1 May 2012 in Bioresource Technology
1 July 2015 in Algal Research
An integrated microalgae-based system for urban wastewater treatment, microalgae production and bioenergy generation through anaerobic digestion was evaluated over a period of one year. The pilot HRAP was effective at removing COD (similar to 80%) and ammonium(similar to 95%) and robust, despite common variations in wastewater composition and weather conditions in the Mediterranean region. Biomass production showed a strong seasonality, reaching an annual average of 10 g TSS/m(2).day and the highest values in spring (23 g TSS/m(2).day). Conversely, the macromolecular composition was fairly constant (58% proteins, 22% carbohydrates and 20% lipids). Predominant microalgae species varied throughout the year, influencing biogas production. Indeed, the anaerobic biodegradability of harvested biomass was 20-25% in July-October 2012 and May-July 2013 and 25-38% in November 2012-April 2013. Adapting the content of particulate inert COD in Anaerobic Digestion Model No. 1 (ADM1) was crucial for model calibration. After adjustment, ADM1 was able to predict microalgae anaerobic digestion performance, which showed an average methane yield of 0.09 L CH4/g COD at 15 days HRT and 0.16 L CH4/g COD at 20 days HRT. (C) 2015 Elsevier B.V. All rights reserved.Postprint (published version
1 February 2003 in Water Research
16 January 2018 in Water Science & Technology
A researcher or practitioner can employ a biofilm model to gain insight into what controls the performance of a biofilm process and for optimizing its performance. While a wide range of biofilm-modeling platforms is available, a good strategy is to choose the simplest model that includes sufficient components and processes to address the modeling goal. In most cases, a one-dimensional biofilm model provides the best balance, and good choices can range from hand-calculation analytical solutions, simple spreadsheets, and numerical-method platforms. What is missing today is clear guidance on how to apply a biofilm model to obtain accurate and meaningful results. Here, we present a five-step framework for good biofilm reactor modeling practice (GBRMP). The first four steps are (1) obtain information on the biofilm reactor system, (2) characterize the influent, (3) choose the plant and biofilm model, and (4) define the conversion processes. Each step demands that the model user understands the important components and processes in the system, one of the main benefits of doing biofilm modeling. The fifth step is to calibrate and validate the model: System-specific model parameters are adjusted within reasonable ranges so that model outputs match actual system performance. Calibration is not a simple ‘by the numbers’ process, and it requires that the modeler follows a logical hierarchy of steps. Calibration requires that the adjusted parameters remain within realistic ranges and that the calibration process be carried out in an iterative manner. Once each of steps 1 through 5 is completed satisfactorily, the calibrated model can be used for its intended purpose, such as optimizing performance, trouble-shooting poor performance, or gaining deeper understanding of what controls process performance.
1 July 2014 in Bioresource Technology