Among materials produced as colloidal quantum dots (CQDs), HgTe has a special status being the only material covering the whole infrared range from the visible to the THz (0.7–100 µm). This unique property resulting from its electronic structure, combined with an air stability and a capacity for charge conduction has generated consistent and massive efforts to produce and improve HgTe CQDs over the past two decades. Meanwhile, HgTe CQDs offer an infrared platform more advanced than any other colloidal alternatives in the mid‐wave infrared regarding their integration into advanced photonic and optoelectronic applications. Here, the latest developments of HgTe CQDs relative to the material's growth, electron structure modelling, its integration into photonic structures and its transfer as the active material from single element devices toward complex sensors and infrared imagers are reviewed. Finally, a discussion about the potential of this material for industry, rising new challenges beyond economical and production considerations at low technological readiness level, relative to the material and device design, is also included.
Light management is one of the main challenges to address when designing a sensor from a nanocrystal (NC) array. Indeed, the carrier diffusion length, limited by hopping mechanism, is much shorter than the absorption depth. Several types of resonators (plasmon, Bragg mirror, guided mode, Fabry–Perot cavity) have been proposed to reduce the volume where light is absorbed. All of them are inherently narrow bands, while imaging applications focus on broadband sensing. Here, an infrared sensor in the short and mid‐wave infrared (SWIR and MWIR) that combines three different photonic modes is proposed to achieve broadband enhancement of the light absorption. Moreover, it is shown that these three modes can be obtained from a simple structure where the NC film is coupled only to a grating and a top metallic layer. The obtained device achieves a high responsivity of >700 mA W–1, a detectivity up to 2 × 1010 Jones at 80 K, and a short response time of 11 µs.