To investigate the influence of temperature on the pressure transfer mechanism and failure mechanism for magnetic fluid seal (MFS) with opposite pole teeth (OPT), a sealing device with water circulation channel was designed. Sealing mechanism and performance of the sealing device at different temperatures were experimentally investigated under gas and vacuum environments, respectively, and comparison with the experimental results at normal temperature. Theoretical pressure resistance was calculated according to the theoretical pressure resistance formula for MFS with temperature coefficient. The results show that temperature affects the trend of pressure difference variation for the MFS-OPT. As temperature decreases, self-stability of the magnetic fluid film improves, while pressure resistance and self-healing capability of the MFS-OPT become more pronounced.
Magnetic fluid and magnetorheological fluid are two of the most effective magnetic media seals, yet the sealing effectiveness of both has not been compared systematically. To investigate the differences between magnetic fluid and magnetorheological fluid seals, a comparative experimental device is proposed to study the sealing mechanism and performance of the two sealing media at different temperatures. Numerical simulation is used to study the magnetic field distribution of the comparative experimental device and calculate the theoretical pressure resistance (PR) of the two sealing media, respectively. The correctness of the theoretical PR formula of the magnetic media seals with additional temperature coefficient is verified by the comparative experimental results. The results show that the number of resumptions of the magnetorheological fluid film decreases with increasing temperature, while the magnetic fluid film consistently undergoes only one recovery. In addition, the self-healing capability and PR of magnetorheological fluid seals are better than that of magnetic fluid seals, and it is less affected by temperature and has stronger temperature adaptability.
To investigate the sealing mechanism and performance of the symmetric magnetic fluid seal (SMFS) with occlusal pole teeth (OPT), an experimental device was designed. The impact of magnetic fluid volumes and groove widths on the sealing mechanism and performance of the SMFS-OPT was investigated under different environments. Combining experimental results and numerical analyses, the applicability of the magnetic fluid sealing theoretical pressure resistance formula to SMFS-OPT is verified. The results show that low magnetic fluid volume and a large groove width prolong the differential pressure reduction process, thereby reducing the pressure resistance of the sealing device. Increasing the volume of the magnetic fluid increases the sealing device's self-healing rate but does not change the trend of the number of ruptures' impact on the pressure resistance.
To improve the self-restoring capabilities of ferromagnetic fluid (FF) seal, a symmetric FF seal has been developed. This study investigated the effects of parameters, including the number of pole teeth, sealing slot, and the frequency of ruptures in the FF film, on the seal's self-restoring performance. The study assessed the seal's capacity for self-restoring under various circumstances using both experimental and numerical analytical techniques. The results show that the optimized FF seal shows excellent pressure resistance (PR) under small clearances and is significantly higher than common FF seals. With the increase in axial pole teeth and radial pole teeth, the symmetric FF seal's PR and self-restoring ability show an enhanced trend, and at the first FF film rupture, PR is higher than 1.0 × 105 Pa, and the self-restoring rate is maintained at more than 50%, while the PR of common FF seals is only maintained at less than 0.5 × 105Pa, and the self-restoring rate is lower than 40%. Reasonable reductions in axial sealing slot and radial sealing slot can be effective in improving the PR and self-restoring of symmetric FF seal. These findings will be of significant importance for the design of symmetric FF seals with small clearance.