Mobile communications have been undergoing a generational change every ten years or so. However, the time difference between the so-called “G's” is also decreasing. While fifth-generation (5G) systems are becoming a commercial reality, there is already significant interest in systems beyond 5G, which we refer to as the sixth generation (6G) of wireless systems. In contrast to the already published papers on the topic, we take a top-down approach to 6G. More precisely, we present a holistic discussion of 6G systems beginning with lifestyle and societal changes driving the need for next-generation networks. This is followed by a discussion into the technical requirements needed to enable 6G applications, based on which we dissect key challenges and possibilities for practically realizable system solutions across all layers of the Open Systems Interconnection stack (i.e., from applications to the physical layer). Since many of the 6G applications will need access to an order-of-magnitude more spectrum, utilization of frequencies between 100 GHz and 1 THz becomes of paramount importance. As such, the 6G ecosystem will feature a diverse range of frequency bands, ranging from below 6 GHz up to 1 THz. We comprehensively characterize the limitations that must be overcome to realize working systems in these bands and provide a unique perspective on the physical and higher layer challenges relating to the design of next-generation core networks, new modulation and coding methods, novel multiple-access techniques, antenna arrays, wave propagation, radio frequency transceiver design, and real-time signal processing. We rigorously discuss the fundamental changes required in the core networks of the future, such as the redesign or significant reduction of the transport architecture that serves as a major source of latency for time-sensitive applications. This is in sharp contrast to the present hierarchical network architectures that are not suitable to realize many of the anticipated 6G services. While evaluating the strengths and weaknesses of key candidate 6G technologies, we differentiate what may be practically achievable over the next decade, relative to what is possible in theory. Keeping this in mind, we present concrete research challenges for each of the discussed system aspects, providing inspiration for what follows.
13 September 2018 in IEEE Transactions on Wireless Communications
Multi-cell wireless systems usually encounter both intracell and inter-cell interference, which can be mitigated via coordinated multipoint (CoMP) transmission. Previous works on multi-cell analysis in the microwave band generally consider fully digital beamforming, requiring a complete radio-frequency chain behind each antenna. This is practically infeasible for millimeter-wave (mmWave) systems where large amounts of antennas are necessary to provide sufficient gain and to enable transmission/reception of multiple streams to/from a user. This article provides a general methodology to analytically compute the expected per-cell spectral efficiency of a mmWave multi-cell single-stream system using phase-shifter-based analog beamforming and regularized zero-forcing digital beamforming. Four analog-digital hybrid beamforming techniques for multi-cell multi-stream mmWave communication are proposed, assuming that base stations in different cells share channel state information to cooperatively transmit signals to their home-cell users. Spectral efficiency of the proposed hybrid beamforming approaches are investigated and compared using two channel models suitable for fifth-generation cellular systems, namely the 3rd Generation Partnership Project model and the NYUSIM model. Numerical results show that the benefits of base station coordination (as compared to the no-coordination case) are governed by the underlying propagation model, and the aggregate interference levels proportional to the cell radius and number of users per cell.
22 October 2020 in International Journal of Wireless Information Networks
Propagation models constitute a fundamental building block of wireless communications research. Before we build and operate real systems, we must understand the science of radio propagation, and develop channel models that both reflect the important propagation processes and allow a fair comparison of different systems. In the past five decades, wireless systems have gone through five generations, from supporting voice applications to enhanced mobile broadband. To meet the ever increasing data rate demands of wireless systems, frequency bands covering a wide range from 800 MHz to 100 GHz have been allocated for use. The standardization of these systems started in the early/mid 1980s in Europe by the European Telecommunications Standards Institute with the advent of Global System for Mobile Communications. This motivated the development of the first standardized propagation model by the European Cooperation in Science and Technology (COST) 207 working group. These standardization activities were continued and expanded for the third, fourth, and fifth generations of COST, as well as by the Third Generation Partnership Project, and the International Telecommnunication Union. This paper presents a historical overview of the standardized propagation models covering first to fifth-generation systems. In particular, we discuss the evolution and standardization of pathloss models, as well as large and small-scale fading parameters for single antenna and multiple antenna systems. Furthermore, we present insights into the progress of deterministic modelling across the five generations of systems, as well as discuss more advanced modelling components needed for the detailed simulations of millimeter-wave channels. A comprehensive bibliography at the end of the paper will aid the interested reader to dig deeper.
12 July 2017 in IEEE Wireless Communications Letters
Closed-form approximations of the expected per-terminal signal-to-interference-plus-noise-ratio (SINR) and ergodic sum spectral efficiency of a multiuser multiple-input multiple-output system are presented. Our analysis assumes spatially correlated Ricean fading channels with maximum-ratio combining on the uplink. Unlike previous studies, our model accounts for the presence of unequal correlation matrices, unequal Rice factors, as well as unequal link gains to each terminal. The derived approximations lend themselves to useful insights, special cases and show the combined impact of line-of-sight (LoS) and correlated components. Numerical results show that while unequal correlation matrices enhance the system performance, the presence of strong LoS has an opposite effect. The approximations are general and remain insensitive to changes in the system dimensions, signal-to-noise-ratios, LoS levels, and correlation levels.
26 August 2019 in IEEE Journal of Selected Topics in Signal Processing
The performance of baseband beamforming in multi-user multiple-input multiple-output (MU-MIMO) systems has been extensively studied for simplified statistical channel models where no angular parameters are taken into account. In contrast, there is little performance analysis with ray-based models, which are more physically motivated, feature prominently in standardization and have been experimentally validated. Thus, unlike previous studies, we present a mathematical framework to analyze the performance of zero forcing (ZF) and minimum mean-squared error (MMSE) combining. Using a central result for averaging in the angular domain, we derive tight approximations for the uplink signal-to-noise ratio and signal-to-interference-and-noise ratio (SINR) for ZF and MMSE processing, respectively, and the resulting spectral efficiencies. The remarkably simple expressions offer the following insights into the effects of the propagation environment. We demonstrate an improvement in performance when moving from vertical uniform rectangular array (URA) to horizontal URA to uniform linear array (ULA) antenna configurations. There is also a corresponding increase in the robustness of the performance to propagation scenarios. We demonstrate that under specific conditions increasing the angular spread can decrease the SINR for a ULA - an unexpected behavior which we link to the effects of end-fire radiation. Furthermore, our results allow us to investigate the impact of different array configurations and system parameters on the rate of convergence to favorable propagation conditions. Finally, we evaluate the spatial correlation properties intrinsically present in ray-based models, and compare them to the commonly used simple exponential model which yields equal, fixed correlation characteristics for each user.
5 July 2018 in IEEE Wireless Communications Letters
Massive multiple-input multiple-output (MIMO) is now making its way to the standardization exercise of future 5G networks. Yet, there are still fundamental questions pertaining to the robustness of massive MIMO against physically detrimental propagation conditions. On these grounds, we identify scenarios under which massive MIMO can potentially fail in Ricean channels, and characterize them physically, as well as, mathematically. Our analysis extends and generalizes a stream of recent papers on this topic and articulates emphatically that such harmful scenarios in Ricean fading conditions are unlikely and can be compensated using any standard scheduling scheme. This implies that massive MIMO is intrinsically effective at combating inter-user interference and, if needed, can avail of the base-station scheduler for further robustness.