Thanks to their remarkable spectral tunability across the entire infrared range, HgTe nanocrystals present a unique platform for designing infrared optoelectronic devices. While in recent years most of the significant advances in this domain have been made on devices at the single-pixel level, there is a growing trend toward exploring the potential of this material for imaging applications. However, until recently, focal plane arrays based on HgTe colloidal nanocrystals have been limited to the photoconductive mode, which is inherently associated with a large dark current. In this work, we demonstrate a diode stack compatible with a readout integrated circuit whose back-end processing has been optimized to ensure compatibility with a complete diode stack deposition. The diode design is also optimized to generate a Fabry–Pérot cavity in which 50% of the light is effectively absorbed at the band edge. Finally, taking benefit from the full video graphics array format, high-resolution images are taken.
In this paper, a full set of structural, optical and electrical characterizations performed on midwave infrared barrier detectors based on a Ga-free InAs/InAsSb type-II superlattice, grown by molecular beam epitaxy (MBE) on a GaSb substrate, are reported and analyzed. a Minority carrier lifetime value equal to 1 µs at 80 K, carried out on dedicated structure showing photoluminescence peak position at 4.9 µm, is extracted from a time resolved photoluminescence measurement. Dark current density as low as 3.2 × 10−5 A/cm2 at 150 K is reported on the corresponding device exhibiting a 50% cut-off wavelength around 5 µm. A performance analysis through normalized spectral response and dark current density-voltage characteristics was performed to determine both the operating bias and the different dark current regimes.