15 September 2025 in Journal of Applied Physics
The thickness of the adsorption layer typically ranges from a few nanometers to several hundred nanometers, which is comparable to the interaction range of electrons with metals. Therefore, adsorbed gases can significantly influence secondary electron emission characteristics. This study investigates gas adsorption/desorption experiments using Ag samples, with N2, O2, and air as the background gases for adsorption. The effects of gas adsorption on material surface properties were analyzed, and a comparative study was conducted on secondary electron yield, secondary electron energy spectra, desorption amount, and surface x-ray photoelectron spectroscopy composition changes under different conditions—ion cleaning, gas adsorption, and thermal desorption. The results show that the secondary electron yield of a clean surface increases to varying degrees after gas adsorption, depending on the gas type and adsorption quantity. After 12 h of exposure to different gases (N2, O2, and air), the adsorption thickness reached approximately 2–3 nm, and the gas desorption amount after heating was on the order of 1015 molecules/cm2. Additionally, samples treated in an air environment exhibited significant H2 desorption, indicating that water vapor adsorption has a substantial impact on the secondary electron emission characteristics of metal surfaces.
1 August 2025 in AIP Advances
An analytical model is developed to calculate the secondary electron yield (SEY) of composite layered structures, based on two independent physical parameters of secondary electron emission. For the same material, different processing techniques can result in significant variations in material surface conditions and microstructures, resulting in discrepancies in the excitation and escape capabilities of secondary electrons. The present model integrates the secondary electron excitation mechanism with Bethe’s stopping power expression, which can calculate the average mean free path and excitation energy threshold of thin dielectric films, providing a quantitative evaluation of contributions from each layer. Good agreement is observed between model predictions and experimental results for nanometer-scale ALD-Al2O3 films on Ag substrates. The results show that SEY is strongly dependent on the film thickness. The SEY curve of the film in the composite structure resembles that of a bulk material, but with a lower peak due to the limited thickness. As the film thickness increases, a larger contribution from the top layer and a further reduced contribution from the substrate are observed. This model offers a theoretical method for SEY evaluation in layered structures and can support the film thickness design in multipactor suppression and dynode films in electron detectors.