12 June 2019 in Journal of Intelligent Manufacturing
MDMaharshi Harshadbhai Dhada
Maharshi Harshadbhai Dhada
This paper provides a methodology to assess the optimal multi-agent architecture for collaborative prognostics in modern fleets of assets. The use of multi-agent systems has been shown to improve the ability to predict equipment failures by enabling machines with communication and collaborative learning capabilities. Different architectures have been postulated for industrial multi-agent systems in general. A rigorous analysis of the implications of their implementation for collaborative prognostics is essential to guide industrial deployment. In this paper, we investigate the cost and reliability implications of using different multi-agent systems architectures for collaborative failure prediction and maintenance optimization in large fleets of industrial assets. Results show that purely distributed architectures are optimal for high-value assets, while hierarchical architectures optimize communication costs for low-value assets. This enables asset managers to design and implement multi-agent systems for predictive maintenance that significantly decrease the whole-life cost of their assets.
10 May 2023 in Ultramicroscopy
Neutral helium atom microscopy, also referred to as scanning helium microscopy and commonly abbreviated SHeM or NAM (neutral atom microscopy), is a novel imaging technique that uses a beam of neutral helium atoms as an imaging probe. The technique offers a number of advantages such as the very low energy of the incident probing atoms (less than 0.1 eV), unsurpassed surface sensitivity (no penetration into the sample bulk), a charge neutral, inert probe and a high depth of field. This opens up for a range of interesting applications such as: imaging of fragile and/or non-conducting samples without damage, inspection of 2D materials and nano-coatings, with the possibility to test properties such as grain boundaries or roughness on the Å ngström scale (the wavelength of the incident helium atoms) and imaging of samples with high aspect ratios, with the potential to obtain true to scale height information of 3D surface topography with nanometer resolution: nano stereo microscopy. However, for a full exploitation of the technique, a range of experimental and theoretical issues still needs to be resolved. In this paper we review the research in the field. We do this by following the trajectory of the helium atoms step by step through the microscope: from the initial acceleration in the supersonic expansion used to generate the probing beam over the atom optical elements used to shape the beam (resolution limits), followed by interaction of the helium atoms with the sample (contrast properties) to the final detection and post-processing. We also review recent advances in scanning helium microscope design including a discussion of imaging with other atoms and molecules than helium.
6 September 2018 in IFAC-PapersOnLine
1 November 2018 in Review of Scientific Instruments
Supersonic molecular beams are used in many applications ranging from spectroscopy and matter wave optics to surface science. The experimental setup typically includes a conically shaped, collimating aperture, the skimmer. It has been reported that microskimmers with diameters below 10 μm produce beams with significantly broader velocity distributions (smaller speed ratios) than larger skimmers. Various explanations for this phenomenon have been proposed, but up till now, only a limited amount of data has been available. Here we present a systematic study of the velocity distribution in microskimmer supersonic expansion helium beams. We compare a 4 μm diameter skimmer with a 390 μm diameter skimmer for room temperature and cooled beams in the pressure range 11-181 bars. Our measurements show that for properly aligned skimmers, the only difference is that the most probable velocity for a given pressure and temperature is slightly lower for a microskimmed beam. We ascribed this to the comparatively narrow and long geometry of the microskimmers which can lead to local pressure variations along the skimmer channel. We compare our measurements to a model for the supersonic expansion and obtain good agreement between the experiments and simulations.
19 May 2021 in Physical Review A
Three-dimensional mapping of microscopic surface structures is important in many applications of technology and research, including areas as diverse as microfluidics, MEMS, and geoscience. However, on the nanoscale, using established techniques for such imaging can be extremely challenging. Scanning helium microscopy is a technique that uses neutral helium atoms as a probe, enabling completely nondestructive imaging. The technique is broadly applicable and ideal for many otherwise difficult-to-image materials, such as insulators, ultrathin nanocoatings, and biological samples. Here we present a method for implementation and operation of a stereo helium microscope, by applying the photometric stereo method of surface reconstruction to helium microscopy. Four detectors around the sample are typically required, but we show how sample rotation can be used to perform stereo reconstruction with a single-detector instrument, or to improve the quality of the reconstructed surface by increasing the number of independent measurements. We examine the quality of the reconstructed surface and show that for low aspect ratio good absolute height is recovered. For features with height/width the shape of the surface is still recovered well (8% error) despite multiple scattering and masking of the helium beam by surface topography. Therefore, it is possible to perform accurate reconstruction of the shape of nanoscale structures with a height to width ratio of at least unity.
1 February 2016 in Review of Scientific Instruments
Time-of-flight (TOF) is a standard experimental technique for determining, among others, the speed ratio S (velocity spread) of a molecular beam. The speed ratio is a measure for the monochromaticity of the beam and an accurate determination of S is crucial for various applications, for example, for characterising chromatic aberrations in focussing experiments related to helium microscopy or for precise measurements of surface phonons and surface structures in molecular beam scattering experiments. For both of these applications, it is desirable to have as high a speed ratio as possible. Molecular beam TOF measurements are typically performed by chopping the beam using a rotating chopper with one or more slit openings. The TOF spectra are evaluated using a standard deconvolution method. However, for higher speed ratios, this method is very sensitive to errors related to the determination of the slit width and the beam diameter. The exact sensitivity depends on the beam diameter, the number of slits, the chopper radius, and the chopper rotation frequency. We present a modified method suitable for the evaluation of TOF measurements of high speed ratio beams. The modified method is based on a systematic variation of the chopper convolution parameters so that a set of independent measurements that can be fitted with an appropriate function are obtained. We show that with this modified method, it is possible to reduce the error by typically one order of magnitude compared to the standard method.