21 September 2018 in Nature Communications
Owing to the mixed electron/hole and ion transport in the aqueous environment, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)-based organic electrochemical transistor has been regarded as one of the most promising device platforms for bioelectronics. Nonetheless, there exist very few in-depth studies on how intrinsic channel material properties affect their performance and long-term stability in aqueous environments. Herein, we investigated the correlation among film microstructural crystallinity/composition, device performance, and aqueous stability in poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) films. The highly organized anisotropic ordering in crystallized conducting polymer films led to remarkable device characteristics such as large transconductance (∼20 mS), extraordinary volumetric capacitance (113 F·cm−3), and unprecedentedly high [μC*] value (∼490 F·cm−1V−1s−1). Simultaneously, minimized poly(styrenesulfonate) residues in the crystallized film substantially afforded marginal film swelling and robust operational stability even after >20-day water immersion, >2000-time repeated on-off switching, or high-temperature/pressure sterilization. We expect that the present study will contribute to the development of long-term stable implantable bioelectronics for neural recording/stimulation.
1 June 2021 in Science of The Total Environment
30 March 2015 in Advanced Functional Materials
26 July 2015 in Advanced Materials
26 November 2018 in NPG Asia Materials
Despite the great potential of polymer microfibers in human-friendly wearable electronics, most previous polymeric electronics have been limited to thin-film-based devices due to practical difficulties in fabricating microfibrillar devices, as well as defining the active channel dimensions in a reproducible manner. Herein, we report on conducting polymer microfiber-based organic electrochemical transistors (OECTs) and their application in single-strand fiber-type wearable ion concentration sensors. We developed a simple wet-spinning process to form very conductive poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) microfibers using aqueous sulfuric acid solutions and carefully examined their electrical/electrochemical properties. In conjunction with fabricating substrate-free PEDOT:PSS microfiber-based OECT devices, the proposed novel characterization method demonstrated that the current variation ratio can be a reliable method for evaluating the device performance for sensing ion concentrations, regardless of the actual channel dimensions. Finally, we developed single-strand fiber-type skin-mountable OECTs by introducing a source-gate hybrid electrode and demonstrated that the resultant microfiber sensors can perform real-time repetitive measurements of the ion concentration in human sweat.
24 February 2020 in Macromolecular Materials and Engineering
MCMariavittoria Craighero
+4
To realize thermoelectric textiles that can convert body heat to electricity, fibers with excellent mechanical and thermoelectric properties are needed. Although poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is among the most promising organic thermoelectric materials, reports that explore its use for thermoelectric fibers are all but absent. Herein, the mechanical and thermoelectric properties of wet‐spun PEDOT:PSS fibers are reported, and their use in energy‐harvesting textiles is discussed. Wet‐spinning into sulfuric acid results in water‐stable semicrystalline fibers with a Young's modulus of up to 1.9 GPa, an electrical conductivity of 830 S cm−1, and a thermoelectric power factor of 30 μV m−1 K−2. Stretching beyond the yield point as well as repeated tensile deformation and bending leave the electrical properties of these fibers almost unaffected. The mechanical robustness/durability and excellent underwater stability of semicrystalline PEDOT:PSS fibers, combined with a promising thermoelectric performance, opens up their use in practical energy‐harvesting textiles, as illustrated by an embroidered thermoelectric fabric module.