4 February 2022 in Renewable Energy
18 November 2021 in Engineering Computations
Purpose: The purpose of this paper is to reveal the transient thermo-elasto-hydrodynamic lubrication mechanism of a bidirectional thrust bearing in a pumped-storage unit, and to propose the transient simulation method of two-way fluid-solid-thermal interaction of thrust bearing.Design/methodology/approach: The transient fluid-solid-thermal interaction method is used to simulate the three-dimensional lubrication of the thrust bearing, during the start-up and shutdown process of a pumped storage unit. A pad including an oil hole is modelled to analyze the temporal variation of lubrication characteristics, such as the film pressure, thickness and temperature, during the transient operation process.Findings: The injection of the high-pressure oil sufficiently affects the lubrication characteristics on film, in which the hysteresis phenomena were found between the start-up and shutdown possess.Originality/value: This paper reveals the transient lubrication mechanism of tilting pad in a thrust bearing, by means of transient fluid-solid-thermal interaction method. Lubrication characteristics are simulated without assuming the temperature relationship between the oil film inlet and the outlet and the heat transfer on the pad free surface. This paper provides a theoretical basis for the safe design and stable operation of thrust bearings.
28 February 2022 in Advances in Materials Science and Engineering
The void coalescence under strong dynamic loading is a significant spallation process for ductile metals. Since the spallation is basically dominated by tension waves, most void coalescence studies have focused on the tension effect. However, it is known that in spallation, the material initially undergoes a strong compression wave, and then an irreversible deformation is produced by the compression wave inside the material. Therefore, in this paper, the effect of compression on the void coalescence is investigated using the molecular dynamics (MD) simulation. It was found that as the compressive strain increases, the yield strength decreases first and then increases. The results showed that due to the Bauschinger effect (BE), the yield strength decreases by 19.43% from 5.66 GPa without compressive loading to 4.56 GPa when the compressive strain is −7.5%, after which the yield strength increases. The voids do not coalesce when the compressive strain is −8%. In addition, it was found that during the compressive phase, the void surfaces would generate dislocations, which could obstruct the void coalescence in the tensile phase. Furthermore, under compressive loading, the temperature effect on the void coalescence was studied, and it was found that lower temperatures could suppress the void coalescence.