2 October 2024 in Applied Physics Reviews
There is an urgent need for infrared (IR) detection systems with high-level miniaturization and room-temperature operation capability. The rising star of two-dimensional (2D) semimetals with extraordinary optoelectronic properties can fulfill these criteria. However, the formidable challenges with regard to large-scale patterning and substrate-selective requirements limit material deposition options for device fabrication. Here, we report a convenient and straightforward eutectic-tellurization transformation method for the wafer-level synthesis of 2D type-II Weyl semimetal WTe2. The non-cryogenic WTe2/Si Schottky junction device displays an ultrawide detection range covering 10.6 μm with a high detectivity of ∼109 Jones in the mid-infrared (MIR) region and a short response time of 1.3 μs. The detection performance has surpassed most reported IR sensors. On top of that, on-chip device arrays based on Schottky junction display an outstanding MIR imaging capability without cryogenic cooling, and 2D WTe2 Weyl semimetal can serve as a saturable absorber for stable Q-switched and mode-locked laser operation applications. Our work offers a viable route for wafer-scale vdW preparation of 2D semimetals, showcasing their intriguing potential in on-chip integrated MIR detection systems and ultrafast laser photonics.
10 November 2021 in Advanced Science
At the macroscopic scale, the friction force (f) is found to increase with the normal load (N), according to the classic law of Da Vinci–Amontons, namely, f = µN, with a positive definite friction coefficient (μ). Here, first‐principles calculations are employed to predict that, the static force f, measured by the corrugation in the sliding potential energy barrier, is lowered upon increasing the normal load applied on one layer of the recently discovered ferroelectric In2Se3 over another commensurate layer of In2Se3. That is, a negative differential friction coefficient μ can be realized, which thus simultaneously breaking the classic Da Vinci–Amontons law. Such a striking and counterintuitive observation can be rationalized by the delicate interplay of the interfacial van der Waals repulsive interactions and the electrostatic energy reduction due to the enhancement of the intralayer SeIn ionic bonding via charge redistribution under load. The present findings are expected to play an instrumental role in design of high‐performance solid lubricants and mechanical‐electronic nanodevices.
7 July 2022 in The Journal of Physical Chemistry Letters
20 February 2024 in Proceedings of the National Academy of Sciences
Achieving high-performance materials with superior mechanical properties and electrical conductivity, especially in large-sized bulk forms, has always been the goal. However, it remains a grand challenge due to the inherent trade-off between these properties. Herein, by employing nanodiamonds as precursors, centimeter-sized diamond/graphene composites were synthesized under moderate pressure and temperature conditions (12 GPa and 1,300 to 1,500 °C), and the composites consisted of ultrafine diamond grains and few-layer graphene domains interconnected through covalently bonded interfaces. The composites exhibit a remarkable electrical conductivity of 2.0 × 10 4 S m −1 at room temperature, a Vickers hardness of up to ~55.8 GPa, and a toughness of 10.8 to 19.8 MPa m 1/2 . Theoretical calculations indicate that the transformation energy barrier for the graphitization of diamond surface is lower than that for diamond growth directly from conventional
sp
2
carbon materials, allowing the synthesis of such diamond composites under mild conditions. The above results pave the way for realizing large-sized diamond-based materials with ultrahigh electrical conductivity and superior mechanical properties simultaneously under moderate synthesis conditions, which will facilitate their large-scale applications in a variety of fields.