18 September 2024 in Nature Energy
The interlaboratory comparability and reproducibility of all-solid-state battery cell cycling performance are poorly understood due to the lack of standardized set-ups and assembly parameters. This study quantifies the extent of this variability by providing commercially sourced battery materials—LiNi0.6Mn0.2Co0.2O2 for the positive electrode, Li6PS5Cl as the solid electrolyte and indium for the negative electrode—to 21 research groups. Each group was asked to use their own cell assembly protocol but follow a specific electrochemical protocol. The results show large variability in assembly and electrochemical performance, including differences in processing pressures, pressing durations and In-to-Li ratios. Despite this, an initial open circuit voltage of 2.5 and 2.7 V vs Li+/Li is a good predictor of successful cycling for cells using these electroactive materials. We suggest a set of parameters for reporting all-solid-state battery cycling results and advocate for reporting data in triplicate.
10 January 2025 in Advanced Energy Materials
All‐solid‐state batteries (SSB) show great promise for the advancement of high‐energy batteries. To maximize the energy density, a key research interest lies in the development of ultrathin and highly conductive solid electrolyte (SE) layers. In this work, thin and flexible sulfide solid electrolyte membranes are fabricated and laminated onto a non‐woven fabric using a scalable and solvent‐free, continuous roll‐to‐roll process (DRYtraec). These membranes show significantly improved tensile strength compared to unsupported sheets, which facilitates cell assembly and allows a continuous component production using a single‐step calendering process. By tuning the thickness, densified membranes with thicknesses ranging from 40 to 160 µm are obtained after a compression step. The resulting SE membranes retain a high ionic conductivity (1.6 mS cm−1) at room temperature. An excellent rate capability is demonstrated in a SSB pouch cell with a Li2O–ZrO2‐coated LiNi0.9C0.05Mn0.05O2 cathode, a 55 µm thin SE membrane, and a columnar silicon anode fabricated by a scalable physical vapor deposition process. At stack level, a promising energy density of 673 Wh L−1 (and specific energy of 247 Wh kg−1) is achieved, showcasing the potential for high energy densities by reducing the SE membrane thickness while retaining good mechanical properties.
3 February 2023 in Advanced Sustainable Systems
All‐solid‐state lithium–sulfur batteries (ASSB‐LiS batteries) are considered among advanced candidates for next‐generation energy storage systems, as they break with restrictions and limitations that liquid electrolytes impose on lithium‐ion batteries and lithium‐sulfur batteries (LiS‐batteries), meaning enhanced safety and higher energy densities. However, investigations under realistic conditions on pouch cell level are challenging, as it is necessary to implement a scalable preparation method for sheet‐type cathodes with high sulfur utilization and loading. In this study, a solvent‐free process to prepare free‐standing cathode sheets with low binder content down to 0.1 wt% PTFE is demonstrated. The contribution of binder and electrolyte on the conversion reaction of sulfur is discussed. Sheet‐type cathodes reach nearly theoretical sulfur utilization of 1672 mAh gS−1 and outstanding reversible capacity retention with 72% of initial discharge capacity after 400 cycles by adapting cut‐off voltages to the stability window of the electrolyte. Furthermore, an all‐solid‐state pouch cell is demonstrated using the dry‐film cathode, which is successfully tested for 50 cycles at different C‐rates. Thickness monitoring of the cell stack gives fundamental insights into the volume change and breathing behavior of both cathode and anode.
5 August 2024 in Advanced Energy Materials
Lithium–sulfur batteries with liquid electrolytes are discussed as the most promising post‐lithium‐ion‐battery technology in literature due to their high theoretical specific energy and first prototype cells delivering >470 Wh kg−1. Although several electrolyte and material concepts are developed that partially solve the issue of the so‐called shuttle mechanism, the most promising concept to genuinely confine sulfur species in the cathode is all‐solid‐state argyrodite–sulfur cathodes leading to almost theoretical active material utilization by maintaining reasonable sulfur loadings and electrolyte to sulfur ratios. However, this battery concept has so far not achieved reversible cycling against metallic lithium anodes as it requires high pressures for manufacturing, and ductile lithium metal creeps along the grain boundaries of the solid electrolyte particles leading to short cuts of the cells. Recent findings show that metallic lithium, however, can be stably cycled with dimethoxyethane/lithium‐bis(fluorosulfonyl)imide (DME/LiFSI)‐based electrolytes. Herein, for the first time, a semisolid concept is presented combining the benefits of an argyrodite‐based solid‐state cathode and a DME/LiFSI/hydrofluoroether‐based anolyte concept – in coin cells and first pouch cells. This disruptive approach enables projected specific energies higher than 600 Wh kg−1 at cell stack level.
8 October 2025 in Advanced Functional Materials
The solvent‐free processing of cell components is attracting growing interest, as it avoids energy‐intensive drying and solvent recovery procedures. In solid‐state batteries, the dry processing of solid electrolyte (SE) films results in improved ionic conductivities compared to wet processing and eliminates degradation due to residual solvent traces. For dry processing, the binder polytetrafluoroethylene (PTFE) is widely used due to its excellent fibrillation, but it shows poor electrochemical stability at low anode potentials. Here, the influence of processing parameters on the binder structure is evaluated, and the electrochemical degradation of the dry film separators is systematically investigated (e.g., CTTA measurements) at different anode potentials (Si and Li anode). A combination of electrochemical and surface characterization at the SE dry film/anode interface is conducted. The results confirm that processing has a large influence on the stability at the dry film/anode interface. By adapting the SE dry film processing, long‐term cycling in Si||NMC pouch cells is demonstrated over more than 1300 cycles. Additionally, a high initial coulombic efficiency of 92% and an average CE of 99.7% are obtained over 100 cycles, highlighting the potential of dry film separators for the application with Si anodes.
22 May 2021 in Energy Technology
Brines are abundant waste products from desalination plants and have higher lithium contents than sea water (0.17 ppm). Herein, electrochemical lithium recovery from real brine solutions using Li‐selective LiMn2O4 is reported. Free‐standing electrodes are prepared completely solvent‐free. At low current densities, the complete theoretical capacity of 148 mAh g−1 can be utilized. The process is highly rate dependent due to the lithium concentration in the mm range. The high salt content of the brine depicts a challenging environment for electrodes and reactor materials. Competing earth‐alkali metals lead to scale formation blocking the electrode surface and reducing the electrode capacity for lithium uptake. The high chloride concentration enables the formation of chlorine Cl2 at potentials < 1 V versus Ag/AgCl competing with the deintercalation of lithium. A combination of commercial antiscalants was used to suppress the formation of CaCO3 at the electrode prolonging its cycle life. It is shown that a cation exchange membrane not only effectively blocks chloride ions from the electrode but also decreases the Li‐diffusion. Finally, the selectivity of the process is proven in a real brine with a low lithium content (0.7 mm), and an actual recovery experiment is conducted in a flow setup.