The light-emitting diodes (LEDs) with single, twin, triple, and quadruple photonic crystals (PCs) on p-GaN are fabricated by multiple-exposure nanosphere-lens lithography (MENLL) process utilizing the focusing behavior of polystyrene spheres. Such a technique is easy and economical for use in fabricating compound nano-patterns. The optimized tilted angle is decided to be 26.6° through mathematic calculation to try to avoid the overlay of patterns. The results of scanning electron microscopy and simulations reveal that the pattern produced by MENLL is a combination of multiple ovals. Compared to planar-LED, the light output power of LEDs with single, twin, triple, and quadruple PCs is increased by 14.78%, 36.03%, 53.68%, and 44.85% under a drive current 350 mA, respectively. Furthermore, all PC-structures result in no degradation of the electrical properties. The stimulated results indicate that the highest light extraction efficiency of LED with the clover-shape triple PC is due to the largest scattering effect on propagation of light from GaN into air.
We developed a two-step facet etching method combining inductively coupled plasma etching and KOH-based wet-etching surface treatment to achieve vertical and smooth facets for AlGaN-based ultraviolet (UV) multiple-quantum-well lasers on sapphire substrates. Stimulated emission at 272 nm was observed by optical pumping on both lasers with cleaved facets and two-step-etched facets with line widths of 1.3 nm and 0.4 nm, respectively. Compared to the laser with cleaved facets, the threshold optical power density of the laser with two-step-etched facets significantly reduced from 520 kW cm−2 to 350 kW cm−2, and the differential quantum efficiency increased onefold. Further analysis shows that the better performance of the two-step-etched AlGaN-based UV laser mainly results from the smooth and uniform facets after the wet-etching surface treatment, which is an effective and controllable approach combined with dry etching for laser facet fabrication.