Vladislav Ivanov

Vladislav Ivanov

Auto-generated profile, based on publicly available information

Vladislav Ivanov

Ufa University of Science and Technology, Research Lab. “Sensor Systems Based on Integrated Photonics Devices”, Ufa, Russia

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 December 2022 in Sensors
Verified
Journal Article
Open access
PDF file
GVGrigory Voronkov
Grigory Voronkov
AZAida Zakoyan
Aida Zakoyan
VIVladislav Ivanov
Vladislav Ivanov
DIDmitry Iraev
Dmitry Iraev
ISIvan Stepanov
Ivan Stepanov
RKRuslan V. Kutluyarov
Ruslan V. Kutluyarov
The design of a refractometric sensing system for liquids analysis with a sensor and the scheme for its intensity interrogation combined on a single photonic integrated circuit (PIC) is proposed. A racetrack microring resonator with a channel for the analyzed liquid formed on the top is used as a sensor, and another microring resonator with a lower Q-factor is utilized to detect the change in the resonant wavelength of the sensor. As a measurement result, the optical power at its drop port is detected in comparison with the sum of the powers at the through and drop ports. Simulations showed the possibility of registering a change in the analyte refractive index with a sensitivity of 110 nm per refractive index unit. The proposed scheme was analyzed with a broadband source, as well as a source based on an optoelectronic oscillator using an optical phase modulator. The second case showed the fundamental possibility of implementing an intensity interrogator on a PIC using an external typical single-mode laser as a source. Meanwhile, additional simulations demonstrated an increased system sensitivity compared to the conventional interrogation scheme with a broadband or tunable light source. The proposed approach provides the opportunity to increase the integration level of a sensing device, significantly reducing its cost, power consumption, and dimensions.

1 January 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
GVGrigory Voronkov
Grigory Voronkov
YAYana Aleksakina
Yana Aleksakina
VIVladislav V. Ivanov
Vladislav V. Ivanov
AZAida Zakoyan
Aida Zakoyan
ISIvan Stepanov
Ivan Stepanov
RKRuslan V. Kutluyarov
Ruslan V. Kutluyarov
Lab-on-a-chip systems are currently one of the most promising areas in the development of ultra-compact sensor systems, used primarily for gas and liquid analysis to determine the concentration of impurities. Integrated photonics is an ideal basis for designing “lab-on-a-chip” systems, advantageous for its compactness, energy efficiency, and low cost in mass production. This paper presents a solution for “lab-on-a-chip” device realization, consisting of a sensor and an interrogator based on a silicon-on-insulator (SOI) integrated photonics platform. The sensor function is performed by an all-pass microring resonator (MRR), installed as a notch filter in the feedback circuit of an optoelectronic oscillator based on an electro-optic phase modulator. This structure realizes the frequency interrogation of the sensor with high accuracy and speed using a conventional single-mode laser source. The system sensitivity for the considered gases is 13,000 GHz/RIU. The results show that the use of frequency interrogation makes it possible to increase the intrinsic LoD by five orders. The proposed solution opens an opportunity for fully integrated implementation of a photonic “laboratory-on-a-chip” unit.

1 December 2023 in Journal of Optical Technology
Verified
Journal Article
Closed access
PDF file
VIVladislav Ivanov
Vladislav Ivanov
GVGrigory Voronkov
Grigory Voronkov
AGAleksandr Golubchikov
Aleksandr Golubchikov
IKIgor Kuznetsov
Igor Kuznetsov
EGElizaveta Grakhova
Elizaveta Grakhova
RKRuslan V. Kutluyarov
Ruslan V. Kutluyarov
Subject of study. Modern information technologies require sources of high-frequency radio signals (oscillators and frequency synthesizers). The essential characteristics of such devices are the phase noise levels and the side spectral components suppression coefficient. An opto-electronic oscillator based on integrated photonics technologies is a promising solution for obtaining low-noise radio signals and more effective suppression of the side spectral components. One of the key elements of such an oscillator is a phase modulator. In this study, we investigated the spectral characteristics of two opto-electronic oscillators: one based on a Mach–Zehnder modulator and another based on an electro-optical phase shifter. Aim of study. This study aimed to evaluate the characteristics of the architectures of opto-electronic oscillators based on a Mach–Zehnder phase modulator and an electro-optical phase shifter and to analyze the applicability of these architectures in telecommunications and sensing systems. Method. We simulated an electro-optical phase shifter and a phase-shifted fiber Bragg grating. The operation of both types of opto-electronic oscillators was also simulated. We calculated the quality parameters of frequency synthesizers based on the opto-electronic oscillators according to the results obtained. Main results. We considered the schemes of the opto-electronic oscillators based on the Mach–Zehnder modulator and the opto-electronic phase shifter with the phase-shifted Bragg grating as a control element for the frequency of output oscillations. We simulated the critical elements and the entire circuit and obtained the spectra of the signals at the opto-electronic oscillator output. The levels of phase noise and the suppression coefficient of the side spectral components were estimated. In telecommunication applications, owing to the lower phase noise level, it is preferable to use the oscillator based on the Mach–Zehnder modulator. In contrast, the modulator based on the phase shifter can be applied in sensing systems for frequency interrogation. Practical significance. The results obtained in this study can be used to develop microwave devices in the frequency range of up to 100 GHz and fully integrated sensing systems with frequency interrogation.

28 December 2024 in Micromachines
Verified
Journal Article
Open access
PDF file
VIVladislav Ivanov
Vladislav Ivanov
ISIvan Stepanov
Ivan Stepanov
GVGrigory Voronkov
Grigory Voronkov
RKRuslan V. Kutluyarov
Ruslan V. Kutluyarov
EGElizaveta Grakhova
Elizaveta Grakhova
Radio photonic technologies have emerged as a promising solution for addressing microwave frequency synthesis challenges in current and future communication and sensing systems. One particularly effective approach is the optoelectronic oscillator (OEO), a simple and cost-effective electro-optical system. The OEO can generate microwave signals with low phase noise and high oscillation frequencies, often outperforming traditional electrical methods. However, a notable disadvantage of the OEO compared to conventional signal generation methods is its significant frequency tuning step. This paper presents a novel approach for continuously controlling the output frequency of an optoelectronic oscillator (OEO) based on integrated photonics. This is achieved by tuning an integrated optical delay line within a feedback loop. The analytical model developed in this study calculates the OEO’s output frequency while accounting for nonlinear errors, enabling the consideration of various control schemes. Specifically, this study examines delay lines based on the Mach–Zehnder interferometer and microring resonators, which can be controlled by either the thermo-optic or electro-optic effect. To evaluate the model, we conducted numerical simulations using Ansys Lumerical software. The OEO that utilized an MRR-based electro-optical delay line demonstrated a tuning sensitivity of 174.5 MHz/V. The calculated frequency tuning sensitivity was as low as 6.98 kHz when utilizing the precision digital-to-analog converter with a minimum output voltage step of 40 μV. The proposed approach to controlling the frequency of the OEO can be implemented using discrete optical components; however, this approach restricts the minimum frequency tuning sensitivity. It provides an additional degree of freedom for frequency tuning within the OEO’s operating range, which is ultimately limited by the amplitude-frequency characteristic of the notch filter. Thus, the proposed approach opens up new opportunities for increasing the accuracy and flexibility in generating microwave signals, which can be significant for various communications and radio engineering applications.

15 May 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ELEkaterina Alexandrovna Lopukhova
Ekaterina Alexandrovna Lopukhova
GVGrigory Voronkov
Grigory Voronkov
IKIgor Kuznetsov
Igor Kuznetsov
VIVladislav Ivanov
Vladislav Ivanov
RKRuslan V. Kutluyarov
Ruslan V. Kutluyarov
EGElizaveta Grakhova
Elizaveta Grakhova
This paper introduces a new method for compressing images in energy-starved systems, like satellites, unmanned aerial vehicles, and Internet of Things nodes, which is based on coordinated group signal transformation (CGST). The transformation algorithm is a type of difference coding and may be classified as a non-transform-based image-compression method. CGST simplifies the difference signal conversion scheme using a single group codec for all signals. It considers color channels as correlated signals of a multi-channel communication system. The performance of CGST was evaluated using a dataset of 128 × 128 pixel images from satellite remote sensing systems. To adapt CGST to image compression, some modifications were introduced to the algorithm, such as fixing the procedure of the difference signals calculation to prevent any “zeroing” of brightness and supplementing the group codec with a neural network to improve the quality of restored images. The following types of neural networks were considered: fully connected, recurrent, convolution, and convolution in the Fourier space. Based on the simulation results, fully connected neural networks are recommended if the goal is to minimize processing delay time. These networks have a response time of 13 ms. Conversely, suppose the priority is to improve quality in cases where delays are not critical. In that case, convolution neural networks in the Fourier space should be used, providing an image compression ratio of 4.8 with better minimum square error and Mikowsky norm values than JPEG with the same compression ratio.

30 April 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
ELEkaterina Alexandrovna Lopukhova
Ekaterina Alexandrovna Lopukhova
GVGrigory Voronkov
Grigory Voronkov
IKIgor Kuznetsov
Igor Kuznetsov
VIVladislav Ivanov
Vladislav Ivanov
RKRuslan V. Kutluyarov
Ruslan V. Kutluyarov
EGElizaveta Grakhova
Elizaveta Grakhova
The paper describes the new method for image compression based on coordinated group signal transformation. The algorithm is a type of difference coding. Coordinated processing significantly simplifies the difference signal conversion scheme using a single group codec for all signals. The described method considers color channels as correlated signals of a multi-channel communication system. The specifics of the processed data required modification of the coordinated group processing algorithm. First, we changed how to calculate the difference signals to prevent data loss. Secondly, the group codec was supplemented with a neural network to improve the quality of reconstructed images. We considered the following types of neural networks: fully connected, recurrent, convolution, and convolution in the Fourier space. Based on the simulation results, it is best to use fully connected neural networks if the goal is to minimize processing delay time. These networks have a response time of 13 ms. On the other hand, if the priority is to improve quality in cases where delays are not critical, then convolution neural networks in the Fourier space should be used. These networks have a response time of 140 ms and are of significant interest.