A. K. M. Ayatullah Hosne Asif

A. K. M. Ayatullah Hosne Asif

Auto-generated profile, based on publicly available information

A. K. M. Ayatullah Hosne Asif

Department of Textile Engineering Mawlana Bhashani Science and Technology University Santosh Tangail Bangladesh

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 January 2018 in International Journal of Current Engineering and Technology
Verified
Journal Article
Open access
AAA.K.M. Ayatullah Hosne Asif
A.K.M. Ayatullah Hosne Asif
ZHZayedul Hasan
Zayedul Hasan
Nanotechnology is considered as one of the most promising technologies for the 21st century. Nanoscience along with nanotechnology encompasses the study and application of very small things and can be used across all the other science fields such as physics, chemistry, biology, materials science, and engineering. This technology overcomes the drawback of applying traditional methods to impart certain properties to textile materials. There is no hesitation that in the upcoming years, nanotechnology will break through into every vicinity of the textile industry. Application of nanotechnology in modern textile lies in areas where innovative principles will be combined into long-lasting, multifunctional textile structures without compromising the intrinsic textile properties including aesthetic, breathability, flexibility etc. The current condition of nanotechnological use in textiles arena is reviewed with an emphasis on improving various properties of textiles.

24 January 2017 in Science Journal of Energy Engineering
Verified
Journal Article
Open access
PDF file
AAA. K. M. Ayatullah Hosne Asif
A. K. M. Ayatullah Hosne Asif
The purpose of this paper was to investigate the overview of sustainability in apparel manufacturing industry and why developing country suppliers are adopting environmentally and socially sustainable practices and how the implementation process is both hindered and enabled. Presently sustainability of fashion industry in the worldwide is the major considerable issue. The much talked concern is for the favor of fashion’s sustainability around the world. Many organizations and fashion conscious personalities have come forward to uphold the further extension of the campaign of good environment for tomorrows, but the Bangladeshi garment and textile industries are far beyond of this consciousness and it poses a risk of losing the world market. On the other hand, fashion for the morality or ethical issues is one of the key concepts for the humanity and sustainability point of view. It is high time to implement special strategies and approaches towards the sustainability. Social sustainability improvements benefit vulnerable workers, help suppliers develop longer term relationships with transnational companies and contribute to economic growth. In terms of the working environment, Bangladeshi apparel industries are facing great challenges at present. Fire accidents are common in garment factories and recent building collapses pose a great threat to its future. Moreover, the workers receive the lowest wages of the world that makes them unsatisfied, causes often clashes and violence during protests against low wages. This study has considered the working environment, fire and safety issues of the garment industries of Bangladesh and suggests significant initiatives towards better environment and sustainability.

29 August 2016 in Advances in Materials
Verified
Journal Article
Open access
PDF file
MIMd. Shaheen Iqbal
Md. Shaheen Iqbal
MMMd. Abdullah Al Mamun
Md. Abdullah Al Mamun
MSMd. Abu Bakar Siddiquee
Md. Abu Bakar Siddiquee
AAA. K. M. Ayatullah Hosne Asif
A. K. M. Ayatullah Hosne Asif
The effect of finishing machine parameters on dimensional stability of single lacoste cotton knitted fabric was studied in this research. The dimensional properties of the single lacoste cotton knitted fabric such as shrinkage and spirality were investigated. All tests were carried out according to the ISO standards. In this research effect of dryer machine, stenter machine and compactor machine parameters on dimensional stability of single lacoste cotton knitted fabric were evaluated. The surface analysis of single lacoste cotton knitted fabrics were examined by scanning electron microscopy (SEM) on the samples of after drying, stentering and compacting respectively. The surface analysis of single lacoste cotton knitted fabric was also investigated by SEM on the softener treated and softener untreated samples after compacting process. From the result it was observed that fabrics show lowest shrinkage in both length and width wise and spirality for drying process than the stentering process. It was also observed that length wise and width wise shrinkage and spirality of the fabrics become gradually better by increasing the overfeed % of both dryer and compactor machine. On the other hand length wise shrinkage of the fabrics become successively lower and width wise shrinkage of the fabrics become gradually higher by increasing the diameter of both dryer and compactor machine. But stretching of both dryer and compactor machine diameter has no significant influence on spirality. It was also noticed that width wise shrinkage of the fabric becomes gradually better and spirality becomes gradually higher by increasing the felt tension of the compactor machine.

1 December 2019 in Manufacturing Science and Technology
Verified
Journal Article
Open access
PDF file
MRMAHBUBUR RAHMAN
MAHBUBUR RAHMAN
AAA. K. M. Ayatullah Hosne Asif
A. K. M. Ayatullah Hosne Asif
PSPriti Sarker
Priti Sarker
BSBappi Sarker
Bappi Sarker
This research work was endeavored to improve tensile strength of viscose woven fabric by using chemical finishes like water repellent finishes with cross linking agent and softener. In this work, 100% viscose woven fabric was used and different types of samples were prepared by treating water repellent finishes, cross linking agent and softeners. The sample was investigated by tensile strength test (ASTM D5034), spray test (AATCC-22), water vapor test (cup method) and moisture regain test (ASTM D2495 oven dry method). Eight types of recipes were used in this research. For the variation of C 6-fluorocarbon the sample code-B (C 6-fluorocarbon 60 g/l, cross-linking agent 15 g/l and softener 10 g/l) showed better result in tensile strength and water spray test. Taking the amount of C 6-fluorocarbon (60 g/l) as constant and making variation cross linking agent which reached a conclusion that, sample-B1 (C 6-fluorocarbon 60 g/l, cross-linking agent 05 g/l and softener 10 g/l) showed better result for wet tensile strength, water spray test and moisture regain but showed less water vapor permeability. From this experiment it was evident that recipe which belongs to sample code B1 is suitable for improving the tensile strength of viscose fabric.

1 January 2016 in Science Research
Verified
Journal Article
Open access
PDF file
MSMd. Abu Bakar Siddiquee
Md. Abu Bakar Siddiquee
AAA. K. M. Ayatullah Hosne Asif
A. K. M. Ayatullah Hosne Asif
RKRashedul Hasan Khan
Rashedul Hasan Khan
MAMd. Tawhid Anwar
Md. Tawhid Anwar
MIMd. Saiful Islam
Md. Saiful Islam
NNNusrat Noushin
Nusrat Noushin
Dyeing and finishing parameters are important factors which have various impacts on cotton knitted two thread fleece and 1x1 rib fabrics respectively. Various technical properties like physical, dimensional and dyeing properties of 1x1 rib and two thread fleece knitted fabric after different wet processing stages and sequences have been influenced by dyeing and finishing parameters. For this purpose, it was taken two types of knitted fabrics such as 32 (S) , 1×1 Rib and 13 (S) , 28 (S) two thread fleece. The grey fabric was subjected to pretreatment process involving scouring, bleaching and enzyme wash. The pretreated fabrics were then dyed and finished to ready to stitch fabrics. At the end of each process stage, samples were collected and analyzed for various physical properties. In every state except dyeing, weight has successively decreased. Total weight loss found for 1x1 rib is 9.59% and for two thread fleece is found 11.49%. Tensile strength also decreased in each stage except in dyeing. Total strength loss found for 1x1 rib is 43.31% and for two thread fleece is 32.72%. Shrinkage has found in both length wise and width wise direction. Length wise shrinkage for 1x1 rib is found -3.35% and in width wise is found -3.50%. For fleece fabric, length wise shrinkage is found -3.25% and in width wise is found -2.70%. The abrasion resistance of different stages for 1x1 rib and fleece fabric are same in dry state. But at dyeing stage, test result is found a little different from other stages at wet state assessment. The results show that, the properties of the fabric changes to a considerable extent after each stage of wet processing. The finishing process whether the dyed fabric is padded with softener and dried in a dryer alters fabric properties to a considerable extent. It improves fabric handle and imparts a soft feel to fabric.