Cerium orthophosphate (CePO4) nanoparticles were synthesized via wet chemical coprecipitation technique using cerium nitrate hexahydrate for Ce3+ ion and ammonium dihydrogen phosphate for ion source. X-ray diffraction (XRD) analysis suggests that the material belongs to monoclinic crystal system with crystallite size of 49.3 nm. Scanning electron microscope (SEM) and transmission electron microscope (TEM) reveal the surface morphology of the prepared nanoparticles as nanospheres having grain size in the range of 30–50 nm. The energy dispersive X-ray analysis (EDAX) gives elemental composition present in the grown nanomaterial. Thermogravimetric analysis suggests that the structural phase transition is above 800°C. The optical properties include UV-VIS-NIR absorption and the photoluminescence spectrum shows the absorption and emission peaks in the ultraviolet region. The dielectric constant and ac conductivity properties were investigated with regard to change in temperature (40 to 500°C) and frequency (5 kHz to 1 MHz). The dielectric measurement indicates that the transition is diffused and the activation energy values decrease suggesting that the conduction mechanism is due to hopping of the charge carriers from one site to another.
A ternary system of lead niobate–lead zirconate–lead titanate with composition xPN–yPZ–(x-y)PT where and , 0.25, and 0.35 known as PNZT has been prepared by conventional mixed oxide route at a temperature of 1100°C. The formation of the perovskite phase was established by X-ray diffraction analysis. The surface morphology studied by scanning electron microscopy shows the formation of fairly dense grains and elemental composition was confirmed by energy dispersive X-ray analysis. Dielectric properties like dielectric constant and dielectric loss ( and ) indicate poly-dispersive nature of the material. The temperature dependent dielectric constant () curve indicates relaxor behaviour with two dielectric anomalies. The poly-dispersive nature of the material was analysed by Cole-Cole plots. The activation energy follows the Arrhenius law and is found to decrease with increasing frequency for each composition. The frequency dependence of ac conductivity follows the universal power law. The ac conductivity analysis suggests that hopping of charge carriers among the localized sites is responsible for electrical conduction. The ferroelectric studies reveal that these ternary systems are soft ferroelectric.