In this paper, a recently conducted measurement campaign for unmanned-aerial-vehicle (UAV) channels is introduced. The downlink signals of an in-service long-time-evolution (LTE) network which is deployed in a suburban scenario were acquired. Five horizontal and five vertical flight routes were considered. The channel impulse responses (CIRs) are extracted from the received data by exploiting the cell specific signals (CRSs). Based on the CIRs, the parameters of multipath components (MPCs) are estimated by using a high-resolution algorithm derived according to the space-alternating generalized expectation-maximization (SAGE) principle. Based on the SAGE results, channel characteristics including the path loss, shadow fading, fast fading, delay spread and Doppler frequency spread are thoroughly investigated for different heights and horizontal distances, which constitute a stochastic model.

Due to the decrease in cost, size and weight, Unmanned Aerial Vehicles (UAVs) are becoming more and more popular for general-purpose civil and commercial applications. Provision of communication services to UAVs both for user data and control messaging by using off-the-shelf terrestrial cellular deployments introduces several technical challenges. In this paper, an approach to the air-to-ground channel characterization for low-height UAVs based on an extensive measurement campaign is proposed, giving special attention to the comparison of the results when a typical directional antenna for network deployments is used and when a quasi-omnidirectional one is considered. Channel characteristics like path loss, shadow fading, root mean square delay and Doppler frequency spreads and the K-factor are statistically characterized for different suburban scenarios.

Cellular-connected unmanned aerial vehicles (UAVs) have recently attracted a surge of interest in both academia and industry. Understanding the air-to-ground (A2G) propagation channels is essential to enable reliable and/or high-throughput communications for UAVs and protect the ground user equipments (UEs). In this contribution, a recently conducted measurement campaign for the A2G channels is introduced. A uniform circular array (UCA) with 16 antenna elements was employed to collect the downlink signals of two different Long Term Evolution (LTE) networks, at the heights of 0-40m in three different, namely rural, urban and industrial scenarios. The channel impulse responses (CIRs) have been extracted from the received data, and the spatial, including angular, parameters of the multipath components in individual channels were estimated according to a high-resolution-parameter-estimation (HRPE) principle. Based on the HRPE results, clusters of multipath components were further identified. Finally, comprehensive spatial channel characteristics were investigated in the composite and cluster levels at different heights in the three scenarios.

During the last few years, with the decrease of their sizes and costs, Unmanned Aerial Vehicles (UAVs) became more feasible for their use in general-purpose applications. As an important basis for UAV applications, the Air-to-Ground (A2G) radio propagation channel has gained attention in the channel modeling literature. However, whereas the A2G propagation channel is inherently dynamic (time-varying), the majority of the available models do not consider such a time-variability. This paper proposes a channel multi-path component (MPC) tracking algorithm and shows its ability to analyze the data collected by a real A2G measurement campaign in a suburban environment. Based on the obtained results, a time-varying statistical channel model for A2G communications in realistic suburban scenarios is proposed. The model is able to stochastically characterize parameters related to the birth and time-of-life of the multi-path components (MPCs), as well as their evolution in terms of delay, Doppler frequency or magnitude. Correlation coefficients to relate different channel characteristics are also obtained. Our work shows that the MPCs evolution over time for the UAV A2G channel can be described by simple regular patterns.

With the developments on Advanced Driver-Assistance Systems (ADAS), autonomous driving and purely unmanned vehicles, such as the Unmanned Aerial Vehicles (UAVs), the pressure on the requirements for Vehicle-to-Everything (V2X) communications has drastically increased during the last few years. However, a new and appealing horizon is open for V2X applications with the advent of the Sixth Generation (6G) of mobile communications. In this paper, we present a review of V2X standards to offer a holistic perspective on the evolution of this technology toward 6G. Then, the key technological enablers for the 6G V2X are identified, namely (a) Non-Terrestrial Networks (NTNs), (b) Ultra Reliable Low Latency Communications (URLLC), (c) Artificial Intelligence (AI), (d) Integrated Sensing And Communications (ISAC) and (e) propagation channel modeling. For each of these technological enablers, the most recent proposals are thoroughly studied and the open challenges and opportunities identified. Our paper intends to serve as a timely roadmap for the development of future 6G V2X networks.

In this paper, the novel extended space-alternating generalized expectation-maximization (SAGE) algorithm, providing joint propagation channel multi-path component (MPC) estimation and scatterer localization underlying spherical-wavefront multipath model, is proposed. Two geometry-based models are aided for estimating the first and last hop scatterers under different bouncing orders. The performance of the proposed algorithm, as called geometry-aided SAGE (GA-SAGE), is illustrated by means of the Cramér-Rao lower bound derived for parameter estimates and the root-mean-square-estimation-errors (RMSEEs) obtained through and Monte-Carlo simulations, which shows the applicability both near- and far-field estimation. Finally, the GA-SAGE is applied to processing the experimental data obtained from measurements in an indoor office environment by using a single-input multiple-output (SIMO) configuration. The obtained results show that the method proposed outperforms the traditional SAGE algorithm in terms of MPCs estimation accuracy, convergence rate, and the extra capability of localizing scatterers involved in different bouncing order propagation paths. It is considered useful in environment sensing alike applications and makes the GA-SAGE an efficient and effective tool for the development of geometry-based stochastic channel models capable of reproducing channel realizations of the so-called spatial consistency or spatial non-stationarity, which are the basis for the design of transmission technologies using extremely-large antenna array (ELAA) for 5G and beyond.