17 March 2023 in IEEE Transactions on Antennas and Propagation
This paper proposes a transmission-type linear-to-multi-polarization converter based on cascading four-layer metasurface integrated with PIN diodes. By controlling the states of the PIN diodes, the polarization maintaining (PM) which means transmission without conversion, linear to linear (LTL), linear to right-hand circular polarization (LTRCP), linear to left-hand circular polarization (LTLCP) conversions can be realized. When the PM is realized, the incident wave will pass through the polarizer with low loss over wideband, the isolation is higher than 30 dB. When the linear-to-circular polarization conversion is realized, the incident linearly polarized (LP) wave can be converted to left-hand circularly polarized (LCP) or right-hand circularly polarized (RCP) wave with a relative bandwidth over 40%. When the LTL polarization conversion is realized, the polarization conversion ratio (PCR) is greater than 0.9 from 2.58 to 3.89 GHz. The overlapping bandwidth of the four operating states is 36%. The detailed design process and equivalent circuit of the proposed polarizer are analyzed in this paper. A sample consisting of 10 × 10 elements is fabricated. The measured and simulated results are in good agreement. To the authors’ best knowledge, this is the first reported reconfigurable polarizer capable of PM, LTLCP, LTRCP, and LTL polarization conversions within wideband. The proposed device can play an important role in polarization diversity and RF-integrated aperture of wideband channel multiplexing technology.
12 March 2024 in IEEE Transactions on Antennas and Propagation
We present a wideband reconfigurable polarization rotator based on a metasurface with a ring-shaped structure (RSS) and PIN diodes. By switching the PIN diodes, we can adjust the polarization angle of the reflected linearly polarized (LP) wave from -53° to 53° in steps of approximately 10°, achieving 11 polarization states. The polarization rotation angle is stable over a 30% fractional bandwidth from 2.9 to 3.9 GHz. We fabricate and measure a prototype, which agrees well with the simulation results. We validate our method through theoretical analysis, simulation design, and experimental testing. To the best of our knowledge, this is the first reconfigurable reflective polarization rotator that can realize real-time and stable control of the polarization rotation angle over a wide frequency band. Our device has potential applications in radar detection, microwave imaging, RFID, parabolic antennas, etc.
22 February 2024 in Journal of Applied Physics
In this paper, a wideband polarization reconfigurable omnidirectional antenna (PROA) based on a single-substrate active metasurface is proposed. By controlling the states of the PIN diodes, the antenna can selectively radiate an omnidirectional linearly polarized wave and an omnidirectional circularly polarized wave. The reflection coefficient, axial ratio (AR), radiation pattern, and gain of the proposed antenna have been analyzed from the perspective of simulation and measurement. The measured results show that the PROA has a wide overlapped bandwidth from 2.87 to 3.67 GHz (relative bandwidth 24.46%). To the authors' best knowledge, this is the first reported wideband PROA based on a single-substrate reconfigurable polarization converter. This study not only offers a novel approach to design PROAs, but also greatly reduces the design complexity of the feed source compared with the traditional design method of PROAs.
23 November 2025 in Electromagnetics