A highly practical diamide-type extractant, which is an alkyl diamide amine with 2-ethylhexyl alkyl chains (ADAAM(EH)), was investigated for the mutual separation of Am(III) and Cm(III). ADAAM(EH) is a multidentate ligand with one soft N-donor atom and two hard O-donor atoms as part of its central frame. This tridentate arrangement of donor atoms provides selective binding to Am(III) compared to that with Cm(III) in highly acidic media (1.5 M HNO3), resulting in separation factors of up to 5.5. A continuous liquid–liquid extraction and stripping test was conducted using a multistage countercurrent mixer-settler extractor with ADAAM(EH) in n-dodecane. In this test, the separation of Am(III) and Cm(III) was achieved with very high yield.
Alkyl diamide amine (ADAAM), a new high-performance reagent with a simple structure, was examined for the mutual separation of Am(III) and Cm(III). The combination of ADAAM and N,N,N',N'-tetraethyldiglycolamide (TEDGA) as a masking agent shows selectivity for Am(III) over Cm(III) in highly acidic media with separation factors of up to 41.
A previously reported emulsion flow (EF) extraction system does not equip the refining device for any used organic phase. Therefore, the processing of large quantities of wastewater by using the EF extractor alone could lead to the accumulation of extracted components into the organic phase, and a lowering of the extraction performance. In the present study, we developed an organic phase-refining-type EF system, which is equipped with a column for refining a used organic phase to prevent accumulation, and successfully applied it for treating uranium-containing wastewater.
In order to monitor a radioactive nuclide of strontium-90 in seawater around nuclear facilities, a solvent-extraction method for collecting Sr(II) in seawater was examined. A reversed-micellar extraction system containing an anionic surfactant AOT and a molecular extractant N,N,N′,N′-tetra(n-octyl)diglycolamide (TODGA) in n-hexane was chosen for the extraction of Sr(II) from model solutions of seawater containing 0.5 M NaCl (1 M = 1 mol dm−3), 0.05 M MgCl2, and/or 0.01 M CaCl2. The combination of AOT-forming reversed micelles and TODGA coordinating with Sr(II) as an organic ligand (extractant) was found to be efficient for the extraction of Sr(II) from model solutions. The mechanism of the reversed-micellar extraction system was also considered in the present study.
1 January 2014 in Solvent Extraction Research and Development, Japan
Simulated electroless nickel plating liquid wastes have been processed by using an emulsion flow extractor of a counter current type with a special focus on the influence of dilution of the liquid wastes on the extraction performance. The emulsion flow extractor provides efficient liquid–liquid extraction without the need for additional stirring or shaking. The solvent used in the present study was a Shellsol D70 solution containing LIX84-I as the extractant for nickel and PC88A as an accelerating agent. As a result, it was found that increasing the degree of dilution with water resulted in an improvement in nickel extractability obtained from the emulsion flow experiments with a maximum value of 96% as well as those obtained from batch experiments. Droplet sizes at the lower and the upper parts of the emulsion phases, estimated by using high-speed microscope, were 214 ± 36 µm and 415 ± 110 µm, respectively.