29 October 2010 in Journal of Wood Science
The durability of wood-based panels was evaluated by comparing the bending properties of panels subjected to five accelerated aging treatments with the bending properties of panels that had experienced 5 years of outdoor exposure in Shizuoka City, Japan. In each accelerated aging treatment, methylene diphenyl diisocyanate-bonded panels showed higher bending retention than phenol formaldehyde (PF)-bonded panels. The bending retentions after six repeated cycles of the JIS-B, APA D-1, and ASTM treatments showed a correspondence of nearly one-to-one in the data for the three different treatments. The Shizuoka City 5-year outdoor exposure test data showed that the bending retentions of all panels decreased with time. In particular, the bending retentions of PF resin-bonded particleboard and oriented strandboard made from aspen were less than 30% and 10% of the original values, respectively, after the 5-year exposure period. The deterioration of the bending properties after the 5-year outdoor exposure in Shizuoka City was the same as that for six repetitions of the ASTM treatment.
29 July 2010 in Journal of Wood Science
In this study, the durability of wood-based panels was evaluated by comparing the internal bond (IB) strength retention after five different laboratory-based accelerated aging tests with the IB retention after 5 years of outdoor exposure in Shizuoka City. In each accelerated aging test, the IB retention of MDI-bonded panels showed high retention compared to other panels. Outdoor exposure in Shizuoka City resulted in an IB retention value for particleboard (PF) and oriented strandboard (aspen) of less than 10% after the 5-year exposure period. Medium-density fiberboards maintained their initial IB strength over the same period. Calculation of the mean IB retention for all board types allowed comparison of the severity of aging between the accelerated test methods and outdoor exposure. The ASTM six-cycle test method was the most severe among the standard treatment cycles applied.
6 July 2017 in Journal of Wood Science