10 May 2023 in Ultramicroscopy
Neutral helium atom microscopy, also referred to as scanning helium microscopy and commonly abbreviated SHeM or NAM (neutral atom microscopy), is a novel imaging technique that uses a beam of neutral helium atoms as an imaging probe. The technique offers a number of advantages such as the very low energy of the incident probing atoms (less than 0.1 eV), unsurpassed surface sensitivity (no penetration into the sample bulk), a charge neutral, inert probe and a high depth of field. This opens up for a range of interesting applications such as: imaging of fragile and/or non-conducting samples without damage, inspection of 2D materials and nano-coatings, with the possibility to test properties such as grain boundaries or roughness on the Å ngström scale (the wavelength of the incident helium atoms) and imaging of samples with high aspect ratios, with the potential to obtain true to scale height information of 3D surface topography with nanometer resolution: nano stereo microscopy. However, for a full exploitation of the technique, a range of experimental and theoretical issues still needs to be resolved. In this paper we review the research in the field. We do this by following the trajectory of the helium atoms step by step through the microscope: from the initial acceleration in the supersonic expansion used to generate the probing beam over the atom optical elements used to shape the beam (resolution limits), followed by interaction of the helium atoms with the sample (contrast properties) to the final detection and post-processing. We also review recent advances in scanning helium microscope design including a discussion of imaging with other atoms and molecules than helium.
4 September 2023 in Nature Physics
26 November 2021 in Journal of Physics D: Applied Physics
Developing the next generation of scanning helium microscopes requires the fabrication of optical elements with complex internal geometries. We show that resin stereolithography (SLA) 3D printing produces low-cost components with the requisite convoluted structures whilst achieving the required vacuum properties, even without in situ baking. As a case study, a redesigned pinhole plate optical element of an existing scanning helium microscope was fabricated using SLA 3D printing. In comparison to the original machined component, the new optical element minimised the key sources of background signal, in particular multiple scattering and the secondary effusive beam.
17 February 2023 in Nature Communications
Nanoscale thin film coatings and surface treatments are ubiquitous across industry, science, and engineering; imbuing specific functional or mechanical properties (such as corrosion resistance, lubricity, catalytic activity and electronic behaviour). Non-destructive nanoscale imaging of thin film coatings across large (ca. centimetre) lateral length scales, crucial to a wide range of modern industry, remains a significant technical challenge. By harnessing the unique nature of the helium atom–surface interaction, neutral helium microscopy images these surfaces without altering the sample under investigation. Since the helium atom scatters exclusively from the outermost electronic corrugation of the sample, the technique is completely surface sensitive. Furthermore, with a cross-section that is orders of magnitude larger than that of electrons, neutrons and photons, the probe particle routinely interacts with features down to the scale of surface defects and small adsorbates (including hydrogen). Here, we highlight the capacity of neutral helium microscopy for sub-resolution contrast using an advanced facet scattering model based on nanoscale features. By replicating the observed scattered helium intensities, we demonstrate that sub-resolution contrast arises from the unique surface scattering of the incident probe. Consequently, it is now possible to extract quantitative information from the helium atom image, including localised ångström-scale variations in topography.
23 December 2021 in Physical Review Letters
The change in bending rigidity with temperature for 2D materials is highly debated: theoretical works predict both increase and decrease. Here we present measurements of , for a 2D material: -stacked bilayer graphene. We obtain from phonon dispersion curves measured with helium atom scattering in the temperature range 320–400 K. We find that the bending rigidity increases with temperature. Assuming a linear dependence over the measured temperature region we obtain by fitting the data. We discuss this result in the context of existing predictions and room temperature measurements.
25 March 2024 in Ultramicroscopy
Neutral helium atom microscopy is a novel microscopy technique which offers strictly surface-sensitive, non-destructive imaging. Several experiments have been published in recent years where images are obtained by scanning a helium beam spot across a surface and recording the variation in scattered intensity at a fixed total scattering angle θSD and fixed incident angle θi relative to the overall surface normal. These experiments used a spot obtained by collimating the beam (referred to as helium pinhole microscopy). Alternatively, a beam spot can be created by focusing the beam with an atom optical element. However up till now imaging with a focused helium beam has only been demonstrated in transmission (using a zone plate). Here we present the first reflection images obtained with a focused helium beam (also using a zone plate). Images are obtained with a spot size (FWHM) down to 4.7μm±0.5μm, and we demonstrate focusing down to a spot size of about 1μm. Furthermore, we present experiments measuring the scattering distribution from a focused helium beam spot. The experiments are done by varying the incoming beam angle θi while keeping the beam-detector angle θSD and the point where the beam spot hits the surface fixed - in essence, a microscopy scale realization of a standard helium atom scattering experiment. Our experiments are done using an electron bombardment detector with adjustable signal accumulation, developed particularly for helium microscopy.