Dilek Kut

Dilek Kut

Auto-generated profile, based on publicly available information

Dilek Kut

Sivas Cumhuriyet Üniversitesi

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 August 2021 in Journal of Natural Fibers
Verified
Journal Article
Closed access
MKMehmet Kilinc
Mehmet Kilinc
EAEmriye Ay
Emriye Ay
DKDilek Kut
Dilek Kut
Bacterial cellulose is a raw material that is used in many industrial areas such as textile due to its properties and an alternative to plant cellulose whose usage is increasing day by day. In this research, dissolved bacterial cellulose was used as a coating material. After the coating process, samples were immersed in three different coagulation baths to provide regeneration of the coated material. TGA, FTIR, SEM-EDX, air permeability, tensile test, thermal comfort (alambeta), and water vapor transmission (permetest) analyses were carried out to compare the mechanical, chemical, and thermal properties between raw fabric and treated fabrics. Because of chemical analysis, it was observed that the structures are similar to each other. In terms of thermal stability, it has been determined that the samples that have been coated are more durable than the raw fabric. The tensile test revealed that there was a decrease between 15.05% and 41,62% in the strength of coated materials. According to the results of air permeability, alambeta, and permetest, a decrease in air permeability values, an increase in relative water vapor permeability, and thermal conductivity values were observed with the increase of the remaining coating material in the fabric.

17 January 2022 in The Journal of the Textile Institute
Verified
Journal Article
Closed access
GKGürsel Korkmaz
Gürsel Korkmaz
MKMehmet Kilinc
Mehmet Kilinc
SRSevim Atmaca Razak
Sevim Atmaca Razak
MOMünevver Ocak
Münevver Ocak
GKGürsel Korkmaz
Gürsel Korkmaz
YKY. Dilek Toprakkaya Kut
Y. Dilek Toprakkaya Kut
Face masks have an effect of preventing the spread of infectious diseases such as coronavirus disease 2019 (COVID-19). With these masks, it is primarily aimed to prevent the environment from being contaminated by the user. However, in the COVID-19 outbreak, many countries made it mandatory to use masks in areas with high human circulation such as marketplaces, shopping malls and hospitals, and then in all areas outside the home. Some tests such as filtration efficiency, microbial load, resistance to body fluids, flammability and breathability are performed to determine the protection potential and wearing comfort of face masks. In this study, we investigated the bacterial filtration efficiency (%), microbial load (cfu/g), breathability (Pa/cm2) and air permeability values of five different face masks obtained by combining polypropylene (PP) nonwoven layers in different weights (accordance with EN 14683:2019 + AC:2019, EN ISO 11737-1:2018 and TS 391 EN ISO 9237 Standards). The surface morphologies of the nonwoven fabrics were characterized by scanning electron microscope (SEM). It was observed that the weight change in spunbond masks (1–4) was directly proportional to bacterial filtration efficiency and differential pressure, and inversely proportional to air permeability. In addition, SEM analysis showed that the average fiber diameter of the meltblown layer was at least 5.80 times smaller than the spunbond layers, and as a result, dramatic differences were also observed in the air permeability and differential pressure values of the Spunbond-Meltblown-Spunbond (SMS) mask (5) compared to spunbond masks.

15 October 2022 in Journal of Natural Fibers
Verified
Journal Article
Closed access
SESeyda Eyupoglu
Seyda Eyupoglu
CKCengiz Karabulut
Cengiz Karabulut
SGSerdar Erdem Gül
Serdar Erdem Gül
AEAhmet Tamer Esener
Ahmet Tamer Esener
FYFırat Yılmaz
Fırat Yılmaz
DKDilek Kut
Dilek Kut
In this study, cellulose acetate-based fabrics were subjected to a resin-based wrinkle-resistant treatment. The fabric samples were treated with oxygen plasma for 1 and 5 minutes with a power of 100W prior the wrinkle-resistance finishing to enhance wrinkle resistance. The surface morphology and functional groups of samples were analyzed with scanning electron microscopy and Fourier transform infrared spectroscopy, respectively. The angle of wrinkle-resistance and tensile strength of samples were investigated in accordance with resin type and plasma treatment. Scanning electron microscope micrographs reveal that plasma treatment generates microscopic grooves and micro-cracks on the sample surfaces, resulting in an etching effect. Furthermore, the samples have been successfully treated with resin-based wrinkle-resistant finishing. The results of Fourier transform infrared spectroscopy show that no significant alterations in functional groups formed in the acetate fibers posterior to plasma treatment. The wrinkle-resistance angle of cellulose acetate cloth pre-treated with oxygen plasma and wrinkle-resistance resin was significantly improved, according to the results. The high wrinkle resistance result was obtained for warp direction 113.5 ± 3.5 and weft direction 102 ± 3. Furthermore, the wrinkle resistance data were investigated using MATLAB R2020b to predict one-way ANOVA with the main factor, plasma treatment, and the interaction impact was extremely significant (P < .05). The ANOVA results resemble that plasma treatment has an influence on sample wrinkle resistance. Furthermore, with plasma treatment, sample tensile strength increases from 525.15 N to 530.76 N, but with wrinkle-resistance resin, it decreases. Consequently, plasma pre-treatment and wrinkle-resistance resin are anticipated to suit both the needs of eco-friendly and high-quality finishing methods for textile materials.

1 December 2023 in Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Verified
Journal Article
Open access
PDF file
EDElif Demi̇rkan
Elif Demi̇rkan
DKDilek Kut
Dilek Kut
NTNilay Aladağ Tani̇k
Nilay Aladağ Tani̇k
In this study, phytase from Bacillus megaterium EBD9-1 and cellulase from Bacillus subtilis 171ES obtained from isolated from different provinces soils, and commercial pectinase enzymes were investigated for the removal potential of plant impurities from raw wool fabrics. Enzymatic removal of plant impurities is usually carried out at pH 4.0. The efficiency of the enzyme was shown at pH 7.0, but the best effect was obtained with pH 4.0. Enzymes were effective alone, but the effects of double and triple enzyme mixtures on plant impurities were more. It was determined that the effect decreased in case the enzyme amount was used low, and the effect increased even more in the presence of the concentrated enzyme. With this study, which was carried out for the first time with local isolate, the operability of more environmentally friendly enzymes in carbonization processes traditionally performed with chemical substances was demonstrated.

1 January 2026
Verified
Conference Paper
Closed access
PDF file
DKDilek Kut
Dilek Kut
EYEbru Yalçin
Ebru Yalçin
AKAzize Kahraman
Azize Kahraman
YBYunus Bay
Yunus Bay
MÇMuhammet Çakar
Muhammet Çakar
EMEmre Mutman
Emre Mutman
Scratching of household furniture by cats is a common issue reported by pet caregivers. Various studies have been conducted worldwide to reduce the frequency of scratching and mitigate its undesirable consequences. Inappropriate scratching not only causes damage to household items but may also lead to deterioration of the human-animal bond and even abandonment of cats. This study aims to reduce the damage to upholstery fabrics in home environments and to control the scratching behavior of domestic cats by integrating bioactive components into textile surfaces through microencapsulation technology. Within the scope of the study, microcapsule structures will be developed containing citrus-based essential oils that act as natural repellents, as well as cat pheromones used to direct cats toward designated scratching areas. In order to ensure both sustainability and textile compatibility, the complex coacervation technique has been employed, utilizing natural biopolymers such as β-cyclodextrin and gum Arabic as shell materials. This method is based on sensitive electrostatic interactions between oppositely charged polymers, controlled via pH adjustment, to form a protective shell around the dispersed core material. The microcapsule production protocol consists of four systematic stages: -Formation of a stable water-in-oil emulsion, -Initiation of polymer complexation, -Deposition of the coacervate phase onto the core material, and -Stabilization of the capsule wall structure using a crosslinking agent. Our evaluations indicate that pH, stirring speed, and the sequence of component addition are the most critical parameters in achieving structural homogeneity. To verify the success of the synthesis, the microcapsules were analyzed using optical microscopy in terms of morphological integrity. Particle size distribution determined by laser diffraction confirmed that target capsules with high homogeneity and sizes of 10 µm or smaller were successfully obtained. Furthermore, after application onto the fabric, the distribution of the capsules was examined by SEM, their presence within the polyester structure was confirmed by FT-IR analysis, and their release behavior was evaluated using GC-MS. These optimized formulations will be scaled up in subsequent stages of the study, and field studies will be conducted to investigate their effects on cat scratching behavior. This study is carried out under Project No. 5240101 (TÜBİTAK 1505 - University-Industry Collaboration Support Program) in cooperation with Aydin Mensucat Dosemelik Kumas San. ve Tic. A.S (Sakarya)

1 July 2026 in Karadeniz Fen Bilimleri Dergisi
Verified
Journal Article
Open access
GKGürsel Korkmaz
Gürsel Korkmaz
HGHayreddin Gezegen
Hayreddin Gezegen
UTUğur Tutar
Uğur Tutar
DKDilek Kut
Dilek Kut
Hastane kaynaklı enfeksiyonlar, hastanede kalış sürelerini artırmakta ve ulusal ekonomiler üzerinde baskı oluşturmaktadır. Antimikrobiyal direncin artması, yeni antimikrobiyal ajanların geliştirilmesini ve enfeksiyonların önlenmesine yönelik daha etkili yöntemlerin uygulanmasını gerektirmektedir. Antimikrobiyal tekstiller, hastane kaynaklı enfeksiyonların ve antibiyotik direnç genlerinin yayılmasını azaltmak için önemli araçlardır. Bu çalışmada, Claisen-Schmidt reaksiyonu yoluyla iki kalkon bileşiği (K1 ve K2) sentezlenmiş ve tek jarse kumaşlara uygulanmıştır. Kumaşların antimikrobiyal aktivitesini nicel ve nitel yöntemler kullanarak değerlendirilmiştir. Taramalı elektron mikroskobu ve Fourier dönüşümlü kızılötesi analizleri, her iki kalkon bileşiğinin de %1 ve üzerindeki konsantrasyonlarda işlem görmüş kumaşlarda bulunduğunu göstermiştir. Kantitatif antibakteriyel analiz, %1 ve %4 konsantrasyonlarında kalkon uygulanan pamuk kumaşların Staphylococcus aureus'a karşı %61,00–%86,66 oranında bakteriyel büyümeyi inhibe ettiğini göstermiştir.