8 January 2020 in Journal of Materials Chemistry A
With the rapid growth of the world population and water contamination, nanofiltration membranes with extraordinary permeance and high salt rejection are eminently desirable for addressing global water scarcity. Here, an innovative approach to design thin film composite (TFC) membranes with ultrahigh permeance via hydrogel assisted interfacial polymerization is reported. The hydrogel containing piperazine (PIP) monomers serving as an aqueous phase in interfacial polymerization enable homogeneous interfacial polymerization, reducing the diffusion rate of the PIP monomers, and providing mechanical strength to the thin polyamide (PA) selective layer. As a result, the synthesized advanced TFC membranes have ultrahigh high permeances of 52.8 and 62.9 L m−2 h−1 bar−1 while maintaining satisfactorily high rejections of 96.4% and 93.5% for Na2SO4, demonstrating a desalination performance superior to the PA TFC nanofiltration membranes reported so far. Moreover, the mechanism behind the exceptional high permeance is delineated by exploring theoretical hydrogel assisted interfacial polymerization via simulation. Most importantly, the fabrication process of the hydrogel-TFC membranes is simple, enabling cost-efficient and scalable manufacturing.
23 July 2012 in Applied Physics Letters
The effects of growth temperature on the microstructure evolution and electrical transport properties of Cu2O films were investigated. Nanocrystalline Cu2O films with modest p-type semiconducting properties (Hall mobilities ∼20 cm2/Vs, hole concentrations ∼1016 cm−3) were successfully prepared at room temperature without post-annealing. Bottom gate and top contact p-channel Cu2O thin-film transistors (TFTs) were constructed on flexible polyethylene terephthalate substrates at room temperature, which shows superior transfer performance (field effect mobility ∼2.40 cm2/Vs and current on/off ratio ∼3.96 × 104). The low processing temperature and the good electrical performance of the p-type Cu2O TFTs suggest their good potential for applications in high-throughput and low-cost electronics.
14 June 2019 in Advanced Materials
6 February 2012 in Applied Physics Letters
The electronic band structure and p‐type conductivity of CuAlO2 films were modified via synergistic effects of energy band offset and partial substitution of less‐dispersive Cu+ 3d10 with Cu2+ 3d9 orbitals in the valence band maximum by alloying nonisovalent Cu‐O with CuAlO2 host. The Cu‐O/CuAlO2 alloying films show excellent electronic properties with tunable wide direct bandgaps (∼3.46–3.87 eV); Hall measurements verify the highest hole mobilities (∼11.3–39.5 cm2/Vs) achieved thus far for CuAlO2 thin films and crystals. Top‐gate thin film transistors constructed on p‐CuAlO2 films were presented, and the devices showed pronounced performance with Ion/Ioff of ∼8.0 × 102 and field effect mobility of 0.97 cm2/Vs.
1 January 2020 in Polymer
24 April 2020 in Industrial & Engineering Chemistry Research