Because they are so widespread, the use of saponites is significant in many industries. The modification of saponite-rich clay minerals is known to improve their existing characteristics and may provide new functional properties. The objective of the present paper was to characterize the effects of adding nanosized graphene-like molybdenum (Mo) and tungsten (W) sulfides on the textural and surface characteristics of composites based on native saponite and saponite pre-modified with nanoscale magnetite. The textural characteristics were investigated by the nitrogen adsorption-desorption method and scanning electron microscopy. The total acidity, Hammett Brönsted centers, and Quasi-Equilibrium Thermo Desorption (QE-TD) Lewis centers were characteristics used to probe the acid-base properties of the modified composites. In all cases, modification proved to have a significant effect on both the surface and textural properties of the clay matrix. Modification of the native saponite by graphene-like Mo and W sulfides resulted in a decrease in the specific surface area, except a slight increase in the surface area of the magnetite-containing saponite was observed. Analysis of the acid-base characteristics of native and magnetite-modified saponite (MMS) indicated the ability of modified MoS2 and WS2 additives to alter the acid-base state of the surface. The addition of graphene-like Mo and W sulfides increased the total acidity of native and MMS, with MoS2 modification being more promising because, in almost all the samples, saponite composite materials increased the number of both Brönsted and Lewis active centers compared with WS2, which was determined by the corresponding methods. The acid-base characteristics of the saponite-containing samples, which were studied in an aqueous medium by various methods, are in good correlation with each other, and are consistent with the sorption activity of cationic and anionic dyes.
This article is devoted to TiO2/ZnO nanocomposites creation by modifying with the commercial TiO2/P90 product using the impregnation method and identifying the effect of the ZnO modifier on its adsorption, structural, photocatalytic, and electrical properties. The synthesized TiO2/ZnO nanocomposites were characterized by XRD, XRF, XPS, and low-temperature nitrogen adsorption-desorption methods. As a result, nanostructured TiO2/ZnO composites with the ZnO content of 2, 5, 10, and 15 were obtained. It was shown that the phase composition of TiO2/P90 does not change during the nanocomposite synthesis. XPS studies of TiO2/ZnO nanocomposites indicated the presence of Ti4+, Zn2+, O2−, and OH states on their surface, which is associated with TiO2, ZnO, and hydroxide ions. The nitrogen adsorption-desorption method showed that the commercial TiO2/P90 sample is nonporous, and all TiO2/ZnO nanocomposites are characterized by almost the same homogeneous mesoporous structure. Experimentally established sorption and photocatalytic properties depend on the specific surface area and electrostatic interaction with dyes. The effect of the ZnO modifier on I-V characteristics of the TiO2/P90 sample was revealed. The obtained experimental data showed that the TiO2/P90 sample contains one type of current carriers, and TiO2/2ZnO and TiO2/5ZnO nanocomposites are characterized by two types of current carriers.
The paper is devoted to the development of a method for obtaining and using iron-containing sorption materials for the effective removal of arsenic compounds of different oxidation states from an aqueous medium. It is known that arsenic compounds have a harmful effect on biota due to high toxicity. The paper theoretically and experimentally substantiates the choice of iron-containing materials as the main sorbent material for arsenic compounds removal from the aqueous medium. A series of iron-containing adsorbents, including powder, activated carbon-based granular and suspension sorbents, was synthesized by different methods (heterogeneous and homogeneous precipitation). Experimental studies have confirmed that the adsorption of arsenate ions on iron-containing sorption materials corresponds to the pseudo-second order of the reaction (R2=0.999), which is inherent in adsorption processes. It was determined that oxyhydroxide sorption materials obtained by the homogeneous precipitation demonstrate higher sorption activity (up to 70 mg/g for As(III) and over 70 mg/g for As(V)). It was found that activated carbon-based iron-containing sorption materials showed approximately 2 times lower efficiency than powder iron(III) oxide, iron(III) oxyhydroxide and amorphous iron(III) hydroxide. It was shown that the use of microfiltration membranes is promising for the removal of spent suspension iron-containing sorption materials. Experimental studies have confirmed that the use of the combination “fine-particle iron(III) oxyhydroxide/membrane” allows removing arsenic compounds from contaminated water to the sanitary requirements level (less than 10 μg As/l) and separating effectively the spent fine-particle sorbent from water