 microcontroller, which showed destructive failure. Furthermore, as expected, the observed Single Event Upset (SEU) rates call for appropriate mitigation strategies in the final system design.
14 June 2026 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
1 January 2026 in Journal of Instrumentation
The dual-radiator (dRICH) detector of the ePIC experiment at the future Electron-Ion Collider (EIC) will make use of SiPM sensors for the detection of the emitted Cherenkov light. The photo-detector will cover ∼3 m 2 with 3×3 mm 2 pixels, for a total of more than 300000 readout channels, and will be the first application of SiPMs for single-photon detection in a collider experiment. SiPMs are chosen for their low cost and high photon detection efficiency, which remains unaffected even in the presence of a high magnetic field. However, since they are not radiation-hard, careful attention is required to preserve their single-photon counting capabilities and to keep the dark count rate (DCR) under control throughout the years of operation of the ePIC experiment. DCR control can be achieved by operating SiPMs at low temperatures and by recovering radiation damage through high-temperature annealing cycles. We present an overview of the ePIC-dRICH photo-detector system. Special focus is given to development and beam test results of a large-area prototype SiPM readout plane consisting of a total of up to 2048 3×3 mm 2 sensors. The photo-detector prototype is modular and based on a novel EIC-driven photo-detection unit (PDU) developed by INFN, which integrates 256 SiPM pixel sensors, cooling and TDC electronics in a volume of ∼5×5×14 cm 3 . The prototype has been successfully tested with particle beams at CERN-PS in October 2023 and in May 2024. Results on ring images reconstructed, beam momentum scan and particle identification using the dual radiator configuration are presented. In addition, studies on radiation-induced defects using emission microscopy, and on annealing cycles used to recover radiation damage, are shown.
1 September 2026 in Journal of Instrumentation
The dual-radiator RICH (dRICH) detector will use silicon photomultipliers (SiPMs) to detect Cherenkov radiation with single-photon sensitivity over an area of ∼3 m 2 . It will be one of the main components for particle identification in the ePIC experiment at the EIC. With ∼320k detector channels, data will be read out through 4,992 Front End Boards (FEBs). Each of the 1,248 Readout Boards (RDOs) will aggregate data from four FEBs, and transmit it via a VTRx+ optical link to a 48-port Data Aggregation and Manipulation (DAM) board. Each module composed by one RDO and four FEBs is called Photo Detection Unit (PDU). The DAM boards will be implemented using the FPGA-based FELIX-155 cards developed for the Phase-II upgrade of the ATLAS experiment. Each board will merge and collect data from 42 RDOs, forwarding it to the ePIC data buffering system (Echelon 0) through a 100 GbE channel. The dRICH is partitioned into six sectors, and the readout of channels from each sector is performed by five DAMs, for a total of 30 boards for the whole detector. The SiPM Dark Count Rate (DCR) is expected to increase with the integrated luminosity during the experiment's lifetime, potentially leading to an excessive bandwidth demand on the DAQ system. To mitigate this risk, we designed a real-time data reduction system that will lower the detector output bandwidth by roughly an order of magnitude. This solution involves the implementation of a distributed data-flow processing architecture on the DAMs and on an additional FELIX-155 card that will act as a Trigger Processor (TP), which will selectively filter out events exclusively caused by DCR noise. The current design features a distributed Multi-Layer Perceptron (MLP) Neural Network trained for noise-only event discrimination. The model is composed of 30 separate MLP sub-network replicas, deployed one per DAM: each replica processes the local event information — coming from 42 adjacent PDUs — to extract a set of features that are passed to the TP using a direct low-latency communication channel. The TP firmware is composed of six sector-MLP sub-networks that, taking as input the merged features extracted by each of the five DAMs of a single sector, implement a further feature-extraction step for each sector. These produce the input for a final, single MLP layer that performs the classification task and generates the corresponding trigger signal to accept or discard the event depending on whether a physics (including background) signal is present alongside the DCR noise, or if only DCR noise is detected. The data reduction process will be synchronized with the main EIC clock running at 100 MHz, corresponding to ∼10 ns between electron-ion bunch crossings, presenting a significant challenge for its implementation in the dRICH DAQ system. We will outline our approach to addressing this issue and the overall system design, starting from dataset generation for the training and validation of the distributed NN model, covering FPGA computing pipelines and communication, up to the current status of the implementation and testbed results.
5 November 2026 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment