26 September 2023 in IEEE Access
This paper presents an application of new developed meta-heuristic Geometric Mean Optimization (GMO) algorithm, which mimics geometric mean operator unique features in mathematics with combination of power loss sensitivity index (PLSI) for the problem of optimal network reconfiguration (NR), optimal distributed generation (DG) unit allocation with optimal power factor (OPF) and unity power factor (UPF), simultaneous optimal NR and allocation of DG units with considering UPF and OPF, taking into account operational constraints and three loading levels (0.5 p.u loading (light load level), 1.0 p.u loading (nominal load level) 1.6 p.u loading (heavy load level) to solve single and multi-objective functions such as maximize voltage stability index (VSI), minimize total active power loss (TAPL) and voltage deviation (VD) in distribution network (DN). The effectiveness of the proposed technique has been evaluated on IEEE 33 bus and 69-bus networks. As a result of simultaneous optimal NR and DG unit allocation with OPF, substantial improvements have been observed in terms of VSI and minimization of TAPL and VD, as compared to optimal simultaneous NR and DG unit allocation with UPF, only DG unit allocation with UPF and OPF, and only NR and base case. When multiple objectives are considered, simultaneous allocation of NR and DG units with OPF provides better results for all types of load conditions. Using the results at nominal load level for the objective of TAPL, the proposed technique was compared with the results obtained with other existing algorithms in the literature to assess its efficacy. Based on the comparison of results, it is determined that the combined technique outperforms other techniques in the literature for the goal of TAPL at a nominal load level for all cases. This proposed technique process has a good accuracy and convergence speed which makes it a good choice for simultaneous optimal NR and DG unit allocation with UPF and OPF for problem-solving for all load conditions.
4 March 2025 in International Journal of Innovative Research and Scientific Studies
The increasing global push for environmentally conscious policies has encouraged many countries to promote the use of electric-powered machinery, leading to a significant surge in the production of electric vehicles (EVs). As more consumers opt for electric vehicles, there is a concurrent demand for greater efficiency to cater to their needs. One of the key challenges electric vehicle manufacturers face is ensuring that electric motors can deliver power swiftly and accurately to achieve desired speeds. This research paper delves into the development of a motor controller for electric vehicles, utilizing the Field Oriented Control (FOC) approach, which includes the flux controller for three-phase PMSM motors. FOC is a popular technique for motor control, known for its ability to provide precise control and practical application. The paper presents an in-depth exploration of the FOC algorithm, breaking down each component to understand how it contributes to controlling electric motors effectively. A detailed model is developed using MATLAB/Simulink, allowing the researchers to simulate various scenarios and evaluate the outcomes. By conducting this analysis, the paper aims to determine which model parameters yield the most accurate results. The study also examines different conditions and compares the accuracy of their results. Following the simulation, the model with the best accuracy parameters is selected for further testing in real-world scenarios. These tests are conducted to validate the simulation results, ensuring that the proposed motor controller design performs as expected under actual driving conditions. The paper's final section discusses the implications of these findings for electric vehicle technology and offers insights into future developments in this rapidly evolving field.