Surface states on (001) oriented halide vapor phase epitaxy (HVPE) grown β-Ga2O3 epilayers were explored through the determination of the Schottky barrier height (SBH) as a function of the metal work function using Cr, Cu, Ni, and Au Schottky barrier diodes. SBH is found to be nearly pinned between 1.2 and 1.35 eV in the HVPE grown epilayers. The position of the Fermi level pinning is closely matched with the energy level of the oxygen vacancy [VO(III)] state (EV + 3.57 eV) in the energy bandgap of β-Ga2O3, indicating that Fermi level pinning is due to oxygen vacancy type surface states on (001) oriented β-Ga2O3 epitaxial layers. The Fermi level is found to be relatively unpinned on the bulk β-Ga2O3 (001) substrate, suggesting the presence of lower density of oxygen vacancy states on its surface. Hence, the HVPE growth process was found to be responsible for the presence of oxygen vacancy states [VO(III)] in the epilayer. Moreover, this work highlights the role of these surface states in determining the SBH on β-Ga2O3 (001) epilayers and also explains the reason behind the scattered data of SBH values reported in the literature. In addition to these results, we also showed an increment in the built-in potential and the reduction of reverse leakage current for the epilayer with lower surface state density, which gives a direct evidence of the effect of surface states on the properties of β-Ga2O3 (001) Schottky barrier diodes.
For the development of GaN-based ultraviolet (UV) photodetectors, a simple epilayer structure consisting of GaN (600 nm)/AlN (200 nm) was grown on 100-mm Si substrate using ammonia-molecular beam epitaxy growth technique. The epilayers were crack-free and showed good surface and optical quality. Metal-semiconductor-metal (MSM) interdigitated Schottky-based contacts, fabricated using Ni/Au metallic layers, showed a low dark current of 0.43 nA at 15 V. The analysis of dark current as a function of applied bias revealed that the major current conduction mechanism was through thermionic emission over a Schottky barrier of 0.902 eV. Moreover, the Schottky barrier was found to reduce with the bias, which has been attributed to the image force reduction in the devices. The MSM devices exhibited a peak responsivity of 0.183 A/W at an incident wavelength of 362 nm with a UV/visible rejection ratio of 170. The peak responsivity corresponds to external quantum efficiency of ~70%. The devices also showed good linearity and almost flat responsivity with input power for the applied bias beyond 7 V.
2 January 2020 in ECS Journal of Solid State Science and Technology
Electrical characteristics of vertical Schottky barrier diodes (SBDs) fabricated on as-grown and oxygen annealed β -Ga 2 O 3 (001) epilayers were investigated. SBDs on as-grown epilayer showed anomalous reverse leakage characteristics. Annealing of β -Ga 2 O 3 epilayers in an oxygen-containing environment up to 40 min immensely reduced the reverse leakage current. The specific on-resistance (R on ) of the SBD remained very close to that of the as-grown sample for annealing up to 20 min and increased almost by 25 times for annealing up to 40 min. Simulations of reverse tunneling characteristics, assuming oxygen vacancy type surface states, explained both the magnitude and the shape of anomalous reverse leakage. The diffusion of oxygen during annealing passivated the oxygen vacancy type surface states at first (for 20 min annealing)-resulting in two orders of reduction in leakage with minimal change in R on . Further annealing (up to 40 min) subsequently reduced the epilayer net carrier concentration from 3.3 × 10 16 to 2.9 × 10 15 cm −3 -resulting in immense change in both reverse leakage and R on . Thus, oxygen annealing proved to be a vital technique for the passivation of surface states and to reduce the net carrier concentration, which allows the modulation of reverse leakage of β -Ga 2 O 3 SBDs.
Unintentionally doped (UID) AlGaN/GaN-based multichannel high electron mobility transistor (MC-HEMT) heterostructures have been demonstrated on the SiC substrate using plasma-assisted molecular beam epitaxy. The MC-HEMT heterostructure with a GaN channel thickness of 100 nm resulted in a cumulative two-dimensional electron gas (2DEG) concentration of 4.3 × 1013 cm−2 across six GaN channels. The sample showed sheet resistances of 170 Ω/sq. and 101 Ω/sq. at room temperature and 90 K, respectively. The source of 2DEG in the buried GaN channels of the heterostructure was investigated. The C–V measurements conducted on UID MC-HEMTs excluded the possibility of the valence band being the source of 2DEG and the consequent formation of two-dimensional hole gas at the buried GaN-channel/AlGaN-barrier interfaces. A comparison of the experimentally obtained 2DEG concentration with the simulated data suggests the presence of donor-like trap states, situated at 0.6 to 0.8 eV above the valence band at the buried GaN-channel/AlGaN-barrier interfaces, which act as the source of 2DEG in UID MC-HEMT heterostructures.
We demonstrate, for the first time, crack-free AlGaN/GaN high-electron-mobility transistors (HEMT) on 100 mm Si(111) by ammonia molecular beam epitaxy. High growth rate accelerates rapid transition from three-dimensional (3D) to two-dimensional (2D) growth and reduces the defect density. With increasing GaN buffer thickness, FWHM of GaN(002) XRD peak and dislocation density decrease. Highest electron mobilities of 1350 and 4290 cm2/Vs were measured at RT and 90 K, respectively. Submicron gate devices exhibited good pinch-off characteristics with a maximum drain current (IDmax) of 768 mA/mm at Vg= +1 V and a maximum extrinsic transconductance (gmmax) of 190 mS/mm at VD= 6 V.