Yu Wang

Yu Wang


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 March 2023 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
HZHongcheng Zhou
Hongcheng Zhou
XYXiaoran Yu
Xiaoran Yu
PWPing Wang
Ping Wang
YWYu Wang
Yu Wang
ZYZhongming Yan
Zhongming Yan
This paper proposes a transmission-type linear-to-multi-polarization converter based on cascading four-layer metasurface integrated with PIN diodes. By controlling the states of the PIN diodes, the polarization maintaining (PM) which means transmission without conversion, linear to linear (LTL), linear to right-hand circular polarization (LTRCP), linear to left-hand circular polarization (LTLCP) conversions can be realized. When the PM is realized, the incident wave will pass through the polarizer with low loss over wideband, the isolation is higher than 30 dB. When the linear-to-circular polarization conversion is realized, the incident linearly polarized (LP) wave can be converted to left-hand circularly polarized (LCP) or right-hand circularly polarized (RCP) wave with a relative bandwidth over 40%. When the LTL polarization conversion is realized, the polarization conversion ratio (PCR) is greater than 0.9 from 2.58 to 3.89 GHz. The overlapping bandwidth of the four operating states is 36%. The detailed design process and equivalent circuit of the proposed polarizer are analyzed in this paper. A sample consisting of 10 × 10 elements is fabricated. The measured and simulated results are in good agreement. To the authors’ best knowledge, this is the first reported reconfigurable polarizer capable of PM, LTLCP, LTRCP, and LTL polarization conversions within wideband. The proposed device can play an important role in polarization diversity and RF-integrated aperture of wideband channel multiplexing technology.

4 January 2019 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
CTCheng Tan
Cheng Tan
YWYu Wang
Yu Wang
ZYZhongming Yan
Zhongming Yan
XNXinyi Nie
Xinyi Nie
YHYonghai He
Yonghai He
WCWeirong Chen
Weirong Chen

23 May 2018 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
YHYanwen Hu
Yanwen Hu
YWYu Wang
Yu Wang
ZYZhongming Yan
Zhongming Yan
MJMingyang Jiang
Mingyang Jiang
LLLe Liang
Le Liang
In this paper, a new structure of coilgun with stepped coil winding was designed. The performance of this structure was investigated and compared to the conventional coilgun with uniform diameter stator coil (UDSC) winding. It can be seen from the results that the trigger position of this new structure moves forward with respect to the conventional coilgun. In order to compare the results, the inductance of the two coils is set to the same. If the initial voltage of the capacitor is lower, as the armature at the optimum trigger position, the muzzle velocity of armature in the conventional UDSC coilgun is relatively larger. Conversely, if the initial voltage of the capacitor is higher, the muzzle velocity of armature in the new structure coilgun is relatively larger. According to the simulation results with the increase of voltage, the difference is more and more obvious. Through the single-stage preliminary experiment in our laboratory, the results were in good agreement with the simulation results. And the trigger position is more forward, so the interaction time between the armature and the coil will be longer. Besides, the coil with stepped structure will increase the efficiency of the coilgun when the voltage level is higher.

19 November 2018 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
XWXiufang Wang
Xiufang Wang
YWYu Wang
Yu Wang
YHYanwen Hu
Yanwen Hu
YHYingda He
Yingda He
ZYZhongming Yan
Zhongming Yan
A spiral superconducting metamaterials with an effective negative permeability is presented for efficient wireless power transfer (WPT) using magnetic resonant coupling . The S parameters and resonant frequency of superconducting metamaterials unit cell are computed for analysis. The effective permeability of the unit cell of superconducting metamaterials is derived by S parameter method and an analysis of the resonant modes is performed by full-wave simulation. The 3×3 planar superconducting metamaterials slab is designed by the proposed unit cell to verify their effects in a WPT system. The effects of superconducting on efficiency enhancement are analyzed by both S parameter and magnetic field distribution simulation. The optimal position of the superconducting metamaterials is acquired by analyzing the transfer effiency. We show with simulation results that the transfer efficiency of the system can be improved significantly by the superconducting metamaterials through enhanced the evanescent wave coupling and with the lower loss properties of superconductor.

4 November 2019 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
LLLe Liang
Le Liang
YWYu Wang
Yu Wang
ZYZhongming Yan
Zhongming Yan
HDHuimin Deng
Huimin Deng
WCWeirong Chen
Weirong Chen
This paper puts forward a method based on high temperature superconducting (HTS) current limiting technology, to improve the over-current stability for a battery unit in a superconducting magnetic energy storage (SMES)-battery hybrid energy storage systems (HESS). In contrast to supercapacitors, flywheels and other energy storage systems, SMES-battery HESS possess the technical properties of power capacity, energy and response speed, among other. Thus, SMES-battery HESS may be utilized to handle power swing, energy transfer, voltage fluctuation and related transient stability issues. But an over-current in a battery unit is harm to its cycle life of the battery. Hence, the internal protection system of the battery unit is used to remove a fault by cutting off its outputs. In this paper, a ${\rm{YBa_{2}Cu_{3}O_{7-X}\ (YBCO)}}$ thin film is employed as the protection device to limit the over-current in a battery unit. In normal operation, the thin film is in the superconducting state, and its influence on the system can be ignored. An over-current will be limited evidently lower than the action threshold of the internal protection system by the quench resistance of the thin film. Therefore, the whole outputs of a battery unit will not be interrupted and restarted. Through the verification experiment carried out in our laboratory, the proposed protection method operated as expected, and the stability, as well as the reliability of the battery unit, could be improved.

19 August 2020 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
YHYanwen Hu
Yanwen Hu
YWYu Wang
Yu Wang
ZYZhongming Yan
Zhongming Yan
JAJing Ai
Jing Ai
This paper presents a novel method to design a linear-tocircular polarization converter (LCPC) by using a hybrid array structure, which is composed of meander-lines and the split ring resonators (SRRs). The LCPC can respond to both the E-field and Hfield for the incident wave. When the meander-line and the SRR are placed along two orthogonal directions, the composed unit cell would have different electromagnetic response characteristics in the two orthogonal directions. Using this method, two LCPCs working in frequency bands of 6-18 GHz and 2-6 GHz, are designed respectively. The simulated results show that, for the LCPC working in 6-18 GHz, the axial ratio (AR) is lower than 3 dB in 6.8-17.32 GHz with a maximum insertion loss (IL) of 1.25 dB. When the angle of incident wave is less than 45°, the 3 dB AR bandwidth is 7.87 GHz. For the LCPC working in 2-6 GHz, the AR of entire frequency band is all lower than 3 dB and the maximum IL is 0.82 dB when the incident angle increases to 15°. Even at incident angle of 45°, the bandwidth with the function of polarization conversion is 3.5 GHz. Experiments on the LCPC (6-18 GHz) are carried out, and the measured results are in agreement with the simulated ones, which proves that the LCPCs design method proposed in this paper is effective and reliable.