We present a simulation study of the negative capacitance effect incorporating leakage through the ferroelectric (FE) negative capacitor. The dynamics of the FE is modeled using the Landau-Khalatnikov equation. When an FE and a dielectric are simply connected in series without a metal contact between them, the stabilization of negative capacitance remains unchanged irrespective of leakage. However, when a metal is used, any finite leakage through the FE makes it impossible to stabilize negative capacitance at the steady state. Nonetheless, when a voltage is applied, the series configuration enters the negative capacitance state and as long as the gate voltage is cycled faster than the time needed by the leakage current to discharge all the capacitors, the transistor shows improved subthreshold swing. These results are expected to provide insight into understanding and analyzing recent experimental results on negative capacitance.
We demonstrate a nonvolatile single transistor ferroelectric gate memory device with ultra-thin (5.5 nm) Hf0.8Zr0.2O2 (HZO) fabricated using a self-aligned gate last process. The FETs are fabricated using silicon-on-insulator wafers, and the ferroelectric is deposited with atomic layer deposition. The reported devices have an ON/OFF drain current ratio of up to 106, a read endurance of > 1010 read cycles, and a program/erase endurance of 107 cycles. Furthermore, healing of the transistor after gate insulator breakdown is demonstrated.
Transient negative capacitance effects in epitaxial ferroelectric Pb(Zr0.2Ti0.8)O3 capacitors are investigated with a focus on the dynamical switching behavior governed by domain nucleation and growth. Voltage pulses are applied to a series connection of the ferroelectric capacitor and a resistor to directly measure the ferroelectric negative capacitance during switching. A time-dependent Ginzburg-Landau approach is used to investigate the underlying domain dynamics. The transient negative capacitance is shown to originate from reverse domain nucleation and unrestricted domain growth. However, with the onset of domain coalescence, the capacitance becomes positive again. The persistence of the negative capacitance state is therefore limited by the speed of domain wall motion. By changing the applied electric field, capacitor area or external resistance, this domain wall velocity can be varied predictably over several orders of magnitude. Additionally, detailed insights into the intrinsic material properties of the ferroelectric are obtainable through these measurements. A new method for reliable extraction of the average negative capacitance of the ferroelectric is presented. Furthermore, a simple analytical model is developed, which accurately describes the negative capacitance transient time as a function of the material properties and the experimental boundary conditions.
We analyze the effects of ferroelectric leakage on the performance of a negative capacitance field-effect transistor (NCFET), which has an intermediate metallic layer between the ferroelectric and the high-K dielectric. We show that, when designed without taking the dielectric leakage into account, the NCFET performance can actually degrade significantlywith respect to that of the baseline FET. To overcome these detrimental effects of leakage, we propose the concept of work-function engineering, where metals of dissimilar work-functions are used for the external gate electrode and the intermediate metallic layer. Using this approach, the ferroelectric charge-voltage characteristic is shifted along the voltage axis, which results in superior performance of the NCFET.
27 June 2017 in IEEE Transactions on Electron Devices
Negative capacitance FETs (NCFETs) have attracted significant interest due to their steep-switching capability at a low voltage and the associated benefits for implementing energy-efficient Boolean logic. While most existing works aim to avoid the ${I}_{D}$ – ${V}_{G}$ hysteresis in NCFETs, this paper exploits this hysteresis feature for logic-memory synergy and presents a custom-designed nonvolatile NCFET D flip-flop (DFF) that maintains its state during power outages. This paper also presents an NCFET fabricated for this purpose, showing <10 mV/decade steep hysteresisedges and high, up to seven orders inmagnitude, ${R}_{\text {DS}}$ ratio between the two polarization states. With a device-circuit codesign that takes advantage of the embedded nonvolatility and the high ${R}_{\text {DS}}$ ratio, the proposed DFF consumes negligible static current in backup and restore operations, and remains robust even with significant global and local ferroelectric material variations across a wide 0.3–0.8 V supply voltage range. Therefore, the proposed DFF achieves energy-efficient and low-latency backup and restore operations. Furthermore, it has an ultralow energy-delay overhead, below 2.1% in normal operations, and operates using the same voltage supply as the Boolean logic elements with which it connects. This promises energy-efficient nonvolatile computing in energy-harvesting and power-gating applications.