18 May 2020 in IEEE Antennas and Wireless Propagation Letters
Conventional least mean square (LMS) algorithm is one of the most popular algorithms, which is widely used for adaptive beamforming. But the performance of the LMS algorithm degrades significantly because the constant step size is not suitable for varying signal-to-noise ratio (SNR) scenarios. Although numerous variable step size LMS (VSS-LMS) algorithms were proposed to improve the performance of the LMS algorithm; however, most of these VSS-LMS algorithms are either computationally complex or not reliable in practical scenarios since they depend on many parameters that are not easy to tune manually. In this letter, a fast and robust VSS-LMS algorithm is proposed for adaptive beamforming. The variable step size is obtained based on normalized sigmoid function, where the sigmoid function is calculated by using the mean of instantaneous error firstly and then normalized by the squared cumulative sum of instantaneous error and estimated signal power. The proposed algorithm can update the step size adaptively without tuning any parameter and outperform state-of-the-art algorithms with low computational complexity. The simulation results show better performance of the proposed algorithm.
19 June 2019 in IEEE Antennas and Wireless Propagation Letters
Conventional direction-of-arrival (DOA) estimation methods based on subspace decomposition are computationally complex and difficult to implement in practical applications. Although a fixed-step-size least mean square (FSS-LMS) algorithm for DOA estimation has overcome the complexity problem; however, the manual selection of suitable step size is difficult. In this letter, a variable-step-size LMS algorithm is proposed for DOA estimation. In the proposed method, the step size is updated by using the estimated signal power and the cumulative sum of squared instantaneous error, and the spatial spectrum is obtained by the reciprocal of array pattern, where the peak values indicate the estimated DOAs of signals. The proposed method can choose step size adaptively and provide better performance with low computational complexity. The performance of proposed method is verified by the numerical simulations and compared with some existing methods.
20 May 2019 in IEEE Transactions on Antennas and Propagation
In scenarios of rapidly moving interference and look direction error, the robustness and the output signal to interference and noise ratio (SINR) of conventional wideband adaptive beamforming methods will be degraded severely. In order to solve these problems, a robust wideband adaptive beamforming with null broadening and constant beamwidth is proposed. In the proposed method, a taper matrix is firstly constructed by adding virtual interferences for null broadening, where the reference frequency and the number of virtual interferences of the taper matrix are determined based on numerical methods. Sequentially, the array covariance matrix is reconstructed based on the taper matrix. Then, the spatial response variation (SRV) constraint is applied for a constant beamwidth over the entire frequency band. Finally, the adaptive weight vector for null broadening and constant beamwidth is obtained by using the Lagrange multiplier method. The effectiveness of proposed method is verified by numerical simulations.
25 August 2020 in IEEE Signal Processing Letters
We develop a new tensor model for slow-time multiple-input multiple output (MIMO) radar and apply it for joint direction-of-departure (DOD) and direction-of-arrival (DOA) estimation. This tensor model aims to exploit the independence of phase modulation matrix and receive array in the received signal for slow-time MIMO radar. Such tensor can be decomposed into two tensors of different ranks, one of which has identical structure to that of the conventional tensor model for MIMO radar, and the other contains all phase modulation values used in the transmit array. We then develop a modification of the alternating least squares algorithm to enable parallel factor decomposition of tensors with extra constants. The Vandermonde structure of the transmit and receive steering matrices (if both arrays are uniform and linear) is then utilized to obtain angle estimates from factor matrices. The multi-linear structure of the received signal is maintained to take advantage of tensor-based angle estimation algorithms, while the shortage of samples in Doppler domain for slow-time MIMO radar is mitigated. As a result, the joint DOD and DOA estimation performance is improved as compared to existing angle estimation techniques for slow-time MIMO radar. Simulation results verify the effectiveness of the proposed method.
3 August 2023 in IEEE Internet of Things Journal
Through-the-wall radar (TWR) achieves indoor human activity recognition by extracting Doppler and micro-Doppler features. However, the conventional deep learning-based human activity recognition methods have the shortcomings of low accuracy and long inference time. To solve these problems, a lightweight multi-scale neural network for indoor human activity recognition based on macro and micro-Doppler features (TWR-FMSN) is proposed in this paper. In the proposed method, the trajectories of macroscopic Doppler and microscopic Doppler features are defined firstly and the integrated models are applied to label the trajectories at both scales for recognition. An efficient attention-mechanism-based lightweight target detection neural network with Lagrangian trajectory estimation is proposed to obtain macro-Doppler features of human motion. In addition, a kernel-distance-based micro-Doppler labeling method is utilized to obtain the micro-Doppler features of human motion. Finally, all the extracted macro-Doppler and micro-Doppler features are concatenated together for the decision of indoor human activity recognition. The effectiveness of proposed method is verified by experiments, and the results show that the proposed method can significantly reduce the inference time while retaining high recognition accuracy, which shows great potential in real-time deployment for the practical application.
10 October 2022 in IEEE Transactions on Geoscience and Remote Sensing
To solve the problems of reduced accuracy and prolonging convergence time of through-the-wall radar (TWR) human motion due to wall attenuation, multipath effect, and system interference, we propose a multilink auto-encoding neural network (TWR-MCAE) data augmentation method. Specifically, the TWR-MCAE algorithm is jointly constructed by a singular value decomposition (SVD)-based data preprocessing module, an improved coordinate attention module, a compressed sensing learnable iterative shrinkage threshold reconstruction algorithm (LISTA) module, and an adaptive weight module. The data preprocessing module achieves wall clutter, human motion features, and noise subspaces separation. The improved coordinate attention module achieves clutter and noise suppression. The LISTA module achieves human motion feature enhancement. The adaptive weight module learns the weights and fuses the three subspaces. The TWR-MCAE can suppress the low-rank characteristics of wall clutter and enhance the sparsity characteristics in human motion at the same time. It can be linked before the classification step to improve the feature extraction capability without adding other prior knowledge or recollecting more data. Experiments show that the proposed algorithm gets a better peak signal-to-noise ratio (PSNR), which increases the recognition accuracy and speeds up the training process of the back-end classifiers.