1 January 2023 in Machine Science Journal
31 March 2022 in Radiation Effects and Defects in Solids
The selection of appropriate materials for radiation environments is critical due to the harsh and aggressive conditions found in such environments, which are liable to degrade material properties. Therefore, durability of materials should be tested before being deployed. In this respect, proton tests are required for the materials to be used in the space environment because dominant galactic cosmic rays mostly comprised high energy protons. Bulk metallic glasses are candidate for space environment due to their desirable properties such as high strength, high corrosion resistance, and lack of grain boundaries. In this present study, we report the effect of a 30 MeV proton beam irradiation on the structural, thermal, mechanical, and magnetic properties of partially crystalline bulk amorphous Fe-based metallic glass. Defect size increment in positron annihilation lifetime spectroscopy and small intensity changes on the X-ray diffraction peaks of samples were observed after the irradiation that can be attributed to increasing free volumes. In addition, changes in crystallisation and glass transition temperatures were examined in differential scanning calorimetry. Furthermore, rise in coercivity which is a magnetic property was observed in vibrating sample magnetometer that may associate with the defect size increment. On the other hand, any changes were not observed on the microhardness measurements.
26 May 2025 in UNEC journal of engineering and applied sciences
The local structural evolutions and stabilities of bulk and nanoparticles (NPs) of FeNi3 crystalline alloys with particle sizes of 2, 4 and 6 nm were studied using classical molecular dynamics (MD) simulation method combined with embedded atomic model (EAM) in Large Scale Atomic/Molecular Massively Parallel Simulator (LAMMPS). The formation, evolution and stability of the structures were analyzed over a wide temperature range (300-1700 K) by calculating radial distribution functions (RDF), interatomic distances (ID), coordination numbers (CN), core-surface concentration profiles, Voronoi analysis and surface energies (SE) dependence on particle size and temperature. Structural analysis showed that all NPs deformed at high temperatures, but the deformation became negligible when the particle size increased to 6 nm, with 6 nm particles showing the most thermostable behavior. The CN of the 6 nm particle was calculated as 11.7 at 300 K and remained almost constant between 11.7 and 12 throughout the heat treatment. Voronoi analysis revealed that NPs with diameters of 4 and 6 nm have almost the same topological structure in the crystalline phase at 300 K, with the main polyhedra for cubic and spherical NPs consisting of pentagonal, hexagonal and rectangular facets corresponding to the truncated-octahedron and tetra-decahedron. It was found that the surface energy of spherical NPs tends to decrease up to 1300 K, indicating that the NPs become more stable at higher temperatures. This anomalous situation can be explained by the formation of higher atomic order and higher configuration density in the surface regions of NPs compared to the core regions, resulting in a decrease in the surface entropy of NPs.
1 April 2025 in Applied Solar Energy
The study summarizes the research conducted worldwide on the design and implementation of hybrid energy systems combining wind and solar energy to generate
1 January 2023 in Machine Science Journal
The effects of particle size (2-6 nm) and temperature (300-1900 K) on the stability and local structural evolutions of amorphous bulk and nanoparticles of the FeNi3 alloys have been studied by using classical molecular dynamics (MD) simulation method combined with embedded atom model (EAM) in Largescale Atomic/Molecular Massively Parallel Simulator (LAMMPS). The nanoparticles were obtained from the unstable amorphous bulk FeNi3 alloys. MD simulations have been performed for glassy FeNi3 intermetallic alloy by making use of pairwise interatomic interaction potentials and electron densities calculated via EAM method. The formation and evolution of structures and their stability have been analyzed at a wide temperature range (300-1900 K) by calculating radial distribution functions (RDF), interatomic distances (ID), coordination numbers (CN), core-to-surface concentration profiles, as well as Voronoi analysis. According to the results, although some deviations in the structural properties occurred during the heat treatment, the amorphous nanoparticles exhibited the same crystal structure and local atomic configuration with its bulk counterpart at room temperature.