This paper proposed a method for determining the cohesive parameters of fibre-reinforced composite interfaces based on finite element analysis (FEA) and machine learning. 3D FEA models with different boundary conditions and 2D FEA models were created to simulate the process of microdroplet tests, and to compare their maximum reaction forces and the time costs. The proper FEA model that is accurate and efficient was adopted to establish the data set of machine learning. Machine learning based on the FEA data set was divided into two steps: feature selection and kernel ridge regression (KRR) prediction. Feature selection was carried out to confirm the validity of the features, to obtain the optimal parameter of KRR prediction and to quantitatively illustrate the effect of the cohesive parameters on the maximum reaction force. Interfacial shear strength (IFSS) and interfacial fracture toughness (IFFT) of a poly ( p-phenylene benzobisoxazole) (PBO) fibre-reinforced epoxy composite were successfully predicted by the KRR method without extra mechanical theories or assumptions.
The numerical method for predicting the permeability of a laminated composite based on matrix cracks is improved to meet the application at a cryogenic temperature. The number of the parameters tha...
Linerless composite cryogenic tank is significant for weight reducing in launch vehicles, and a microscopic-to-macroscopic model is presented in this paper to capture the burst behaviors of the car...
1 March 2021 in Mechanics of Advanced Materials and Structures
Three types of representative unit cell (RUC) of [±θ/904]S composite laminates and cracked plies were created to obtain the constitutive model of the cracked plies and to compare their accuracy of the calculation. The RUCs represent the damaged laminates, cracked plies, and cracked plies with additional constraints. A correction factor was defined to improve the accuracy of transverse modulus estimation using the RUC of cracked plies with constraints. The correction factor and numerical results were discussed to illustrate the constraint effect of the adjacent plies on the cracked plies in terms of stiffness, orientation, and thickness.
24 August 2023 in Mechanics of Advanced Materials and Structures