1 January 2022 in Journal of Thermophysics and Heat Transfer
High-speed flow problems of practical interest require a solution of nonequilibrium aerothermochemistry to accurately predict important flow phenomena, including surface heat transfer and stresses....
10 July 2026 in Nuclear Fusion
An integrated tritium fuel-cycle architecture has been developed for ST-E1, a low-aspect-ratio, high-power fusion power plant. The approach couples a helium-cooled liquid-lithium breeder blanket with a dedicated circulation loop providing tritium extraction, heat removal, and inventory control within a unified system boundary. Downstream of the blanket, the tritium processing system comprises of extraction, purification, isotope separation, and storage subsystems sized to accommodate the plant’s dynamic tritium production and consumption rates. Inventory modelling is used to assess candidate extraction schemes, evaluate tritium residence and holdup, and quantify sensitivities associated with protium control and intermediate inventories. The integrated assessment indicates that the combined blanket-processing architecture can satisfy startup and steady-state tritium requirements within credible operating margins, with a low overall inventory and acceptable doubling time. The results identify tritium extraction sensitivity and fuelling efficiency as the dominant drivers of inventory performance, rather than marginal improvements in breeding ratio. Overall, the analysis demonstrates the feasibility of a self-consistent fuel cycle for ST-E1 and highlights the critical dependencies between blanket inventory management, processing throughput, and overall plant performance.
1 May 2021 in Physics of Fluids
The rate of dissociation behind a strong shock in thermochemical nonequilibrium depends on the vibrational excitation of the molecules, hence the rates become a function of translational-rotational and vibrational temperatures. The Macheret–Fridman (MF) model provides analytical expressions for nonequilibrium dissociation rates assuming the collision of molecules to be in the impulsive limit. However, the original form of the model was limited to the dissociation of homonuclear molecules. In this work, we present a general form of the Macheret–Fridman classical impulsive model by considering the dissociation of a heteronuclear molecule and present macroscopic rates applicable for modeling dissociation in computational fluid dynamics (CFD). The nonequilibrium dissociation rates from the MF-CFD model compared well with the available quasiclassical trajectory (QCT) data for some important reactions in the air. Additionally, we also present a comparison of the average vibrational energy removed in a dissociation reaction predicted by the MF-CFD model with QCT data for several reactions in air and propose some improvements to the model. The developed MF-CFD model was used to investigate various nonequilibrium flow problems and the results were compared with available experimental data. In general, the results from the MF-CFD model are promising and the model shows a possibility of becoming the standard tool for investigating nonequilibrium flows in CFD.
2 December 2025 in IEEE Transactions on Plasma Science
The concept of directly recirculating fusion machine exhaust gas, bypassing the tritium plant, to make fuel pellets was proposed in the 1990s and later termed direct internal recycling (DIR). In the DIR concept, the residual fusion fuel in the machine exhaust stream is separated from impurities locally and diverted directly to the fueling systems, bypassing isotopic separation and other processing equipment, and therefore significantly reducing the required size of the fuel processing plant, reducing plant inventory, and thus increasing the economic viability of fusion as an energy source. One concept for DIR consists of a series of cryogenic pumps to separate the impurities from the machine exhaust gas using different triple point temperatures and saturation curves of exhaust constituents. In this concept, the plasma exhaust is initially passed through an impurity trap operating at ~25–30 K to desublimate impurities such as hydrocarbons, argon, oxygen, and nitrogen. The resulting process stream will consist of DT fuel and helium. The process stream is then pumped by a continuous cryopump known as a “snail pump.” This pump is a steady-state continuous cryopump that desublimates all remaining exhaust gas constituents while allowing helium, a byproduct of the fusion reaction, to pass through. The helium is pumped to the tritium plant for processing while the desublimated material is continuously scraped off, heated up, and transported to the fueling system. This article will present the cryogenic DIR concept and outline the design and operation of the snail pump, along with results from preliminary testing. Tests to assess pumping and separation efficiency found that at D2 flows below 50.7 Pa $\cdot $ m3/s with 1% helium, the pump is capable of pumping and separating the gas with a resulting DIR fraction of >99%, with no helium entrained in the primary fuel exhaust stream. The main limitation is due to the thermal performance of the cryogenic circuits of the pump, which will be addressed in future testing.
5 August 2025 in European Journal of Pharmaceutics and Biopharmaceutics
17 February 2025 in Fusion Science and Technology