30 October 2020 in IEEE Transactions on Instrumentation and Measurement
Joint laser scanning thermography (JLST) is well-known for its efficiency to overcome the field of view (FOV) limitation of thermal imagers. However, JLST requires a data reconstruction to reveal the location of the defective area straightforwardly. Moreover, its detection capacity is limited by the lack of a deconvolution algorithm adaptive to the reconstructed data. In this study, a deconvolutional reconstruction method based on the Lucy-Richardson (LR) algorithm has been developed for JST, which is effective in suppressing random noise and the blur effect caused by thermal diffusion. A JLST inspection is carried out on a functional coating material with cylinder-like defects to test the performance of the proposed method. In comparison to the directly processed method on the original data, the proposed method is processed on the reconstructed data and then compared with principal component analysis (PCA), restored pseudo heat flux (RPHF), fast Fourier transform (FFT) methods, and non-negative matrix factorization (NMF). The experimental results indicated that our proposed LR method exhibited a higher signal-to-noise ratio. Besides, it can detect the cylinder-mocked debonding defects with a diameter of 1.5 mm and a depth of 2.0 mm buried under the 1.0 mm coating. In addition, the defect detection diameter-to-depth ratio reached 1.5, while the defect detection rate of the test specimens can approach 90%.