16 March 2022 in IEEE Transactions on Intelligent Transportation Systems
In recent years, with the rapid development of Advanced Driver Assistance Systems (ADAS), vehicular millimeter-wave (mmWave) radar plays an important role in urban intelligent transportation system. Self-interference caused by multipath in radar channel is a widely concerned problem. However, the research on radar channel propagation characteristics is very limited and there are few models for radar channel available. In this paper, we propose a pioneering research for radar channel model. Based on measurement data, channel characteristics are analysed using the space-alternating generalized expectation-maximization (SAGE) algorithm. An empirical statistical model is established for the 77GHz mmWave radar channel in the underground parking lot scenario, which is one of the most challenging environments because of time-variation and abundant multipaths, filling the gap in the field. A path-association algorithm is used to obtain multipath component (MPC) trajectories in delay, Doppler frequency and power domains. Additionally, some trajectory (in range domain) features are analysed. Moreover, based on geometric analysis of trajectories in range domain, the deterministic component of trajectories is modeled, and then a novel method for discrimination between actual targets and ghost images is proposed and verified by simulation and measurement data.
24 May 2023 in IEEE Transactions on Intelligent Transportation Systems
Automotive radar sensors are widely used in vehicles so as to allow the “advanced driver assistance systems (ADAS)” to work. As far as we are concerned, no mandatory regulations were established so far for interference control in the cases where multiple vehicles equipped with automotive radars exist in close proximity. Consequently, those inter-vehicle cross-interference easily result in the radar performance degradation, e.g. incapability of target detection and identification. In this paper, an interference suppression algorithm is proposed which utilizes two Recursive-Least-Square (RLS) adaptive filters to estimate, the interference signals caused by the “aggressor” radar and the echo signals from the “ego” radar. The algorithm operates in the iterative mode with its initial input being the originally received beat signals involving interference. In each iteration, the estimates of the interference signals and of the clean signals are calculated sequentially by the two RLS filters, and the beat signal is updated with parts of the fragments substituted with their interference-mitigated counterparts. Such iterative operations stop when the convergence criterion, e.g. none of the fragments in the beat signals are considered being interfered, is achieved or the iteration number reaches the limit predefined due to the practical constraints. Simulation and measurement results demonstrate that the proposed dual-RLS-based algorithm outperforms the existing methods in terms of lower interference-to-signal ratio resultant and superior capability of retrieving the original range-Doppler profile.
12 December 2024 in IEEE Transactions on Wireless Communications
Integrated Sensing and Communications (ISAC) has been identified as a key technology in the Sixth-Generation (6G) as an enabler for environment-aware communications. Although many communications-centric channel models have been developed for dynamic scenarios, they can hardly be used for sensing applications since they rely on propagation characteristics not directly related with the geometry and trajectories of the objects in the environment. On the other hand, the available sensing models are mostly deterministic, and hence not providing a stochastic description of the sensing characteristics. In this paper, we propose a sensing channel model based on geometric and kinematic parameters, such as the size, shape, position and velocity of the objects. By distinguishing between single- and multi-bounce components, the proposed channel model is able to accurately characterize propagation environments even in dense-scattered scenarios. Moreover, a novel definition is provided for the birth and death processes (BDPs), able to accurately capture the space-time correlation properties of the channels. An example of the model parametrization is provided based on actual measured data. With the channel realization approach, we exhibit the consistence between simulated and measured data and validate the efficacy of the proposed model. The work in this paper is of great significance to construct the bidirectional bridge between channel and the environment, a key point of interest for the future 6G systems.
26 March 2025 in IEEE Transactions on Intelligent Transportation Systems
In current Intelligent Transportation Systems, 4-dimensional (4D) millimeter-wave radar is gradually conquering more important roles. However, the rich multipath phenomena of radar waves can cause virtual images to be mistaken for actual targets. Most existing solutions aim to identify distinguishable features within a single signal frame to differentiate virtual targets from actual ones, but they fail to fully leverage temporal evolution information. Moreover, they are often limited to simple scenarios with low-order bounces and cannot handle extreme high-order bounce cases. To address this gap, in this paper we establish a research methodology based on topology and propagation graph theory, and propose a time-varying 4D trajectory-based physical target discrimination (TPTD) method. This method can handle multipath virtual images formed by arbitrary-order bounces. Its effectiveness and superiority over advanced methods have been qualitatively and quantitatively validated through traceable simulated and measured data. We also discuss in detail the scalability of the algorithm and its potential bottlenecks. The proposed method can be applied to fields such as precise radar sensing and channel modeling, laying the foundation for integrated sensing and communication and autonomous driving.
11 August 2025 in IEEE Open Journal of Vehicular Technology
Vehicle-to-vehicle (V2V) wireless communication is vital for intelligent transportation systems (ITSs). The high mobility of transceivers, along with the complex 3D propagation caused by low antenna heights and short communication ranges, present challenges to propagation modeling. Accurate V2V channel models are crucial for capturing these characteristics to design reliable V2V systems. Existing cluster-based V2V channel models neglect Doppler frequency variations in cluster classification, reducing classification and model accuracy. They describe clusters in single snapshot, missing temporal channel stationarity, and their complex structures slow model generation, hampering ITS applications. This paper presents a cluster-based V2V channel model incorporating quasi-stationary segmentation. First, SAGE algorithm extracts Multipath components (MPCs), followed by clustering and tracking. By analyzing clusters' Doppler frequency variations alongside angle, delay, and power changes, clusters are more accurately classified into global, static and dynamic types. Next, the model uses Correlation matrix distances (CMDs) to perform quasi-stationary segments for each cluster type, characterizing their distributions within each segment via inter- and intra-cluster parameters. This simplifies the model structure compared to single-snapshot models, improving generation efficiency. Segment duration and quantity statistics characterize channel stationarity. The model is validated by comparing simulated second-order channel statistics with comparable models and measured data. Its complexity is evaluated by comparing model generation time with alternative models in the literature.