AA6061-SiC composites are the most preferred materials for applications in the automobile and aerospace sector due to their superior properties. The FSW process is one of the novel solid states joining processes that overcome almost all the difficulties of the fusion welding process because the process that operates well below the melting point of the metals to be joined, consumes less energy, environment-friendly, and versatile, no shielding gas or filler metal is used. The welding parameters such as tool rotational speed, axial force, and tool pin profile play a major role in deciding the joint strength and hardness of the weld zone. Taguchi method was employed in this study to scrutinize the impact of welding processing factors, including rotational, speed, axial load, and pin profile on ultimate tensile strength, microhardness of weld zone. The results reveal that the welded joints produced at 750 rpm of tool rotational speed, the axial load of 6 kN using a square pin tool profile that exhibits higher UTS. The Vickers's hardness of AA6061-6 wt.% SiC composites was found to be superior at tool rotational speed of 900 rpm, the axial force of 6kN using cylindrical tool pin. The ANOVA Findings based on Vickers's hardness are tool profile: 53.84%, tool rotational speed: 20.16%, and axial force: 21.32%.
Aluminum Metal Matrix Composites have emerged as an advanced class of structural materials have a combination of different, superior properties compared to an unreinforced matrix, which can result in a number of service benefits such as increased strength, higher elastic moduli, higher service temperature, low CTE, improved wear resistance, high toughness, etc. The excellent mechanical properties of these materials together with weight saving makes them very attractive for a variety of engineering applications in aerospace, automotive, electronic industries, etc. Hence, these materials provide as alternative substitutes for conventional engineering materials when specific mechanical properties necessary for required applications. In this work an attempt is made to study the machining parameters of Al6061/TiC MMC. The composite is developed by reinforcing TiC particles in varying proportions of 3, 6, 9 and 12 % weight fractions to the Al6061 matric alloy through stir casting technique. Cutting forces were measured by varying cutting speed and feed rate with constant depth of cut for different % weight fractions. The results showed that the cutting force increases with the increase of feed rate and decreases with the increase of cutting speed for all the weight fractions. Cutting parameters were optimized using Taguchi technique.