Composite patch repairing technique of damaged structure has a substantial potential in aircraft maintenance and crack repair in Aluminium alloy. In this work unidirectional Carbon Fiber Reinforced Polymer (CFRP) patch separation from Aluminium alloy surface is studied through interfacial shear stress point of view whereas earlier studies focused their attention on fracture toughness parameters like stress intensity factor (K) and J-integral. These studies elaborated the importance of patch shape, size and material on fracture toughness. To study interfacial shear stress inclined crack is made in Aluminium alloy sheet and CFRP patch is applied by epoxy adhesives. When the repaired Aluminium alloy model is simulated in Abaqus the numerical solution showed reduction in the J-integral but in actual experiments patches tend to delaminate from the leading edge and the crack face. It is observed that out of plane shear stresses τ 23 play an important role in delaminating the patch from the Aluminium alloy surface. To suppress the delamination by reducing interfacial shear stress, ply thickness was varied by suggested ply drop technique. Design of experiment is conducted for optimum sequence of CFRP ply. Three configurations show reduced interfacial shear stress. This is validated by testing the specimen on universal testing machine.
The paper investigates nonadditive mappings \(\Omega: \Re \to \Re\) on a prime ring \(\Re\) with involution \( * \), characterized by satisfying one of the following conditions: \begin{enumerate} \item \( [\Omega(u), \Omega(v)]_\bullet = [u, v]_\bullet \) for all \( u, v \in \Re \). \item \( [\Omega(u), v]_\bullet = [u, \Omega(v)]_\bullet \) for all \( u, v \in \Re \). \item \( \Omega(u \bullet v) = \Omega(u) \bullet v \) for all \( u, v \in \Re \). \end{enumerate} Furthermore, the paper characterizes generalized bi-skew Jordan derivations within prime \( * \)-rings and examines the implications of these results in the context of various operator algebras.
15 January 2026 in International Journal of Hydrogen Energy
Customer churn prediction is a crucial application of machine learning in business analytics. This article presents a controlled benchmarking of a multilayer perceptron model trained with one-hot encoding and standard scaling using 10,000 customer records with 12 features. Data pre-processing was performed using one-hot encoding and standard scaling to improve model generalisation. The model achieved an ROC AUC of 0.8640 with a recall of 0.4178 and an F1 score of 0.5534. The measure of correct predictions among cases labelled positive (precision) was relatively high at 0.8214 ± 0.0253. The moderately low false-positive rate indicates that the model rarely misclassifies non-churners as churners, which is very important for cost-efficient customer retention programs. A group-level heterogeneity review showed that model performance, measured by BRIER scores, was best for France (0.076439), followed by Spain (0.077394), and worst for Germany (0.106267). The model successfully identified the 7 most important fields of judgement, with permutation scores ranging from 0.000147 to 0.120842. The calibration test helps identify underconfident and overconfident model performance through quantile bins. The performance is evaluated using a bin range from 0.12 to 0.25, with a trustworthy prediction for low- to mid-risk customers. A comparative analysis with basis models of machine learning has shown that the best overall accuracy (0.8720) and balanced F1-score (0.6098) were obtained using the Gradient Boosting algorithm, with the best performance, while the proposed Neural Network with categorical encoding and standard scaling attained the highest precision (0.8528), effectively minimising false positives in churn detection. Although the PR_AUC was slightly lower (0.7140), the model had better recall (0.4128) and an equal ROC_AUC (0.8657), indicating the proposed model’s strength and ability to operate on complex, high-dimensional churn data.
The present study investigates the microstructural evolution and damping behavior of AA2024 aluminum alloy subjected to friction stir processing (FSP), with emphasis on establishing a quantitative structure-property relationship across multiple length scales. Optical microscopy and ImageJ analysis showed a considerable reduction in average grain size, from 58 ± 11 µm in the base alloy to 5.4 ± 1.3 µm in the stir zone, indicating extensive refinement and homogeneity. Scanning electron microscopy revealed fragmentation and redistribution of coarse second-phase particles. The average particle size decreased from 2.8 ± 0.9 to 0.9 ± 0.3 µm post-processing. Transmission electron microscopy and selected-area diffraction investigations revealed nanoscale particle refinement (from ~ 62 ± 15 to ~ 22 ± 7 nm), increased defect density, and lattice distortion in the treatment region. Dynamic mechanical investigation revealed a consistent increase in damping capacity of the FSPed alloy across the entire frequency range. The improved damping response is due to a combination of increased grain-boundary density, refined particle-matrix interfaces, and defect-mediated microplastic accommodation caused by friction stir processing. Overall, the findings support FSP as an efficient surface modification technique for altering the microstructure and enhancing the functional damping performance of AA2024 aluminum alloy.