A new composite matrix was developed for a cutting tool based on tungsten carbide ligated with cobalt (WC-Co) using sintering technique. The admixtures of niobium carbide, tantalum carbide, and titanium carbide with the WC-Co matrix aim to inhibit the grain growth of WC and to promote covalent bonding at the interface. The modified WC-Co tools were coated with titanium nitride and titanium carbonitride layers by CAE-PVD technique. To substantiate the performances of the new coating-substrate systems, we have performed X-ray diffraction, atomic force microscopy, and scratch test measurements to estimate: phase content, average crystallite size, average texture coefficient, residual stress level, coating thickness, average roughness, square mean root, fractal dimension, cohesive adhesion, and adhesive adhesion. The results enable the in-depth understanding of the coating growth mechanisms and provide an objective evaluation of the coatings adhesion to the new cutting tools matrix. The results provide evidence to support the potential of TiN and TiCN coatings to enhance the working performances of the composite WC-Co cutting tools and to differentiate their properties. TiCN coating is shown to be superior to TiN coating in terms of adhesion and thus represents a better alternative for coating the modified WC-Co composite matrix.
Silicon carbide is one of the most promising materials for power electronic devices capable of operating at extreme conditions. The widespread application of silicon carbide power devices is however limited by the presence of structural defects in silicon carbide epilayers. Our experiment demonstrates that optical second harmonic generation imaging represents a viable solution for characterizing structural defects such as stacking faults, dislocations and double positioning boundaries in cubic silicon carbide layers. X-ray diffraction and optical second harmonic rotational anisotropy were used to confirm the growth of the cubic polytype, atomic force microscopy was used to support the identification of silicon carbide defects based on their distinct shape, while second harmonic generation microscopy revealed the detailed structure of the defects. Our results show that this fast and noninvasive investigation method can identify defects which appear during the crystal growth and can be used to certify areas within the silicon carbide epilayer that have optimal quality.
3 April 2017 in Journal of Adhesion Science and Technology
A new micro-composite refractory enamel (MCRE) was designed to play a multifunctional protective role (thermal barrier coating, corrosive and erosive protection) for the hot working parts made of EI868 superalloy sheets i.e. burning chambers, fire tubes, volets, eclises, etc. The effect of the isothermal heating at elevates temperature (800 °C, 900 °C) were, for the first time, investigate for MCRE/EI868 couple. The adhesion strength has shown an enhancement of about 100% when the couple was heated at 800 °C or at 900 °C for 10 h compared with the unexposed one. SEM-EDS, OM, XRD, EDP-XRFS and SDAR-OES investigations support a chemical bonding mechanism between MCRE and EI868 substrate via a transient interface layer. Elemental EDS distributions show that the Cr selective oxidation is responsible for the formation of the transient layer. The XRD measurements can be correlated with the contribution of the spinellic transformation of the SiO2, Cr2O3, NiO to the adhesion enhancement. The most important result reported herein is the adhesion strength enhancement of the MCRE coatings to the EI868 supperalloy by isothermal treatment. Accordingly, the MCRE behaves as a self-healing coating. Noteworthy, the working lifetime of the MCRE-EI868 couple can be significantly enhanced if an optimum pre-treatment is applied before it comes into service.
During the last decade an increasing number of researchers focused on materials that have at least one dimension in the nanoscale range. That one dimension has immense impact on the physical and chemical properties of the materials, which is mainly due to the large surface to volume ratio. In order to modify the ratio of surface to volume, many shapes can be produced. Each shape is more useful in certain application than in others (e.g. nanowires are more used in sensors then other shapes and nanospheres are more used in medicine).In this paper, nickel nanowires were grown by electrochemical deposition into polycarbonate track etched (PCTE) membrane. The morphology and size of Ni NWs were examined using an Environmental Scanning Electron Microscopy equipped with energy dispersive X-ray spectroscopy.