1 December 2023 in Review of Scientific Instruments
Rapid compression experiments performed using a dynamic diamond anvil cell (dDAC) offer the opportunity to study compression rate-dependent phenomena, which provide critical knowledge of the phase transition kinetics of materials. However, direct probing of the structure evolution of materials is scarce and so far limited to the synchrotron based x-ray diffraction technique. Here, we present a time-resolved Raman spectroscopy technique to monitor the structural evolutions in a subsecond time resolution. Instead of applying a shutter-based synchronization scheme in previous work, we directly coupled and synchronized the spectrometers with the dDAC, providing sequential Raman data over a broad pressure range. The capability and versatility of this technique are verified by in situ observation of the phase transition processes of three rapid compressed samples. Not only the phase transition pressures but also the transition pathways are reproduced with good accuracy. This approach has the potential to serve as an important complement to x-ray diffraction applied to study the kinetics of phase transitions occurring on time scales of seconds and above.
28 January 2025 in Journal of Applied Physics
Rapid compression experiments were performed to examine the compression rate-dependence of the γ→α phase boundary in cerium (Ce), using a piezo-driven dynamic diamond anvil cell (dDAC) coupled with time-resolved ruby fluorescence (i.e., pressure profile) measurements. Accompanying the pressure-induced γ→α transition, large volume collapse in Ce leads to an obvious anomaly (i.e., plateau) in the pressure profile, which provides a unique opportunity for locating the phase boundary. Based on the pressure profile analysis, the transition pressures were determined over compression rates spanning three orders of magnitude (100--102 GPa/s). Unlike other metals that high compression rates can shift their phase boundaries to higher pressures, Ce shows little impact of the compression rate on its γ→α phase boundary. However, our observations are in good agreement with recent results obtained through dDAC combined with time-resolved synchrotron x-ray diffraction. This finding confirms the distinct compression rate-dependent phase transition behavior of Ce and highlights the possibility to capturing kinetic effects of phase transition up to hundreds of GPa/s in a home-built laboratory previously only accessible with large-scale x-ray source facilities.
3 May 2024 in Physical Review B
The mechanical properties of materials at high pressures determine their applications in extreme conditions. Vanadium, a rare-earth metal, exhibits abnormal strength softening at high pressures. However, the mechanism of this remarkable softening is still open to debate up to now. In the present study, the dislocation density, elastic modulus, and lattice distortion effects on the strength of vanadium at high pressure are investigated systematically. The in situ dislocation density of vanadium as a function of pressure is measured. It is demonstrated that the softening mechanism of vanadium is multifaceted: the elastic modulus softening, the anomalous decrease of dislocation density, and the body-centered-cubic lattice distortion all contribute to the strength softening of vanadium. Among these factors, the elastic modulus softening is the dominant one and the abrupt drop of dislocation density has a moderate influence, while the body-centered-cubic lattice distortion has an inappreciable contribution to the anomalous strength softening of vanadium. This work highlights the general factors that affect the strengthening and softening mechanism of materials under extreme conditions.
25 May 2024 in Journal of Raman Spectroscopy
2 October 2025 in Journal of Applied Physics
The strength enhancement of materials under modest loading was first documented by Bridgman, nearly a century ago. However, specific materials present anomalous strength softening at high pressures, including copper, which is a prototype fcc metal. To reveal the underlying mechanism of this anomalous phenomenon, we employed a combined Modified Williamson–Hall and Modified Warren–Averbach analytical approach to conduct a systematic and comprehensive analysis on the macroscopic to microscopic scales. The in situ crystallite size evolution, dislocation density variation, and flow stress dependence on pressure in copper is reported for the first time. Our results demonstrate an unconventional strength softening regime in copper between 3.6 and 9.5 GPa. This anomalous weakening originates from the competition between the pressure-induced reduction in dislocation density and the decrease in grain size (Hall–Petch effect). This work elucidates universal mechanisms governing strength evolution in materials under extreme loading conditions, as well as offers a protocol to determine the crystallite size evolution, dislocation density variation, and flow stress of materials as a function of pressure.
16 June 2025 in Applied Physics Letters
In this study, we reexamined the behavior of β-Ga2O3 in diamond anvil cell at room temperature under pressures up to 80.86 GPa using in situ high-pressure Raman scattering and angle-dispersive synchrotron radiation X-ray diffraction techniques. Argon was used as a quasi-hydrostatic pressure-transmitting medium. The phase transition from low-density β-Ga2O3 to high-density α-Ga2O3 was observed, beginning at approximately 20.57 GPa and completing in the pressure range of 39.70–42.29 GPa. The α-Ga2O3 phase remains stable up to approximately 80 GPa at ambient temperature, and the β-to-α phase transition is an irreversible reconstructive phase transition. A third-order Birch-Murnaghan equation of state fit to the unit-cell volume as a function of pressure yielded a zero-pressure bulk modulus B0 of 200.2(22) GPa for β-Ga2O3, with a pressure derivative B0′ of 3.0(11) GPa. For α-Ga2O3, the fit gave B0 = 354.8(43) GPa and B0′= 2.2(8) GPa. When B0′ was fixed at 4, a re-fit of the experimental data provided B0 = 267.9(7) GPa for the α-phase, which is higher than B0 = 182.6(7) GPa for the β-phase, indicating that α-Ga2O3 exhibits greater resistance to compression. Based on high-pressure experimental results for β-Ga2O3 at different temperatures, the phase boundary for the β-to-α transition, exhibiting a negative Clapeyron slope, is presented in this study. With increasing temperature, the onset pressure of the β-to-α transition gradually decreases, and the phase transition hysteresis effect weakens.