13 December 1993 in Physical Review Letters
We present theoretical and experimental results of the leading order angular correlations of second harmonic light generated inside random media, for both the transmission and reflection geometries. We find the striking result that correlations in reflection of the second harmonic light scales with the sample thickness L, in sharp contrast to the corresponding short-range correlation function in reflection of the fundamental light in the linear scattering regime, which scales with mean free path .
11 June 2013 in ISRN Geophysics
Characterizing the streaming potential and electroosmosis properties of porous media is essential in applying seismoelectric and electroseismic phenomena for oil exploration. Some parameters such as porosity, permeability, formation factor, pore size, the number of pores, and the zeta potential of the samples can be obtained from elementary measurements. We performed streaming potential and electro-osmosis measurements for 6 unconsolidated samples made of spherical polymer particles. To check the validity of the measurements, we also used alternative analysis to determine the average pore size of the samples and, moreover, used a sample made of sand particles to determine the zeta potential.
24 April 2020 in The Journal of Mathematical Sociology
Cooperation for public goods poses a dilemma, where individuals are tempted to free ride on others’ contributions. Classic solutions involve monitoring, reputation maintenance and costly incentives, but there are important collective actions based on simple and cheap cues only, for example, unplanned protests and revolts. This can be explained by an Ising model with the assumption that individuals in uncertain situations tend to conform to the local majority in their network. Among initial defectors, noise such as rumors or opponents’ provocations causes some of them to cooperate accidentally. At a critical level of noise, these cooperators trigger a cascade of cooperation. We find an analytic relationship between the phase transition and the asymmetry of the Ising model, which in turn reflects the asymmetry of cooperation and defection. This study thereby shows that in principle, the dilemma of cooperation can be solved by nothing more than a portion of random noise, without rational decision-making.
13 May 2016 in Geophysics
Electrokinetic phenomena are the result of a coupling between a fluid flow and an electric current flow in porous rocks. The zeta potential is an important parameter that influences the electrokinetic coupling. Most reservoir rocks are saturated or partially saturated by natural water containing various types of ions. Therefore, it is important to understand how the zeta potential and therefore the electric double layer (EDL) behave for different types of ions or electrolytes. Types of electrolytes influence the zeta potential most by affecting the surface charge — by changing the thickness of the EDL and the exact location of the shear plane. To study the dependence of the zeta potential on various electrolytes, we have carried out streaming potential measurements for consolidated rock samples saturated by monovalent and divalent electrolytes. From streaming potential coefficients, the zeta potential is obtained for different systems of electrolytes and rocks. The experimental results of silica-based rocks are then compared with theoretical models. For 1:1 or 1:2 electrolytes, a theoretical model for the zeta potential that has been available in literature is used. For 2:2 or 2:1 electrolytes, we have developed a new model to calculate the Stern potential and the zeta potential. The comparison found that the theoretical models can explain the main behavior of the zeta potential against types of electrolytes and types of silica-based rocks. The results show that the zeta potential for monovalent electrolytes is higher than that for divalent electrolytes. The zeta potential of the silica-based samples is higher than that of the nonsilica-based samples when they are saturated by the same types of electrolyte.
22 April 2019 in International Journal of Geophysics
Large density fluctuations developing near the phase transition point of the binary mixture affect physical parameters directly related to the electrokinetic coupling coefficient. Here the first electrokinetic measurements for a porous rock sample are carried out with a critical binary mixture of triethylamine-water, especially around the phase transition point. From the measured streaming potential coefficient, the zeta potential is obtained for the critical composition. The results show that there is no anomaly in the streaming potential coefficient as the temperature approaches the demixing temperature. It is also seen that the streaming potential coefficient and the zeta potential in magnitude decreases with increasing temperature. This observation is opposite to what has been observed in literature. It means that the properties of the electric double layer for the mixtures are different from those for aqueous electrolytes. Additionally, the zeta potential for the critical composition is predicted to fluctuate around the critical point.
13 June 2022 in Ironmaking & Steelmaking: Processes, Products and Applications
The refractory thickness of the blast furnace hearth is a critical parameter for the safe operation of a blast furnace. A replacement of the refractory comes with high costs and, therefore, unnecessary repairs should be avoided. A promising method to estimate the refractory thickness is the impact-echo method. For the interpretation of impact-echo, often, the peaks in the spectrum of the measured signal are associated with the echo from an interface. In this paper, it is shown that this method should be used with care when applied to multi-layered structures. An alternative approach is presented for the calculation of the thickness of multi-layered structures. This method solves the wave equation based on transmission line theory. The formula is checked against 2D finite element analysis and for simple layered structures, good agreement is found. Three cases are simulated using finite element models. Both the impact-echo method and the proposed method overestimate the refractory thickness.